Jabra Elite 85t Operating instructions

Brand: Jabra

Model: Elite 85t

Type: Operating instructions

Jabra Elite 85t: True wireless earbuds engineered for superior sound, exceptional call clarity, and a customizable fit. Experience immersive music and crystal-clear calls with powerful 12mm speakers, advanced noise-canceling technology, and 6 microphones for effective noise isolation. Personalize your audio with the adjustable EQ and MySound feature, tailored to your unique hearing profile. Enjoy up to 7 hours of battery life with ANC on, extendable to 25 hours with the compact charging case. Stay connected with multipoint Bluetooth pairing, allowing simultaneous connection to two devices.

Jabra Elite 85t - Grey

How do I pair my Jabra Elite 85t with my mobile device?

To pair with your smartphone, tablet, or mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn on your earbuds by removing them from the charging case.

Alternatively, simultaneously press the Left and Right buttons.

The LEDs on both earbuds will flash green.

3. To enter pairing mode, simultaneously press and hold (3 seconds) the

Left and Right buttons on the earbuds, until the LED on the right

earbud flashes blue.

The earbuds are now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra Elite 85t from the list. Alternatively, wear the earbuds to hear

the voice guided instructions.

Enter “0000” (four zeros) if you are asked for a pin code.

If you pair with two mobile devices, use this process separately for each

mobile device. After pairing with both mobile devices, you will need to

reselect the Jabra Elite 85t in the Bluetooth settings on the first mobile

device. This will complete the pairing process for both mobile devices.

In daily use, when you turn on the earbuds, they will automatically

reconnect with the last previously paired device, if it is turned on and

within range.

09/05/2022 04:34

https://www.jabra.com/supportpages/jabra-elite-85t/100-99190703-98/faq/d3b720c8-

d5e8-45db-bf58-c24a62e25208

Page 1 of 2

To pair with your smartphone, tablet, or mobile device using only the

right earbud, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn off the right earbud manually by pressing the Right button until

the LED flashes red.

3. To enter pairing mode, press and hold (3 seconds) the Right button

until the LED flashes blue.

The earbud is now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra Elite 85t from the list. Alternatively, wear the earbud to hear the

voice guided instructions.

Enter “0000” (four zeros) if you are asked for a pin code.

If pairing is successful, your earbuds will appear in the list of connected

Bluetooth devices on your mobile device. The Bluetooth connection

will also be announced in the earbuds.

Note

Images are for guidance purposes only. The displayed image may differ

slightly from your device, however the content is still relevant and

accurate.

If pairing is not successful, try the pairing steps again, or try pairing with a

different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed

steps for pairing with a mobile device.

09/05/2022 04:34

https://www.jabra.com/supportpages/jabra-elite-85t/100-99190703-98/faq/d3b720c8-

d5e8-45db-bf58-c24a62e25208

Page 2 of 2

Jabra Elite 85t Operating instructions

Jabra Elite 85t Operating instructions

Jabra Elite 85t Operating instructions

Related papers