K7
© 2008 AS America Inc.
TRADITIONAL CHAMPION
®
4 ELONGATED
RIGHT HEIGHT™ ONE-PIECE TOILET
VITREOUS CHINA
TRADITIONAL CHAMPION
®
4 ELONGATED
RIGHT HEIGHT™ ONE-PIECE TOILET WITH SEAT
❑ 2034.004
• Vitreous china
• EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelorator™
ush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Includes color-matched and design-matched
slow-close molded wood toilet seat and
cover with polished chrome hinges and
EverClean
®
surface
• Traditional styled polished chrome trip lever
• Two matching styled polished chrome bolt caps
• 100% factory ush tested
• 10 year warranty
Nominal Dimensions:
756 x 451 x 749mm
(29-3/4" x 17-3/4" x 29-1/2")
Fixture and seat only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures-
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specied:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Supply with Stop (by other):
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR
ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK
LOCAL CODES.
When installed, top of seat meets minimum requirement
of 432 to 483mm (17" to 19") from the finished floor.
•
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
756mm
(29-3/4)
203mm
(8)
44mm (1-3/4)
32mm
(1-1/4)
419mm
(16-1/2)
343mm
(13-1/2)
273mm
(10-3/4)
749mm
(29-1/2)
425mm
(16-3/4)
451mm
(17-3/4)
FINISHED WALL
25mm
(1)
470mm
(18-1/2)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
305mm
(12)
C/L OF OUTLET
13mm
(1/2)
273mm
(10-3/4)
114mm
(4-1/2)
SUPPLY
AS
REQ'D
*
FINISHED
FLOOR
178mm
(7)
95mm
(3-3/4)
Revised 2/08