urmet domus MT124-017 Technical Manual

Brand
urmet domus
Model
MT124-017
Category
Gateways/controllers
Type
Technical Manual
sec.5b
−−−−
1
2GO! - Technical manual
GATEWAY INTERFACE
SECTION 5B
Gateway DIGIVOICE - 2GO! Ref. 1082/50 2
TECHNICAL SPECIFICATIONS ........................................................2
Description of terminals ................................................................2
INSTALLATION .................................................................................2
CONFIGURATION ............................................................................3
Digivoice column code defi nition for Gateway .............................3
Video signal compensation ..........................................................3
Door unit confi guration on 2GO! Side ..........................................4
System busy time .........................................................................4
Digivoice audio lines ..................................................................... 4
OPERATING MODE ..........................................................................4
Calls ..............................................................................................4
Calls to switchboard ..................................................................... 4
Digivoice main door unit number 980 auto power-on ..................4
Surveillance camera auto-on function ..........................................4
Special decoder 1038/80 control .................................................4
Intercom function .........................................................................4
DEFAULT CONFIGURATION ...........................................................4
TROUBLESHOOTING ......................................................................4
VOP VIDEO DISTRIBUTOR Ref. 1795/40 5
TECHNICAL SPECIFICATIONS ........................................................5
DESCRIPTION OF TERMINALS .......................................................5
ADAPTER DEVICE FOR TV CAMERA Ref. 1742/13A 5
ADAPTER INSTALLATION ...............................................................5
Download from www.urmetdomus.com Technical Manuals area.
SECTION CONTENTS
EXTENDED DIFFERENTIAL VIDEO SIGNAL
REGENERATOR Ref. 1795/250 6
TECHNICAL SPECIFICATIONS ........................................................6
INSTALLATION .................................................................................6
WIRING DIAGRAM ........................................................................... 6
SCAITEL VIDEO MODULE BRACKET TO BE ARRANGED
BY SIDE OF SWITCHBOARD Ref. 1732/957 7
DESCRIPTION OF TERMINALS .......................................................7
INSTALLATION .................................................................................7
Wall-mounted version...................................................................7
TABLE MOUNTED KIT FOR SCAITEL VIDEO MODULE
Ref. 1732/56 .....................................................................................7
INSTALLATION DIAGRAMS 8
CONNECTION OF N 2GO! VIDEO DOOR PHONE
COLUMNS TO 1 VIDEO DOOR UNIT WITH DIGIVOICE
CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c
door unit or video door unit ............................... SV124-0450A .......8
CONNECTION OF N 2GO! VIDEO DOOR PHONE
COLUMNS TO 2 VIDEO DOOR UNITS WITH DIGIVOICE
CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c
video door unit .................................................. SV124-0414A .....12
DIAGRAM NOTES 14
Some products may be described in the “New” section.§
GATEWAY INTERFACE
2
−−−−
sec.5b
2GO! - Technical manual
Gateway DIGIVOICE - 2GO! Ref. 1082/50
4
3
2
1
5
3
2
1
The Gateway Ref. 1082/50 is used to interface the 2GO! and the
Digivoice system to make high-performance complex video door
phone systems (over 8000 users). Up to 255 Gateways can be used,
corresponding to 255 different buildings in the same compound.
All the potentials and extensions of the Digivoice system can be
exploited on street side with a high number of inputs and up to 5
switchboards using 9 common wires. The building risers require 2 non
polarised wires and exploit the features and performance of the 2GO!
system, which include intercom service between apartment stations and
the possibility of using the video door phone answering machine service
Ref. 1082/88, without additional wires.
As for the video signal, an extended differential (DE) video system
consisting of camera video signal converters (Ref. 1742/13A),
video distributors (Ref. 1795/40) and video signal regenerators
(Ref. 1795/250) is used on the Digivoice spine.
43215321
4321
Line terminalGateway
ID dip-switch
Digivoice
terminal board
Digivoice terminal board
2GO! column
terminal board
DE signal
equaliser
dip-switch
TECHNICAL SPECIFICATIONS
Working temperature range: -5 ÷ 45°C
Draw on Digivoice side: 1CU
R1 - R2 terminal draw: 100mA max
DESCRIPTION OF TERMINALS
DIGIVOICE TERMINAL BOARDS
+V Digivoice power unit
0V Digivoice power ground
D Data line
FA Voice out
FB Voice back
R2 Video power
R1 Video power ground
A Differential video signal wire A
B Differential video signal wire B
2GO! TERMINAL BOARDS
LINE Terminal pair for connecting non-polarised bus
INSTALLATION
The Gateways are installed between the Digivoice spine and the 2GO!
risers on the base of each riser. Refer to 2GO! system installation
instructions contained in the system manual provided with the
Ref. 1082/20 power unit for wiring on 2GO! side. Refer to the technical
system manual for Digivoice wiring.
Up to 255 Gateways can be installed. One 2GO! riser can be connected
to each Gateway. The Gateway in the 2GO! system takes the place
of the main door unit with ID=1, while in the Digivoice system it is
seen as a secondary calling system and can assume as column code
one of 255 values set using the 8 dip switches accessible with the
electrical panel is open. No supplementary power units are needed
for the Gateway.
1
2
3
4
LINE4
LINE3
LINE2
LINE1
LINE0
1082/20 1082/50
1795/40 789/2
1038/20
DU
ON
DE
Sch. 1038/20
Sch. 789/2
2
2
7+doble
7+doble
1
2
3
4
LINE4
LINE3
LINE2
LINE1
LINE0
1082/20 1082/50
2
7+doble
4
3
2
1
5
3
2
1
4
3
5
4
3
2
1
5
3
2
1
4
3
5
TC
Briefl y, the system confi guration is as follows.
On the 2GO! riser:
Up to 32 apartment stations (brackets, special decoders, 4+N
adapters, door phones).
Up to 2 door units.
1 power unit.
1 centralised video door phone answering machine (in this case, the
total number of door units or apartment units must be decreased
by 1).
On Digivoice side:
The Gateway is included in the count of the up to 400 devices which
can be connected to a Digivoice system.
Manages one only audio line and one only extended differential
video line (DE).
Observe the following rules:
1. Maximum number of devices on the 2GO! spine
The Gateway on each spine where it is installed must be included
in the total count of 2GO! door units. Therefore, on each 2GO!
riser, there can be two units in total (video door units Ref. 1082/72
and/or door phone units Ref. 1082/7).
2. Type of usable wires and distances
The rules shown in the system manual provided with the 1082/20
power unit apply for connecting the Gateway to the 2GO! system
(LINE terminals). Refer to section 1 for connecting the Gateway to
•
•
•
•
•
•
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
TECHNICAL SPECIFICATIONS
INSTALLATION
GATEWAY INTERFACE
sec.5b
−−−−
3
2GO! - Technical manual
the Digivoice spine. Use a AWG22 (0.28mm
2
) double wire for the
DE signal connection.
TC
1
2
3
4
L
INE4
LINE3
LINE2
LINE1
LINE0
1082/20 1082/50
150m Max.
850m Max.
4
3
2
1
5
3
2
1
4
3
5
789/2
1038/20
DU
ON
DE
Sch. 1038/20
Sch. 789/2
3. Use of line terminals
The Gateway works on 2GO! side as a main door unit. Therefore,
if connected directly to the 2GO! power unit, the terminal must be
ON.
The DE video signal distributor Ref. 1795/40 does not require line
terminals.
4. Installation
The Gateway can be installed in an electrical panel on DIN bar
(10 modules) or wall-mounted using bolts (not provided). Terminal
boards, confi guration dip switches and other settings can be
accessed when the electrical panel is open.
CONFIGURATION
DIGIVOICE COLUMN CODE DEFINITION FOR
GATEWAY
The fi rst step consists in assigning to the Gateway one of 255
possible column codes. The column code is needed to address
the 2GO! column devices using unique codes in the system. There
cannot be two Gateways with the same column code. Refer to the
table shown in the product manual for correspondence between dip
switches and code.
Example:
TC
1
2
3
4
LINE4
LINE3
LINE2
LINE1
LINE0
1082/20 1082/50
1795/40 789/2
1038/20
DU
ON
DE
Sch. 1038/20
Sch. 789/2
31
0
User
1031
User
1000
31
0
User
2031
User
2000
1
2
3
4
LINE4
LINE3
LINE2
LINE1
LINE0
1082/20 1082/50
Dip-switch
10
Dip-switch
20
4
3
2
1
5
3
2
1
4
3
5
4
3
2
1
5
3
2
1
4
3
5
An additional alphabetic keyboard is needed for systems with
more than 99 Gateways. Refer to the Urmet Domus customer
service for correct dip switch settings.
VIDEO SIGNAL COMPENSATION
The distance between the main cameras can be set using the 4 dip
switches on the hood to compensate the extended differential video
signal.
The main camera can be at most 850m from the Gateway.
4
3
2
1
5
3
2
1
4321
0 - 200m
ON
4321
450 - 700m
ON
4321
200 - 450m
ON
4321
700 - 850m
ON
§
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
CONFIGURATION
GATEWAY INTERFACE
4
−−−−
sec.5b
2GO! - Technical manual
The distance of the main camera must be set on the Gateway for the
video signal to be correctly regenerated inside the video power unit
before being transmitted to the column. If some cameras are out of
the set range, set the closest range then use the video regenerator
Ref. 1795/250 for the most distant cameras.
1082/20 1082/50 1038/69
0 ÷ 200m 150m
COLUMN
1795/250
300m
TC
TC
1
200 -
450 m
2
3
DOOR UNIT CONFIGURATION ON 2GO! SIDE
Any video door phone units Ref. 1082/72 or door phone units
Ref. 1082/7 connected to the 2GO! risers must be confi gured as
secondary units because the Gateways works as a main video door
phone unit.
SYSTEM BUSY TIME
The calling modules and the Digivoice switchboards MUST BE
confi gured with a busy time of 40s.
DIGIVOICE AUDIO LINES
Select only one voice line on all Digivoice devices.
OPERATING MODE
In general, all basic functions of the 2GO! and Digivoice systems are
available. Additional functions and differences are illustrated below.
CALLS
Only one call at a time is possible on Digivoice side. After the 40s
busy time, all communications (including ones between a 2GO!
secondary unit and an apartment stations) can be interrupted by a
call in the concerned column.
A sandglass will appear on the apartment station monitor in the
event of a call from a Digivoice door phone unit or Digivoice
switchboard without additional camera.
CALLS TO SWITCHBOARD
There are two options, according to whether the apartment station
column making the call is busy or not.
Column is not engaged by a communication to an apartment station
or is engaged in a communication to a door unit for longer than 30s.
The apartment station monitor making the call will light up and the
sandglass will appear. Column communications where applicable
are interrupted.
If the switchboard operator does not reply after 20 seconds, the
monitor will switch to standby and the call will be stored. Hang up
and wait for the switchboard operator to call back.
If the switchboard operator replies, the sandglass will remain on the
monitor unless the switchboard has a camera (in which case the
camera image will appear).
•
•
•
The column is engaged by a communication to a door unit for
less than 30s: the apartment station monitor will not light up. The
request will be directed to the switchboard where it is stored. The
communication in progress is not interrupted. Hang up and wait for
the switchboard operator to call back.
DIGIVOICE MAIN DOOR UNIT NUMBER 980 AUTO
POWER-ON
There are two options according to whether the door unit is busy or
not.
Door unit idle. The apartment station monitor making the call will
light up and the door unit camera image will appear.
Door unit engaged in a communication. The apartment station
monitor will light up and the sandglass will appear. The monitor will
go out after a few seconds. The communication in progress will be
continued. Try again later.
SURVEILLANCE CAMERA AUTO-ON FUNCTION
Up to 4 surveillance cameras can be connected to the main calling
station number 980. After auto power-on of station 980, press to
cyclically select the surveillance cameras.
SPECIAL DECODER 1038/80 CONTROL
The 2GO! riser users can control the appropriate programmed
Digivoice special decoders using the following buttons:
Switchboard call button.
Staircase lights button (the staircase light command is converted
into a Digivoice special code).
INTERCOM FUNCTION
The intercom function is possible within the 2GO! riser only and not
between users on different risers.
DEFAULT CONFIGURATION
The default settings of the Gateway are:
Column code: 1
Main camera distance dip switch: 0-200m
TROUBLESHOOTING
The yellow LED on the Gateway has a similar function to that of the
2GO! apartment station and indicates anomalies to the 2GO! spine.
Yellow LED on: system fault on 2GO! side. Check the LEDs of all other
2GO! devices in the spine and cut off, if necessary.
The red LED on the Gateway is used for troubleshooting on Digivoice
side.
Red LED on: no Gateway data connection on Digivoice side.
Red LED one blink: Digivoice data transmission or reception.
•
•
•
•
•
•
•
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
GATEWAY DIGIVOICE - 2GO! Ref. 1082/50
OPERATING MODE
DEFAULT CONFIGURATION - TROUBLESHOOTING
GATEWAY INTERFACE
sec.5b
−−−−
5
2GO! - Technical manual
VOP VIDEO DISTRIBUTOR Ref. 1795/40
95 mm
28 mm
64 mm
The video distributor Ref. 1795/40 shares out the differential video
signal from the main cameras on several riser columns (up to four).
Any number of distributors may be connected reciprocally in
series using the passing output.
Only up to 3 distributors can be connected in series using
extension outputs.
TECHNICAL SPECIFICATIONS
Power: 16 ÷ 23Vcc
Uptake: 100mA with 1 active output
280mA with 4 active output
Temperature: -5 ÷ +45°C
DESCRIPTION OF TERMINALS
R1 Video ground
R2 Video power
A, B (IN) Video signal input
A, B (OUT) Video signal output
A, B (I) Video signal output for extension I
A, B (II) Video signal output for extension II
A, B (III) Video signal output for extension III
A, B (IV) Video signal output for extension IV
POWER SUPPLY
Column
Column
Column
Column
Passing output
1795/40
R1R2
R1
AB
output
R2R1
R2AB R1
R2
A
B
B
A
R2
R1
B
A
R2
R1
B
A
R2
R1
Input
III
IV
III
TC
Important: Never fi t the video terminal resistors 82Ω 1/4W.
§
ADAPTER DEVICE FOR TV CAMERA
Ref. 1742/13A
The device is used in Digivoice video door phone systems interfacing
with Gateway Ref. 1082/50.
The adapter must be combined to the following Sinthesi cameras:
Ref. 1745/70 for black and white systems.
Ref. 1745/40 for colour systems.
The adapter transforms the composite video signal from the camera
into two differential video signals (A and B).
ADAPTER INSTALLATION
1. Insert the adapter device to the side of the TV camera unit and
secure it with the screw provided (Fig. 1).
2. Remove connector A from the TV camera module (Fig. 2).
3. Insert connector A in the coupling of the device and connector B
in the coupling of the TV camera (Fig. 3).
4. Position the conductors inside the groove of the device.
A
B
Fig. 1
A
B
Fig. 3
A
B
Fig. 2
•
•
VOP VIDEO DISTRIBUTOR Ref. 1795/40
TECHNICAL SPECIFICATIONS - DESCRIPTION OF TERMINALS
ADAPTER DEVICE FOR TV CAMERA Ref. 1742/13A
ADAPTER INSTALLATION
VOP VIDEO DISTRIBUTOR
ADAPTER DEVICE FOR TV CAMERA
Ref. 1795/40
Ref. 1742/13A
GATEWAY INTERFACE
6
−−−−
sec.5b
2GO! - Technical manual
EXTENDED DIFFERENTIAL VIDEO SIGNAL
REGENERATOR Ref. 1795/250
1
0 -
200 m
2
3
1
200 -
450 m
2
3
1
450 -
700 m
2
3
1
700 -
1000 m
2
3
Sch. 1795/250
IN
OUT
90 mm
103 mm
36 mm
(2 DIN modules)
The video signal regenerator Ref. 1795/250 must be used in extended
differential video systems (VDE) systems in the event of insuffi cient
video compensation regulation on the Gateway interface power unit.
The regenerator receives signals Ai and Bi (differential video input) to
be compensated and outputs signals Ao and Bo (differential video
output) which are compensated and adapted to the distance of the
wires leading to Gateway interface.
Use dip-switches 1 - 2 - 3 as shown below to adjust video compensation
according to distance.
ignore dip-switch 4.
1
0 -
200 m
2
3
1
200 -
450 m
2
3
1
450 -
700 m
2
3
1
700 -
1000 m
2
3
Sch. 1795/250
IN
OUT
1234
1
0 -
200 m
2
3
1
200 -
450 m
2
3
1
450 -
700 m
2
3
1
700 -
1000 m
2
3
Distance
between
TV CAMERA 1
and gateway
(A)
<200 m
<200 m
<200 m
<200 m
200 ÷ 450 m
200 ÷ 450 m
200 ÷ 450 m
450 ÷ 700 m
450 ÷ 700 m
700 ÷ 850 m
Distance
between
TV CAMERA 2
and gateway
(B)
<200 m
200 ÷ 450 m
450 ÷ 700 m
700 ÷ 850 m
200 ÷ 450 m
450 ÷ 700 m
700 ÷ 850 m
450 ÷ 700 m
700 ÷ 850 m
700 ÷ 850 m
Distance set
on gateway
0 ÷ 200 m
0 ÷ 200 m
0 ÷ 200 m
0 ÷ 200 m
200 ÷ 450 m
200 ÷ 450 m
200 ÷ 450 m
450 ÷ 700 m
450 ÷ 700 m
700 ÷ 1000 m
Distance set
on signal
regenerator
Not required
200 ÷ 450 m
450 ÷ 700 m
700 ÷ 1000 m
Not required
450 ÷ 700 m
700 ÷ 1000 m
Not required
700 ÷ 1000 m
Not required
§
GATEWAY
COLUMN
1795/250
TC TC
AB
TECHNICAL SPECIFICATIONS
Power: 18Vcc
Uptake: 180mA
INSTALLATION
The device may be fastened to the wall by means of the bracket
provided or fi tted on a DIN bar.
Lever as shown in the fi gure to access the connection terminals.
WIRING DIAGRAM
A
B
R2
R1
Ai
Bi
R2
R1
Ref.1795/250
IN
Ao
Bo
R2
R1
OUT
From
camera
unit
To riser
column
EXTENDED DIFFERENTIAL VIDEO SIGNAL REGENERATOR Ref. 1795/250
EXTENDED DIFFERENTIAL VIDEO SIGNAL REGENERATOR Ref. 1795/250
TECHNICAL SPECIFICATIONS
INSTALLATION - WIRING DIAGRAM
GATEWAY INTERFACE
sec.5b
−−−−
7
2GO! - Technical manual
INSTALLATION
WALL-MOUNTED VERSION
Proceed as follows to fasten the video module only:
Arrange the duct so that it ends in correspondence with the input
hole.
Fasten the bracket to the wall at the height from the fl oor shown by
means of bolts.
Connect the wires to the specifi c terminals.
Set the correct distance between bracket and camera with the dip
switches.
0-200m 700-1000m450-700m200-450m
Extract the stop bolt A.
Fasten the monitor to the bracket and lock the device by pushing
the bolt “A” inwards.
A
Ref. 1732/957
1,55 m
•
•
•
•
•
•
SCAITEL VIDEO MODULE BRACKET TO BE
ARRANGED BY SIDE OF SWITCHBOARD
Ref. 1732/957
Switchboard
connection wire CN2
The Scaitel video module can be used in combination with
switchboards Ref. 1038/40 so that the operator can see visitors.
Bracket Ref. 1732/957 must be used for installing systems with
Digivoice-2GO! Gateway interface.
DESCRIPTION OF TERMINALS
R1 Video module power negative
R2 Video module power positive
RD Parallel video module power *
0V Control signal ground
CV Video module control signal (from switchboard)
AS Additional video module video signal negative
BS Additional video module video signal positive
AO Video signal negative passing output
BO Video signal positive passing output
AI Input video signal negative
BI Input video signal positive
* System confi guration must include a suitably dimensioned power
unit.
SCAITEL VIDEO MODULE BRACKET TO BE ARRANGED BY SIDE OF SWITCHBOARD Ref. 1732/957
SCAITEL VIDEO MODULE BRACKET TO BE ARRANGED BY SIDE OF
SWITCHBOARD Ref. 1732/957
DESCRIPTION OF TERMINALS
INSTALLATION
GATEWAY INTERFACE
8
−−−−
sec.5b
2GO! - Technical manual
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 1 VIDEO
DOOR UNIT WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c door unit or video door unit
SV124-0450A
VIDEO DOOR PHONE REFERENCES
Atlantico model
N. X Colours video door phone Ref. 1702/40
or
N. X Black/white video door phone Ref. 1702/1
N. X Kit bracket + one user distributor Ref. 1702/701
or
Utopia model
N. X Colours video door phone Ref. 1703/1
N. X Kit bracket + one user distributor Ref. 1703/701
or
Artico model
N. X Black/white video door phone Ref. 1705/1
N. X Kit bracket + one user distributor Ref. 1703/701
CONCIERGE REFERENCES
N. 1 Colour video module Ref. 1732/41
or
N. 1 Black/white video module Ref. 1732/1
N. 1 Concierge switchboard Ref. 1038/40
N. 1 Bracket Ref. 1732/957
MAIN VIDEO OUTDOOR STATION REFERENCES
TC
Sinthesi model
N. 1 Colour camera unit module Ref. 1745/40
or
N. 1 Black/white camera unit module Ref. 1745/70
N. 1 Call module Ref. 1038/13
N. 1 Adaptation device Ref. 1742/13A
The call module must be installed in fl ush-mounting boxes
with module frames or in cases with hood for wall-mounted
versions. Refer to section “Sinthesi call module” of door
phones and video door phones product technical manual for
respective diagrams and installation methods.
K-Steel model
N. 1 Black/white camera unit module Ref. 1755/30A
N. 1 Call module Ref. 1038/16
The call module must be installed in fl ush-mounting boxes
with module frames or in cases with hood for wall-mounted
versions. Refer to section “K-Steel call module” of door
phones and video door phones product technical manual for
respective diagrams and installation methods.
SECONDARY VIDEO OUTDOOR STATION REFERENCES
TC
Sinthesi model
N. X Tv camera unit and door unit with 2 keys Ref. 1082/72
N. X Push button panel Ref. 1145/11-/12-/13-/14
N. X 16-pushbutton expansion module Ref. 1038/17
SECONDARY OUTDOOR STATION REFERENCES
Sinthesi model
N. X Modulo posto esterno Ref. 1082/7
N. X Push button panel Ref. 1145/11-/12-/13-/14
N. X 16-pushbutton expansion module Ref. 1038/17
POWER SUPPLY AND RELAY REFERENCES
N. X Gateway Ref. 1082/50
N. 1 Digivoice power supply Ref. 1038/20
N. K 2GO! power supply Ref. 1082/20
N. 2 Additional power supply unit Ref. 789/3
N. 1 Switchboard power unit Ref. 789/2
N. 1 Switching devic Ref. 1038/69
N. X Video distributor Ref. 1795/40
K = columns number
DIAGRAM NOTES
(see ending section)
CD.001
CD.002
V2.001
V2.004
V2.007
VD.002
VU.002
VU.003
VX.006
VX.008
GATEWAY INTERFACE
sec.5b
−−−−
9
2GO! - Technical manual
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 1 VIDEO
DOOR UNIT WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c door unit or video door unit
MAIN
CONCIERGE
SWITCHBOARD
11
9
SECONDARY
2
2
2
2
2
9
9
2
9
9
9
2
2
2
9
2
2
2
99
SECONDARY
2
2
2
9
2
column
2GO!
column
2GO!
column
2GO!
column
2GO!
column
2GO!
column
2GO!
column
2GO!
column
2GO!
column
2GO!
2
9
2
12
2
2
TC
TC
ELECTRIC
LOCK
ELECTRIC
LOCK
ELECTRIC
LOCK
BLOCK DIAGRAM
GATEWAY INTERFACE
10
−−−−
sec.5b
2GO! - Technical manual
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 1 VIDEO
DOOR UNIT WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c door unit or video door unit
2
2
2
2
31
2
2
2
0
8
(VX.006)
(VX.008)
(V2.004)
(VX.008)
2
MASTER
(VX.008)
(VX.008)
2
8
SECONDARY
2
2
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
AS COLUMN "1"
OR COLUMN "2"
OR COLUMN "3"
2
2
2
2
2
2
2
1
(VU.003)
(CD.002)
(VX.008)
MAIN
(VU.002)
(VD.002)
LINE
IN/OUT
LINE
DER
TC
FB
FA
+V
0V
LINE
D
R1
A
R2
B
III IV
BAR2 R1
OUT
R1
I
R2 A
II
IN
B
B
R1R1
A
B
R2
A
R2
B
R1R1
A
B
R2
A
R2
FB
FA
+V
0V
LINE
D
R1
A
R2
B
LINE
IN/OUT
LINE
DER
0
230
R1
R2 out
R1
RL
V2
R2 in
T
GND
GND
V5
V3
SE-
SE+
PA
GND
SP
TST
LINE
ILL
EXP
III IV
BAR2 R1
OUT
R1
I
R2 A
II
IN
B
B
R1R1
A
B
R2
A
R2
B
R1R1
A
B
R2
A
R2
LINE1
LINE2
230
0
LINE0
LINE3
LINE4
TC
0
230
DU
+V
0V
0D
0V
+F
0F
M1
M2
DE
U1
G/T G/T
~12
~12
~0
~0U2
U3
U4
G/T
~12
~12
~0
~0
G/T
U2
U3
U4
U1
FB
FA LINE
D
+V
0V
B
R2
A
R1
S+
S-
CP
LINE
FB
FA LINE
D
+V
0V
B
R2
A
R1
FB
FA
+V
0V
LINE
D
R1
A
R2
B
FB
FA LINE
D
+V
0V
B
R2
A
R1
Input Output
C
.
.
P1
P2
P3
P8
P9
C
P14
P15
P16
.
.
0
230
R1
R2 out
R1
RL
V2
R2 in
FB
FA LINE
D
+V
0V
B
R2
A
R1
cn2
AI
BI
R1
R2
BO
AO
0V
RD
FB
FA
+V
0V
LINE
D
R1
A
R2
B
+V
FA1
0V
SP
SE+
T1
S1
0V
H
+V
SE-
S2
SC
PH
SL
0V
T2
P
S12
0V
MP1
FB1
D
0F
FA2
FB2
+F
D
MP2
FB
FA
0V
+V
MV
MA
MS
FB
FA LINE
D
+V
0V
B
R2
A
R1
S+
S-
CP
LINE
0
230
RL
in
R1
V2
R2
R1
R2 out
S+
S-
CP
LINE
III IV
BAR2 R1
OUT
R1
I
R2 A
II
IN
B
B
R1R1
A
B
R2
A
R2
B
R1R1
A
B
R2
A
R2
FB
FA LINE
D
+V
0V
B
R2
A
R1
~12
~0
R2
T
B
A
R1
+TC
RPAL
FA2
FB2
S12
CV
SL
SCM
SCT
RPCH
0V S2
S1
FB1
FA1
+F
0F
D
+V
0V
Input
Output
C
.
.
P1
P2
P3
P8
P9
C
P14
P15
P16
.
.
FB
FA
+V
0V
LINE
D
R1
A
R2
B
FB
FA LINE
D
+V
0V
B
R2
A
R1
U1
G/T
U2
U3
U4
R2
V5
0V
+V
RES
0V
T
U
V5
RE
RG
RF
RH TC4
TC3
TC2
TC1
ADDITIONAL
POWER SUPPLY
LINE~
Door Lock
Release
ELECTRICAL
LOCK
LINE~
SWITCHBOARD
POWER SUPPLY
LINE~
DIGIVOICE
POWER SUPPLY
LINE~
ADDITIONAL
POWER SUPPLY
LINE~
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
GATEWAY
VIDEO
DISTRIBUTOR
VIDEO
DISTRIBUTOR
COLUMN "I"
Floor
call button
Floor
call button
Floor
call button
ONE USER
DISTRIBUTOR
ONE USER
DISTRIBUTOR
2GO!
POWER SUPPLY
VIDEO
DISTRIBUTOR
GATEWAY
CONCIERGE SWITCHBOARD
To the following
video door phone
Postal Lock
Release
Door Lock
Release
ELECTRICAL
LOCK
SWITCHING
DEVICE
16-PUSHBUTTON
EXPANSION
MODULE
~12
~0
G/T
~12
~0
SV124-0450A
GATEWAY INTERFACE
sec.5b
−−−−
11
2GO! - Technical manual
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 1 VIDEO
DOOR UNIT WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c door unit or video door unit
2
2
(VX.006)
0
2
31
8
0
(V2.004)
1
1
8
(V2.004)
2
COLUMN "3"
2
(VX.008)
2
COLUMN "2"
31
2
(VX.008)
2
2
2
S+
S-
CP
LINE
LINE
IN/OUT
LINE
DER
LINE
IN/OUT
LINE
DER
U1
G/T G/T
~12
~12
~0
~0U2
U3
U4
G/T
~12
~12
~0
~0
G/T
U2
U3
U4
U1
LINE1
LINE2
230
0
LINE0
LINE3
LINE4
LINE
IN/OUT
LINE
DER
LINE1
LINE2
230
0
LINE0
LINE3
LINE4
LINE
IN/OUT
LINE
DER
U1
G/T
U2
U3
U4
S+
S-
CP
LINE
S+
S-
CP
LINE
S+
S-
CP
LINE
S+
S-
CP
LINE
GND
PA
GND
SP
TST
LINE
ILL
EXP
SE-
SE+
GND
Input Output
C
.
.
P1
P2
P3
P8
P9
C
P14
P15
P16
.
.
Input Output
C
.
.
P1
P2
P3
P8
P9
C
P14
P15
P16
.
.
S+
S-
CP
LINE
LINE~
Floor
call button
Floor
call button
Floor
call button
ONE USER
DISTRIBUTOR
ONE USER
DISTRIBUTOR
2GO!
POWER SUPPLY
To the following
video door phone
LINE~
Floor
call button
Floor
call button
Floor
call button
ONE USER
DISTRIBUTOR
ONE USER
DISTRIBUTOR
2GO!
POWER SUPPLY
To the following
video door phone
SECONDARY
Door Lock
Release
ELECTRICAL
LOCK
16-PUSHBUTTON
EXPANSION
MODULE
~12
~0
G/T
~12
~0
SV124-0450A
GATEWAY INTERFACE
12
−−−−
sec.5b
2GO! - Technical manual
SV124-0414A
VIDEO DOOR PHONE REFERENCES
Atlantico model
N. X Colours video door phone Ref. 1702/40
or
N. X Black/white video door phone Ref. 1702/1
N. X Kit bracket + one user distributor Ref. 1702/701
or
Utopia model
N. X Colours video door phone Ref. 1703/1
N. X Kit bracket + one user distributor Ref. 1703/701
or
Artico model
N. X Black/white video door phone Ref. 1705/1
N. X Kit bracket + one user distributor Ref. 1703/701
CONCIERGE REFERENCES
N. 1 Colour video module Ref. 1732/41
or
N. 1 Black/white video module Ref. 1732/1
N. 1 Concierge switchboard Ref. 1038/40
N. 1 Bracket Ref. 1732/957
MAIN VIDEO OUTDOOR STATION REFERENCES
TC
Sinthesi model
N. 2 Colour camera unit module Ref. 1745/40
or
N. 2 Black/white camera unit module Ref. 1745/70
N. 2 Call module Ref. 1038/13
N. 2 Adaptation device Ref. 1742/13A
The call module must be installed in fl ush-mounting boxes
with module frames or in cases with hood for wall-mounted
versions. Refer to section “Sinthesi call module” of door
phones and video door phones product technical manual for
respective diagrams and installation methods.
K-Steel model
N. 2 Black/white camera unit module Ref. 1755/30A
N. 2 Call module Ref. 1038/16
The call module must be installed in fl ush-mounting boxes
with module frames or in cases with hood for wall-mounted
versions. Refer to section “K-Steel call module” of door
phones and video door phones product technical manual for
respective diagrams and installation methods.
SECONDARY VIDEO OUTDOOR STATION REFERENCES
TC
Sinthesi model
N. 2 Tv camera unit and door unit with 2 keys Ref. 1082/72
N. X Push button panel Ref. 1145/11-/12-/13-/14
N. X 16-pushbutton expansion module Ref. 1038/17
POWER SUPPLY AND RELAY REFERENCES
N. 2 Gateway Ref. 1082/50
N. 2 Digivoice power supply Ref. 1038/20
N. 2 2GO! power supply Ref. 1082/20
N. 1 Power supply Ref. 789/2
N. 1 Additional power supply unit Ref. 789/3
N. 2 Switching devic Ref. 1038/69
N. X Video distributor Ref. 1795/40
DIAGRAM NOTES
(see ending section)
CD.001
CD.002
CD.005
CD.008
CD.009
V2.001
V2.004
V2.006
V2.007
VD.002
VU.002
VU.003
VX.008
BLOCK DIAGRAM
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 2 VIDEO
DOOR UNITS WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c video door unit
2
2
SECONDARY
2
12 12
MAIN
2
2
MAIN
SECONDARY
2
2
2
99
2
2
10
TC
TCTC
TC
ELECTRICAL
LOCK
ELECTRICAL
LOCK
ELECTRICAL
LOCK
ELECTRICAL
LOCK
CONCIERGE STATION
GATEWAY INTERFACE
sec.5b
−−−−
13
2GO! - Technical manual
CONNECTION OF N 2GO! VIDEO DOOR PHONE COLUMNS TO 2 VIDEO
DOOR UNITS WITH DIGIVOICE CALLING MODULE AND TO 1 DOOR PHONE
SWITCHBOARD WITH VIDEO MODULE
Each column may be connected to a specifi c video door unit
SV124-0414A
(VU.003)
(VD.002)
(VU.002)
(CD.005)
2
2
2
(VX.008)
SLAVE
(CD.008)
(VX.008)
(VX.008)
MAINMAIN
SECONDARY
(V2.004)
2
(VX.008)
DIGIVOICE
POWER SUPPLY
COLUMN "I"
1
0
COLUMN "II"
2
(CD.005)
(VD.002)
(VU.002)
2
M ASTER
(CD.002)
(VX.008)
(V2.006)
(V2.006)
AS
COLUMN 1
D
S1
S2
0V
+V
0F
+F
RPAL
FA2
FB2
S12
CV
SL
SCM
SCT
RPCH
FB1
FA1
0V
B
FB
D
A
R2
R1
FA
LINE
+V
0V
0
230
RL
inR2
R1
V2
R1
R2 out
T
GND
GND
V5
V3
SE-
SE+
PA
GND
SP
TST
LINE
ILL
EXP
D
D
+F
0F
FB2
FA2
S1
S2
+V
0V
0V
S12
SC
SL
P
T2
SE-
SE+
H
SP
0V
T1
PH
0V
+V
FA1
FB1
MS
MP1
MP2
MV
MA
0V
FB
FA
+V
B
FB
D
A
R2
R1
FA
LINE
+V
0V
0
230
M2
0D
DE
M1
+F
0F
0V
DU
0V
+V
S+
S-
CP
LINE
R1
RL
R2 in
V2
230
0
R2 out
TC
TCTC
S+
S-
CP
LINE
R1
R2
B
A
R2
R1
OUT
R2R1 A B
A
B
BAR1 R2
A
B
R1
R2
B
A
R1
R2
IN
I
IVIII
II
0
230
0V
0F
+F
0V
+V
DU
M2
0D
DE
M1
U
V5
T
0V
RES
RE
I1
R2
I2
0V
+V
V5
RF
I5
V5
V5
TC2TC1
~12
~0
R2
T
R1
B
A
+TC
LINE1
LINE2
230
0
LINE0
LINE3
LINE4
LINE
IN/OUT
LINE
DER
cn2
BI
AI
BO
AO
R1
0V
RD
R2
~12
~0
T
R2
R1
+TC
A
B
0F
FB2
S1
D
S2
0V
+V
SL
S12
0V
SC
FA2
+F
D
MV
MA
MS
MP2
MP1
0V
H
T2
SE+
PH
P
SP
SE-
T1
+V
0V
FA1
FB1
+V
0V
FB
FA
U
V5
RES
0V
0V
+V
T
V5
I5
I1
V5
TC2
RF
I2
V5 R2
RE
TC1
SWITCHING
DEVICE
Signal A
SWITCHING
DEVICE
Signal B
ADDITIONAL
POWER SUPPLY
POWER SUPPLY
LINE~
LINE~
DIGIVOICE
POWER SUPPLY
LINE~
LINE~
LINE~
VIDEO
DISTRIBUTOR
GATEWAY
GATEWAY
Postal Lock
Release
Postal Lock
Release
Door Lock
Release
ELECTRICAL
LOCK
Door Lock
Release
ELECTRICAL
LOCK
Door Lock
Release
ELECTRICAL
LOCK
Floor
call button
Floor
call button
2GO!
POWER SUPPLY
ONE USER
DISTRIBUTOR
CONCIERGE SWITCHBOARD
GATEWAY INTERFACE
14
−−−−
sec.5b
2GO! - Technical manual
CD.002 - The master power unit must
be arranged in the middle of the
system.
CD.005 - The calling module must be
programmed with: PRIVATE DOOR OPENER
[Segr.] (see programming chapter).
CD.008 -
The power unit must be
positioned so that the wires to each
calling station are less than 110m
long.
2,5
(1-2)
2250
200
1,5
250
BETWEEN POWER UNIT AND LAST
DECODER OR SPECIAL DOOR PHONE
BETWEEN POWER UNIT AND LAST
SPECIAL DOOR PHONE
0V, +V
Wires
20
0,75
2,5
Sq.mm
0F, +F
m
350
m
0F, +F
2,5
4
40
FA-FB
460
0V, +V
60 330
110
0,75
2,5
4
1,5
70
Distance
m
100
210
0,75
- -
0,75
CD.001 - MINIMUM WIRE
CROSS-SECTION AREAS
760
0,75 2,5
m
0,75
150
3450
550
120
4
2,5 4
400
1100
1,5
0V, +V
m
m
1,5
1200230
1,5
75
1,5
4
- -
Distance
Wires
Sq.mm
Distance
Wires
Sq.mm
Distance
Wires
Sq.mm
Distance
Wires
Sq.mm
Distance
Wires
Sq.mm
Distance
Wires
Sq.mm
4
580 1160 - -1800
D
OD
2,5
700
m
1180
m
(Data)
1,5
1800
1,5
- -
2,50,75
0,75
35O
Distance
Wires
Sq.mm
- -
0,25
CV-0V
- -
- -20
0,5
Lay the wires at a suitable distance
from power lines (further than 30cm
where possible).
- -
50
CA-FA-FB
m
Distance
Wires
Sq.mm
The maximum extension of DIGIVOICE
system is 3500m.
The extension corresponds to the
distance between the calling device
and the most distance decoder.
Include the sum of all sections
(column lines + common lines) for
complex systems with several columns.
Do not include extension lines from
decoders to apartment stations.
BETWEEN POWER UNIT AND CALLING MODULE
BETWEEN POWER UNIT AND DIGITISER
BETWEEN POWER UNIT AND CALLING
MODULE OR DIGITISER
BETWEEN CALLING STATION
AND LAST DECODER
BETWEEN MASTER POWER UNIT
AND LAST DEVICE
BETWEEN MASTER POWER UNIT
AND LAST SLAVE
BETWEEN DECODER AND
APARTMENT STATION
INSTALLATION DIAGRAM
DIAGRAM NOTES
GATEWAY INTERFACE
sec.5b
−−−−
15
2GO! - Technical manual
CD.009 -
Example of connection between two calling modules
when the distance exceeds 110 metres.
FB1
OD
DE
FA1
FB1
FA1
FB2
0D
FA2
FB2
FA2
DE
SE-
SE+
SP
H
0V
T1
PH
P
T2
MA
MS
D
FA
FB
0V
+V
MV
SC
SL
S12
0V
+V
R1
0V
R2
+V
0V
D
FA1
FB1
MP1
MP2
FB2
FA2
0F
+F
SE-
SE+
SP
H
0V
T1
PH
P
T2
MA
MS
D
FA
FB
0V
+V
MV
SC
SL
S12
0V
+V
R1
0V
R2
+V
0V
D
FA1
FB1
MP1
MP2
FB2
FA2
0F
+F
230
0
0F
+F
+V
0V
DU
M1
0D
DE
M2
230
0
0F
+F
+V
0V
DU
M1
0D
DE
M2
2ND STATION
LOCK
ELECTRICAL
Ref.1038/20
1ST MODULE
1ST STATION
LOCK
ELECTRICAL
POWER UNIT
Ref.1038/20
2ND MODULE
POWER UNIT
LINE ~LINE ~
CALLING MODULECALLING MODULE
INSTALLATION DIAGRAM
DIAGRAM NOTES
GATEWAY INTERFACE
16
−−−−
sec.5b
2GO! - Technical manual
V2.006 - To connect the AWG22 wires
(A and B signals) make sure that the
twisting is interrupted as close to
the relay boxes 1038/69 as possible.
(Arrange the devices as shown in the
figure).
VX.006 - See the instruction book
provided with the product for fitting
the accessory in the device.
VX.008 -
Connect the devices to a
filter and power line protection
device.
VU.002 - Follow the instructions
provided with the product for fitting
the camera.
VU.003 - Use the wire (provided) to
connect the switchboard to the video
module. Connect the long terminal to
terminal CV and the short terminal to
GND.
VD.002 -
See the chapter "Demister
power" in the chosen product manual
for K-Steel camera modules only.
V2.004 - Important! The dip switches
on the power unit corresponding to not
connected lines must be switched to
the on position (see instruction
booklet provided with the product).
0,28
0,28
0,28
--
Wires
SP, GND
--
--
--
--
--m7 5
-
mmq
25
--
Distance
--
mmq
--
Distance
0,5
-- --
mmq
100Distance
0,28
mmq
Wires
PA, GND
5030
m
1
• ELECTRICAL LOCK
25Distance
m
• ELECTRICAL LOCK BUTTON
• DEVICE FOR CCTV CAMERAS
• DOOR SENSOR CONTACT
m
--
CAUTIONS
--
m
FROM POWER UNIT TO DOOR UNIT
--75
V2.001 - WIRE CROSS-SECTION AREA
120(max.75m with Sentry+)
Distance
LINE wires
Use Ref. 1082/90 wire only
FROM POWER UNIT TO INDOOR STATION
Distance
LINE wires
Use Ref. 1082/90 wire only
In all cases, avoid laying system
wires near electrical power lines to
improve interference immunity.
Keep a distance of at least 30 cm.
The distance between the calling
device and the most distant indoor
station must be less than 150 m.
The distance between the most distant
indoor stations of various columns
must be less than 150 m.
Extension limits of the system.
The maximum extension of the 2GO!
System is 375 m.
Consider the sum of all lines
(sections on door unit side + sections
on video door phone/door phone side)
in complex systems.
Extension lines from the distributor
to the indoor stations are included.
AUXILIARY SIGNALS FROM DOOR UNIT A:
Wires
SE-, SE+
Wires
T, GND
Distance
Wires
1,5 2,5
0,75
A, B
100
R2, R1
0,75
1,5
200
+TC, R1
0,75
Important! Use AWG22
double telephone wire
only (max. distance 850m).
Wires
50
Wires
V2.007 - CROSS-SECTION AREAS
DIGIVOICE VIDEO SYSTEM
m
mmq
mmq
400
2,5
4,0
1
2
IN OUT
2
1
Ref.1332/85
2
1
Ref.1332/86
UTILITY
IN OUT
2
1
PROTECTION FILTER
NL
EARTH
N
L
NEUTRAL
LIVE
MAINS~
LINE~
INSTALLATION DIAGRAM
DIAGRAM NOTES
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

urmet domus MT124-017 Technical Manual

Brand
urmet domus
Model
MT124-017
Category
Gateways/controllers
Type
Technical Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents