SKYDANCE LV2 User manual

SKYDANCE
Brand
SKYDANCE
Model
LV2
Type
User manual
Technical Parameters
Constant voltage Operation temperature
Case temperature (Max.)
Ta: -30
O
C ~ +55
O
C
Tc: +85
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certication CE,EMC,LVD
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Warranty and Protection
5 years
Protection
Warranty
0.066kg
L120 x W43 x H27mm
Gross weight
Size
Dimming data
Package
2 x (60-180)W
12-36VDC
2CH,5A/CH
12-36VDC
10.5A
Reverse polarity
Model No.: LV2
2 Channel 0/1-10V LED Dimming Driver
0/1-10V CCT dimming/ /PWM Constant voltage output/Linear or logarithmic dimming2 channel
1
User Manual Ver 2.0.0
Output power
Output voltage
Output current
Input and Output
Input voltage
Input current
Output type
Environment
Features
Mechanical Structures and Installations
Output LED +
Output CW LED -
GND
Power input +
Power input -
LED indicator
SET button
Installation rack
Installation rack
12-36VDC
+
-
CWGND
CCT
WW
+
LED OUTPUT
0/1-10V INPUT
SETRUN
CW
DIM
WW
Output WW LED -
0/1-10V input (CCT/CW)
0/1-10V input (DIM/WW)
Wiring Diagram
LVD
● 2 channel 0/1-10V LED dimming driver, 2 channel PWM constant voltage output.
● For dual color control, the two 0/1-10V input can be set as warm white and
cool white respectively, or one for brightness adjust and the other for color temperature adjust.
● 0~100% dimming range, linear(default) or logarithmic dimming curve selectable.
● Compatible with active or passive 0-10V, 1-10V dimmer,
can solve the uorescent lamp dimming system compatible with LED lighting.
114.00 mm
38.00 mm
20.00 mm
LV2
2CH 0/1-10V dimmer
Dual color LED strip
Power Supply
12-36VDC
Constant Voltage
Note:
● The 0/1-10V input is operable via commercially available simple rotary wall switchs designed
for 0/1-10V dimming equipment or from decicated system central dimming controllers.
● Compliant with 0-10V, 1-10V, 10V PWM, RX (4 in 1).
● We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces,
The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
Dimming range
0/1-10V
0 -100%
Input signal
Dimming curve Linear(default)
2KHz
PWM Frequency
IP20
IP rating
Key function
Press the SET button to switch two dimming mode.
● Set DIM+CCT dimming mode:
Press and hold the SET button for 2s, the RUN indicator will flash once.
Set DIM dimming input for brightness adjust, CCT dimming input for color temperature adjust (factory setting).
● Set WW+CW dimming mode:
Press and hold the SET button for 5s, the RUN indicator will flash twice.
Set WW dimming input for WW LED channel brightness adjust, CW dimming input for CW channel brightness adjust.
Note:
● Linear dimming: Press and hold the SET button for 10 s, RUN indicator flashes 3 times (factory settings are restored).
● Logarithmic dimming: Press and hold the SET button for 15 s, RUN indicator flashes 4 times.
Dimming Curve
0/1-10V dimming
100
90
80
70
60
50
40
30
20
10
5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
1.0 2.0 3.0 4.0
Gamma=1.6
PWM duty(%)
0/1-10V CCT
(CW)100
90
80
70
60
50
40
30
20
10
5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
1.0 2.0 3.0 4.0
Gamma=1.6
CCT (%)
(WW) 00
2
User Manual Ver 2.0.0
  • Page 1 1
  • Page 2 2

SKYDANCE LV2 User manual

SKYDANCE
Brand
SKYDANCE
Model
LV2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents