American Standard Champion 4 Elongated Right Height One-Piece Toilet 2034.014 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Champion 4 Elongated Right Height One-Piece Toilet 2034.014 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K8
© 2008 AS America Inc.
CHAMPION
®
4 ELONGATED
RIGHT HEIGHT™ ONE-PIECE TOILET
VITREOUS CHINA
CHAMPION
®
4 ELONGATED RIGHT HEIGHT
ONE-PIECE TOILET
2034.014
Vitreous china
EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
4" non-adjustable, piston action Accelorator
ush valve
16-1/2" rim height for accessible applications
Elongated siphon action jetted bowl
2-3/8" fully-glazed trapway
Chrome trip lever
100% factory ush tested
2 bolt caps
10 year warranty
Nominal Dimensions:
756 x 451 x 749mm
(29-3/4" x 17-3/4" x 29-1/2")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures-
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specied:
Color:
White Bone Silver Linen Black
Trip Lever 738772-XXX0A:
002 Chrome (supplied)
068 Blackened Bronze
099 Polished Brass
295 Satin Nickel
Seat:
Champion
®
Slow Close Elongated #5325.010
EverClean
®
Elongated Seat, with Cover and
Slow Close Snap-Off Hinges #5321.110
Supply with Stop (by other):
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR
ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK
LOCAL CODES.
When installed, top of seat meets minimum requirement
of 432 to 483mm (17" to 19") from the finished floor.
Revised 2/08
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
756mm
(29-3/4)
203mm
(8)
44mm (1-3/4)
32mm
(1-1/4)
419mm
(16-1/2)
343mm
(13-1/2)
273mm
(10-3/4)
749mm
(29-1/2)
425mm
(16-3/4)
451mm
(17-3/4)
FINISHED WALL
25mm
(1)
470mm
(18-1/2)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
305mm
(12)
C/L OF OUTLET
13mm
(1/2)
273mm
(10-3/4)
114mm
(4-1/2)
SUPPLY
AS
REQ'D
*
FINISHED
FLOOR
178mm
(7)
95mm
(3-3/4)
/