Commercial Electric 5540 Installation guide

Installation: Structured Media 66-Clip Connection Block

Distributed by: Home Depot U.S.A., Inc.

2455 Paces Ferry Rd., NE, Atlanta, GA 30339

For assistance, call: 1-800-394-7519

HOMEDEPOT.COM

Item #1000015581

Model #5540

Visual Installation Guide

Structured Media 66-Clip Connection Block

1. Detach the 89D mounting bracket from the 50 Pair 66

Block by gently pulling each of the 4 clips that hold them

together. Mount bracket to plywood panel with 2 wood

screws (not included)

2. Route cables through the top and/or bottom of the 89D

mounting bracket, then back out the left and/or right side.

Place the 50 pair 66 block on the brackets and “click” it

into place

3. Remove the minimum amount of cabling jacket from UTP

cables (or similar)

4. Leaving each pair twisted together, route through the

desired slot. Place each wire in it’s own clip and terminate

using a punch down tool

5. Route cross-connect wire pairs through the same slot

that the desired horizontal cable pair is located

Download PDF