Jabra Enhance Plus
What can I do if the pairing steps are not successful?
If the pairing steps are not successful, try the following troubleshooting
steps. Try re-pairing after you complete each troubleshooting step.
Restart your mobile device by turning it off and on.
Restart your Jabra Enhance Plus by placing the earbuds in the charging
case and then removing them.
Ensure your earbuds are in pairing mode. See the following section,
Related Frequently Asked Questions, for guidance on how to pair your
Jabra Enhance Plus.
On your mobile device, turn Bluetooth off and on.
Remove any previously paired devices from the Hearing Devices menu.
Try to pair your Jabra Enhance Plus using a different mobile device. This
is to confirm that a different mobile device will find and pair with your
Jabra Enhance Plus.
If you still cannot pair your Jabra Enhance Plus with your mobile device,
contact support.
https://www.jabra.com/supportpages/jabra-enhance-plus/300-enhance-plus/faq/75e830f8-
9a65-4c1f-84cb-f05f7958a3a9
Page 1 of 1
