American DJ DB-DISPLY User manual

Type
User manual

This manual is also suitable for

American DJ
®
AUDIO
LOS ANGELES, CA. 90058 USA
Thank you for purchasing this
American DJ® product. Please read the
following instructions before installing
or using your new unit.
Operating Instructions:
1. Plug in proper AC adapter.
2. Connect music signal to Left and Right input jacks,
must be pre-amp level.
3. Turn the power switch on.
4. Adjust L and R audio controls to desired response
5. This unit has BAR and DOT display modes.
BAR mode: Set switch to BAR position, LEDs
will glow from -57dB to 0dB
according to signal strength.
DOT mode: Set Mode switch to DOT position,
only two LEDs glow and
chase from left to right according
to audio level variety.
CAUTION
Connect RCA Outputs on
rear of unit to other dB-Displays only!
Do not connect to amplifiers!
For service, contact your American DJ® dealer.
CAUTION!
1. Do not expose this unit under high
temperature or humid area.
2. AC adapters rated with DC 12V, 500mA is
recommended.
3. No user serviceable parts. Please contact
your nearest authorized dealer for service.
User Instructions
Model:
dB-Display™
SPECIFICATIONS:
Power input : DC 12V -15V 500mA
Audio input: 100mV-3Vp-p
Power consumption: <10W
Dimensions: 1 3/4” L x 19” W x 1 3/4” H
Weight: 1.75 lbs / 0.85 Kg.
dB-Display
FRONT
REAR
DC INPUT
IN
OUT
IN
OUT
  • Page 1 1

American DJ DB-DISPLY User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI