2. SKYDANCE
  3. F1-D 3-Key Single Color LED IR Controller
F1-D 3-Key Single Color LED IR Controller

SKYDANCE F1-D 3-Key Single Color LED IR Controller User manual

  • I have analyzed the provided user manual for the F1-D LED Controller. This document provides information on the product's features, technical parameters, wiring diagrams, and troubleshooting. I can help you with any questions you might have about this device, including its 3 key operation for on/off and dimming, supported LED strip length of 5m and the 8192 dimming levels.
  • What is the input voltage?
    What is the maximum output current?
    What is the control distance ?
    How many levels of dimming are supported?
3-Key Single Color LED IR Controller
LVD
ModelNo. :F1-D
EN 62368-1:2020+A11:2020
ETSI EN 300 328 V2.2.2
CE,EMC,LVD,RED
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
73.00mm
35.00 mm
14.00 mm
Diming remoter
1 channel constant voltage/Max 5A output/Step-less dimming/IR remote control
● 1 channel constant voltage single color LED mini controller.
● 3 key operation with on/off and dimming.
● 5A output, connect with 5 meters LED strip.single color
● 8192 levels 0-100% dimming smoothly without any ash.
Features
TechnicalParameters
Safety and EMC
EMC standard (EMC)
Radio Equipment(RED)
Safety standard(LVD)
Certification
Input and Output
Output type Constant voltage
Output current Max. 5A
Output voltage 12-24VDC
Input voltage 12-24VDC
Warranty and Protection
5 years
Protection
Reverse polarity
Over heat
Short circuit
Warranty
Dimming data
Dimming range
IR
10m(Barrier-free space)
8192 (2^13) levels
0 -100%
Input signal
Control distance
Dimming gray scale
2000Hz (default)
PWM Frequency
Dimming curve Logarithmic
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Tc:
+85
O
C
Dimension
Wiring Diagram
User Manual Ver 1.0.0 Page 1
Bright
+
Bright
Bright
+
Bright
+
-
5m single color LED strip
Power Supply
12-24VDC
Constant Voltage
AC100-240V
40.00 m m
86.00 m m
7.00 mm
F1-D 3-Key Single Color LED IR Controller
Bright
+
Bright
100
90
80
70
60
50
40
30
20
10
50 60 70 80 90 10010 20 30 40
Gamma=1.6
PWM duty(%)
Brightness(%)
Malfunctions analysis & troubleshooting
Malfunctions
Causes
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
1. Nopower.
2. Wrongconnectionor insecure.
No light
Troubleshooting
1. Replace battery.
2. Reduce remote distance.
1. Check the power.
2. Check the connection.
Dimming Curve
Page 2
User Manual Ver 1.0.0
Bright
Bright
+
:Turn on or off light.
:Brightness -, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
:Brightness +, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
Key Function of controller
:Increase brightness,
Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
:Decrease brightness,
Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
:Turn on the light.
:Turn off the light.
Key Function of remoter
F1-D 3-Key Single Color LED IR Controller
/