GARO EPGSD Ground Stand Entity User manual

GARO
Brand
GARO
Model
EPGSD Ground Stand Entity
Type
User manual
Art no:380281
Ground Stand Entity PRO EPGSS
Ground Stand Entity PRO SBS EPGSD
Installation instructions
2
EN
3
EN
About this manual
The purpose of this manual is to provide you with the neces-
sary information to install a ground stand for the Entity PRO
models charging stations.
This document contains general descriptions which are
verified to be accurate at the time of printing. However,
because continuous improvement is a goal at GARO, we
reserve the right to make product modifications at any time.
Product function description.
GARO offers two ground stands: EPGSS and EPGSD.
EPGSD
EPGSS
+
+
+
+ + +
Tools and equipment needed
8 mm
TX20, TX25, TX30
* *
* If applicable
To install the Entity PRO
charging station (CS)
This manual does not contain instructions on how to install
a Garo charging station. To install the Entity PRO charging
station refer to the installation manual. All installation must
be carried out by an authorized
installer and comply with local country installation
regulations. If any questions, please contact your
local electrical authority.
Make sure that the ground stand is firmly attached to the
ground before you install a GARO Entity PRO charging
station. Use M10 - M16 screws to fasten the ground stand
to the ground.
4
EN
Before installation
1
0V
2
Dimensions
470 mm
300 mm
1384 mm
200 mm
EPGSD
160 mm
160 mm
55 mm
120 mm
Ø17 mm
225 mm
200 mm
200 mm
1380 mm
EPGSS
160 mm
160 mm
120 mm
55 mm
Ø17 mm
5
EN
1. Prepare the CS bracket for
installation on the ground stand
1
Note: Only if an ethernet cable is used.
2
Note: Only if an control cable is used.
3
Note: Only if you install several CS on the ground
stand. Do this on installation brackets of the charging
stations. Use a cable grommet to seal the hole to the
steelplate.
4
Note: Take notice of the position of the holes. It is possi-
ble to use a double installation bracket - EPIBD (GARO
art. no 354214) or 2 singel installation brackets - EPIBS
(GARO art. no 354213).
6
EN
2. Install the charging station(s) on
the EPGSS
There are two ways to attach the back plate to the base.
It depends on if you are going to attach one or two
GARO Entity Pro charging stations.
1
Note: The short screws are for single CS installation
and the longs screws are for double CS installation.
TX30
2
TX30
6 Nm
3a
TX30
6 Nm
3b
Note: Only when you plan to install two CS units.
7
EN
A
C
D
E
B
CD
E
5
Note: Thread the cables (C, E and D) through the hole
in the bracket (A). Use a zip tie to attach the cables to
the bracket (B). Ethernet cable (E) and control cable (D)
are optional.
TX20
4
8
EN
TX20
3 Nm
6
TX25
4 Nm
7a
A
B
4 Nm
4 Nm
TX25
8 mm
7b
Note: Thread the cables through CS bracket (A) before
you attach the bracket to the pole mount fixture and CS
bracket (B).
9
EN
3. Install double CS bracket(s)
on the EPGSD
x6
x6
x6
x10
1
Note: The short screws are for single CS installation and
the longs screws are for double CS installation.
TX30
6 Nm
2a
TX30
6 Nm
2b
Note: Only when you plan to install two double CS
units.
10
EN
TX20
3
A
C
D
E
B
C
D
E
4
Note: Thread the cables (C, E and D) through the hole
in the bracket (A). Use a zip tie to attach the cables to
the bracket (B). Ethernet cable (E) and control cable (D)
are optional.
11
EN
TX20
4 Nm
5
TX25
4 Nm
6a
4 Nm
4 Nm
A
B
TX25
8 mm
6b
Note: Thread the cables through the double CS bracket
(A) before you attach the bracket to the base and
double CS bracket (B).
GARO E-Mobility AB
Box 203
335 33 Gnosjö, Sweden
Phone +46 370 332 00
info@garo.se
www.garo.se
GARO Finland Oy
Itälahdenkatu 18 a,
FI-00210 HELSNKI, Finland
Telephone: +358 20 752 9030
E-mail: myynti@garo.fi
www.garo.fi
GARO Electric Ireland Ltd
19/307 Northwest Business Park,
Blanchardstown, IE-DUBLIN 15, Irland
Telephone: +35 31 882 00 30
E-mail: info@garo.ie
www.garo.ie
GARO AS
Sankt Hallvardsvei 3,
NO-3414 LIERSTRANDA, Norway
Telephone: +47 32 89 64 50
E-mail: garo@garo.no
www.garo.no,
GARO Polska Sp z.o.o.
Wislawy Szymborskiej 18,
PL-70-784 SZCZECIN, Poland
Telephone: +48 91 881 17 70 , +48
91 424 33 35
Email: info@garo.com.pl
www.garo.com.pl
GARO Electric Ltd
Sales & Customer Service
Unit 16 Urban Express Park,
Aston Hall Road,
Birmingham,
B6 7FH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

GARO EPGSD Ground Stand Entity User manual

GARO
Brand
GARO
Model
EPGSD Ground Stand Entity
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents