Abba Patio AP9388CT Installation guide

Type
Installation guide
9 Feet Umbrella with Tilt and Crank
Installation Manual
Finial
Hub
Vent
Canopy
Crank handling
Crank housing
Low pole
A. Assembled umbrella frame with canopy 1pc
B. Holder pole 1pc
A 1
1
B
Frame & Ribs
Upper pole
Tilt mechanism
Umbrella supplied is fully assembled. Please read instructions
prior to installation.
Take all parts out of the box. If any parts are missing, please do
not return to the place of purchase directly. Please email us.
1. Screw to connect the two
parts (A and B)
1
3. Use one hand to hold the pole
and then press the button.
Use the other hand to hold the
umbrella canopy to tilt left or right
to change its direction.
3
2. Turn the crank handle clockwise
in the up direction to open the
canopy fully, take care not to force
the mechanism. Turn the crank
handle anticlockwise in the down
direction to close the canopy.
To close the umbrella it must be in
the upright position.
2
And if you install this umbrella with your table, please make sure
the crank handle is higher than your table.
The pole diameter is 1.5 inches (38mm) the base diameter
needs to be wider than 1.5 inches.
Shade Sizs(ft) Positioning
MINIMUM Base Size
Suggestions(Ibs)
9 44
55
Thru Table
Free Standing9
2.62 feet
While the base is NOT part of the umbrella frame, it is a crucial
part of the overall components as it gives the umbrella stability
and allows the umbrella to remain upright. Please check below to
choose the suitable base.
Also be sure to follow us on Facebook for promotions and specials offers.
d love to hear your thoughts, and so would other customers.
If you are satisfied with our products and service, please let us know.
If you have questions or feedback, were here to help!
(We will reply you within 24 business hours)
Thanks for choosing products.
We
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Abba Patio AP9388CT Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI