©American Audio® - www.AmericanAudio.us -
LOS ANGELES, CA. 90040
Model: Active DBM
SPECIFICATIONS:
Power Consumption: 10W
Power: 12V DC 500mA
Weight: 1.75 lbs. / 0.85
Size: 1 3/4” (L) x 19” (W) x 1 3/4” (H)
19 in. single space rack mount.
Thank you for purchasing this ©American Audio® product. For your convenience this products
ready to be used, there is no assembly required. Please read the following instructions before
installing or using your new unit.
Operating Instructions:
1. Plug in proper AC adapter.
2. Connect music signal to Left and Right input jacks, must be pre-amp level.
3. Turn the power switch on.
4. Adjust L and R audio controls to desired response
5. This unit has BAR and DOT display modes.
BAR mode: Set switch to BAR position, LEDs will glow from -57dB to 0dB according to signal
strength.
DOT mode: Set Mode switch to DOT position, only two LEDs glow and chase from left to right
according to audio level variety.
Sensitivity Adjustment: For low level and high level signals, adjust accordingly.
NOTE: This is not a Line Transformer, do not plug an RCA (unbalanced source) and then use XLR
outs or vice versa.
User Instructions
Active DBM
Customer Support:
American Audio® provides a toll free customer support line, to provide set up help and answer
any question should you encounter problems during your initial set up or operation. You may
also visit us on the web at www.AmericanAudio.us for any comments or suggestions. Service
Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
©American Audio® - www.AmericanAudio.us -
LOS ANGELES, CA. 90040
-
1
-
2
