iOttie One Touch 2 Car Mount
The iOttie Easy One Touch 2 provides a safe, versatile & stylish smartphone mounting solution.
Locking Side Arms
One Touch
Trigger Button
Telescopic Arm
Adjustable Knob
Locking Lever
Super Sticky Gel Pad
Adjustable
Bottom Foot
Release Button
• Adheres to either windshield or dashboard.
• Works with most curved & textured dashboards.
• Rinse with warm water to restore tacky suction.
• Mount your device quickly & safely.
• Simple push of a nger locks your
device in place.
• US patented locking mechanism.
• Allows for adjustable gel pad strength for
multiple surfaces.
• Pull down lever once for smooth surfaces.
• Pull down lever twice for textured
surfaces.
• Arm extends from 4 inches to 6.5 inches.
• Telescopic arm allows for safer & easier use.
• Great for use with long & hard to reach
dashboards & windshields.
Super Sticky Gel Pad
Easy One Touch Locking Feature 2-Step Locking
Telescopic Arm
To avoid the possibility of marks or harm to select dashboards, we
recommend you to place the mount onto your windshield.
Air Gap
iOttie Sticky Gel Pad Traditional Suction Cup
Sticky Gel
Mount Smart. Drive Smarter!
Customer Support
Telephone – 201-580-2688
E-mail – [email protected]
Website – www.iOttie.com
One Year Limited Warranty - Satisfaction Guaranteed.
iOttie has you covered. Should anything go wrong with your mount within
the warranty period, iOttie will provide you with a hassle-free replacement.
1. Unpeel dashboard pad cover and place
sticky side on desired dashboard location
*Dashboard pad for dashboard use only
6. Adjust bottom foot to locate proper
position.
9. Adjust cradle in any angle with ball
pivot joint.
5. Place your device inside the mount
rmly to activate the one touch
locking system.
8. Tighten knob to fasten in place.
4. Press side buttons into locking position.
7. Loosen knob to extend telescopic
arm to desired length.
3. Pull down the lever to secure the mount.
a) Pull down once for smooth surfaces.
b) Pull down twice for textured surfaces.
2. Unpeel sticky gel pad cover, place
onto dashboard cover and press down
INSTALLATION INSTRUCTIONS
DASHBOARD PAD INSTRUCTIONS
1. Unpeel dashboard pad cover
2. Place on desired location
3. Mount your device
Dashboard Pad
* iOttie recommends to use included dashboard pad for all dashboard
mounting, this will help mounting on curved and textured surfaces as well
as prevent any potential dashboard damage. Use of the dashboard pad is
not required on the windshield.
/
