Noble House 11667 Operating instructions

Brand
Noble House
Model
11667
Type
Operating instructions

This manual is also suitable for

Noble House 11667 is a versatile umbrella base designed to provide a sturdy and stylish foundation for your outdoor umbrella. It can accommodate umbrellas with a maximum diameter of 80 inches, ensuring compatibility with a wide range of umbrella sizes.

The base features a sturdy construction with multiple parts, including a support pole, decorative ring, and adapters for 38mm and 48mm umbrella poles. This allows for easy customization to fit the specific diameter of your umbrella pole.

Assembly is straightforward and can be completed in approximately 30 minutes with the help of another person. The base is designed for use on flat, level surfaces, ensuring stability and preventing tipping.

Noble House 11667 is a versatile umbrella base designed to provide a sturdy and stylish foundation for your outdoor umbrella. It can accommodate umbrellas with a maximum diameter of 80 inches, ensuring compatibility with a wide range of umbrella sizes.

The base features a sturdy construction with multiple parts, including a support pole, decorative ring, and adapters for 38mm and 48mm umbrella poles. This allows for easy customization to fit the specific diameter of your umbrella pole.

Assembly is straightforward and can be completed in approximately 30 minutes with the help of another person. The base is designed for use on flat, level surfaces, ensuring stability and preventing tipping.

Label Picture Description QTY
A Umbrella Base 1
B Support Pole 1
①
Decorative Ring 1
②
Adapter for 38mm
Pole
1
Reminder : Maximum diameter for open Umbrella - 80 inches
Caution : You must read this before you proceed
Umbrella Base
Page 1 OF 5
③
Adapter for 48mm
Pole
1
WARNING: CHOKING HAZARD. Do not allow children to play with plastic wraps or any small parts in this
package.
Notice: As a safety precaution, when your Umbrella is not in use, please close the Umbrella.
Remove Umbrella from this Base and store in safe location
This Base is NOT suited and NOT recommended to be used as a free-standing Umbrella Base.
This Base must be used under a matching table and matching Umbrella size.
ATTENTION: This Umbrella Base is exclusively recommended to be used together under a table with the
matching Umbrella with diameter of 71 inches to 80 inches.
The matching Support Pole diameter: 38mm - 48mm.
Before
Beginning
Assembly:
Page 2 OF 5
Step 1
This Umbrella Base has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Umbrella parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
This is a two person team assembly product.
Place the Support Pole(B) through the Decorative Ring(①) and attach to Umbrella Base(A) as pictured above.
Tighten Support Pole until fully secure.
FRONT FACING
Overview
Umbrella Base (A)
Adapter for 38mm Pole(③)
Adapter for 48mm Pole(④)
Page 3 OF 5
Step 2 - A
Step 2 - B
Used for Umbrella Pole with 48mm diameter.
Insert Adapter for 48mm Pole(③) into the Support Pole(B).
Your Umbrella Base is ready for use.
This Umbrella Base only be used on a flat, level surface.
Used for Umbrella Pole with 38mm diameter.
Insert Adapter for 48mm Pole(F) into the Support Pole(B) first, then put the Adapter for 38mm Pole(②) into the
Adapter for 48mm Pole(③).
Your Umbrella Base is ready for use.
This Umbrella Base only be used on a flat, level surface.
(B)
(B)
Page 4 OF 5
Page 5 OF 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Noble House 11667 Operating instructions

Brand
Noble House
Model
11667
Type
Operating instructions
This manual is also suitable for

Noble House 11667 is a versatile umbrella base designed to provide a sturdy and stylish foundation for your outdoor umbrella. It can accommodate umbrellas with a maximum diameter of 80 inches, ensuring compatibility with a wide range of umbrella sizes.

The base features a sturdy construction with multiple parts, including a support pole, decorative ring, and adapters for 38mm and 48mm umbrella poles. This allows for easy customization to fit the specific diameter of your umbrella pole.

Assembly is straightforward and can be completed in approximately 30 minutes with the help of another person. The base is designed for use on flat, level surfaces, ensuring stability and preventing tipping.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents