Abba Patio AP9388CTA Installation guide

9 Feet Umbrella with Auto Tilt and Crank

Installation Manual

A 1

Frame & Ribs

Upper pole

Tilt mechanism

Umbrella supplied is fully assembled. Please read instructions

prior to installation.

Take all parts out of the box. If any parts are missing, please do

not return to the place of purchase directly. Please email us.

A. Assembled umbrella frame with canopy 1pc

B. Holder pole 1pc

Screw to connect the two

parts (A and B)

3. To tilt the umbrella, just need to

continue to turn the crank handle

clockwise till the C

part reaches

the bottom.

Turn the crank handle anticlockwise in the down direction to close

the canopy.

To close the umbrella it must be in the upright position.

Shade Sizs(ft) Positioning

MINIMUM Base Size

Suggestions(Ibs)

9 44

Thru Table

2.62 feet

The pole diameter is 1.5 inches (38mm) the base diameter

needs to be wider than 1.5 inches.

And if you install this umbrella with your table, please make

sure the crank handle is higher than your table.

Free Standing