Inserting SD card to A and P Camera Series

Zintronic Inserting SD card to A and P Camera Series Operating instructions

  • Hello! I have reviewed the user manual for Zintronic A and P series cameras, focusing on the SD card insertion process for models P5, P5 Pro, P4, P4 M and A5. This manual provides detailed instructions and visual aids to ensure correct SD card installation. I am ready to answer your questions about these procedures or any other aspect of the device mentioned in the document.
  • How do I turn off the P5 camera before inserting the SD card?
    What tool is needed to open the SD card slot on the P5 Pro camera?
    Which direction should the golden pins of the SD card face when inserting it into the P4 camera?
    Where should the golden pins of the SD card face in P5 Pro camera?
    How do I insert SD card into A5 camera?
How to insert SD card to A & P camera series (all
models)
This manual refers to Zintronic® 'A' & 'P' product series.
Table of Contents:
Section I – SD card insertion.
P5 camera SD card insertion.................................................................................................
P5 Pro camera SD card insertion..........................................................................................
P4 camera SD card insertion.................................................................................................
P4 M camera SD card insertion.............................................................................................
A5 camera card insertion.......................................................................................................
P5 camera SD card insertion.
1. Turn off the camera by unplugging DC 12V, take off the dome by unscrewing four screws shown on the photo
below.
2. After you took of the dome turn camera eye to face you (like on the photo).
3. Move the camera eye up to uncover SD slot.
4. Insert SD card (golden pins facing eye of the camera, as shown on picture).
5. Screw back the dome, but be careful not to do it in a bad way. You need to fit the cut in the camera blackfilm to
camera eye, as shown on picture below.
P5 Pro camera SD card insertion.
1. Unscrew two screws on SD card slot, using hex key which is inside your camera box.
2. After unscrewing them, you will see SD card slot.
3. Insert SD card (golden pins facing audio speaker).
4. Screw back the SD card flap.
P4 camera SD card insertion.
1. Unscrew two screws from SD card flap.
2. After unscrewing you will see SD card slot.
3. Insert SD (golden pins facing eye of the camera).
P4 M camera SD card insertion.
1. Unscrew two screws from SD card flap.
2. You will see SD card slot after doing that.
3. Insert SD card (golden pins facing camera speaker) assemble SD card flap and screw it to the body of the
camera.
A5 camera card insertion.
1. Flip the camera upside down, you will see SD card flap, unscrew two screws as shown on picture below.
2. Take away the flap.
3. Insert SD card (golden pins facing the top of the camera).
4. Assemble the SD card flap and screw it to the camera body, remember to screw flap on with the dot facing
towards camera holder.
/