Mackie Handy Installation guide

Mackie
Brand
Mackie
Model
Handy
Type
Installation guide
Have questions? Get in touch with us at Mackie.com/support.
The EM-91C condenser microphone is connected to channel 1 and the EM-89D microphone on
channel 2 of the Big Knob Studio. Check the Big Knob Studio manual for tips on getting gains and
monitoring set up (This thing has a lot of switches and jacks, the manual is a lifesaver).
To get sound from the EM-91C, make sure the +48V switch on the Big Knob is on; this will supply power
to the mic and don’t worry, the EM-89D will not be damaged.
To hear yourself and anything else connected to the Big Knob, connect your snazzy new MC-100
headphones to either phones jack (it’s got a cute little headphone icon ). The level for these is
controlled via the knob directly above the jack.
What about the monitors?! Grab those 1/4" cables included in the box and connect the L and R on the
powered CR3-X to the L and R on Monitor A on the Big Knob.
Last but not least, connect your Big Knob Studio via USB to your computer. For a detailed guide, head
back into the manual to get the lowdown, or visit Mackie.com/big-knob.
9
87
6
5
4
32
1
INPUTSSOURCEOUTPUTS
3/4
REC SRC
SELECT
INPUTS 1/2
2-TRACK
2-TRACKMONITOR
B
MONITOR
A
1(L)
2(R)
L
(MONO)
L
R
BAL / UNBAL
R
BAL / UNBAL
USB
L
R
BAL / UNBAL
L
R
BAL / UNBAL
+18VDC
1.5A
POWER
-10dB
+4dB
-10dB
+4dB
1
5/6
2
STEREO IN
9
8
7
6
5
4
3
2
1
This handy kit has all of the key components you need to get professional recordings at home with
tons of room to grow. The diagram below will help you get everything hooked up.
Congratulations on your purchase of the Studio Bundle!
HOOKUP GUIDE
STUDIO BUNDLE
  • Page 1 1

Mackie Handy Installation guide

Mackie
Brand
Mackie
Model
Handy
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents