Hikvision DS-IX2001-A3U/X Installation guide

Brand: Hikvision

Model: DS-IX2001-A3U/X

Category: Software

Type: Installation guide

This manual is also suitable for

DS-IX2003-A3U/X

Intelligent Fusion Server

Installaon Guide

Legal Informaon

Installaon Guide

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version of this Manual at the Hikvision website ( hp://

overseas.hikvision.com/en/ ).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properes of

Hikvision in various jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

: The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH

ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

Intelligent Fusion Server Installaon Guide

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Intelligent Fusion Server Installaon Guide

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable

protecon against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful

interference to radio communicaons. Operaon of this equipment in a residenal area is likely to

cause harmful interference in which case the user will be required to correct the interference at his

own expense.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired

operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with

"CE" and comply therefore with the applicable harmonized European

standards listed under the EMC Direcve 2014/30/EU, the RoHS Direcve

2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collecon points.

For more

informaon see: hp://www.recyclethis.info .

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the

product documentaon for specic baery informaon. The baery is

marked with this symbol, which may include

leering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

baery to

your supplier or to a designated

collecon point. For more informaon see:

hp://www.recyclethis.info .

Intelligent Fusion Server Installaon Guide

iii

Preface

Applicable Models

This manual is applicable to DS-IX2001-A3U/X and DS-IX2003-A3U/X.

Symbol Convenons

The symbols that may be found in this document are dened as follows.

Symbol Descripon

Danger

Indicates a hazardous situaon which, if not avoided, will or could

result in death or serious injury.

Cauon

Indicates a potenally hazardous situaon which, if not avoided, could

result in equipment damage, data loss, performance degradaon, or

unexpected results.

Note

Provides addional informaon to emphasize or supplement

important points of the main text.

Intelligent Fusion Server Installaon Guide

Contents

Chapter 1 Acvaon and Login ................................................................................................... 1

1.1 Network Connecon .............................................................................................................. 1

1.2 Tools Preparaon ................................................................................................................... 1

1.3 PC Requirements .................................................................................................................... 1

1.4 Acvaon ............................................................................................................................... 1

1.4.1 Acvate via SADP Soware ........................................................................................... 1

1.4.2 Acvate via Web Browser ............................................................................................. 2

1.5 Login ...................................................................................................................................... 3

Chapter 2

Conguraon Wizard .................................................................................................. 5

2.1 Modify Device IP .................................................................................................................... 5

2.2 Deploy Micro Video Cloud ..................................................................................................... 5

2.2.1 Format Storage Volume ................................................................................................ 5

2.2.2 Create Micro Video Cloud Cluster ................................................................................. 7

2.2.3 Set Storage Parameter .................................................................................................. 8

2.2.4 Add Storage Node to Domain ....................................................................................... 9

2.2.5 Create

Stac Pool ........................................................................................................ 10

2.2.6 Create Video Pool ....................................................................................................... 11

2.2.7 Create Dynamic Pool ................................................................................................... 12

2.2.8 Add Micro Video Cloud ............................................................................................... 13

2.3 Create Cluster ...................................................................................................................... 15

2.3.1 Add Nodes ................................................................................................................... 15

2.3.2 Create Stand-alone Cluster ......................................................................................... 16

2.3.3 Create Master and Backup Cluster .............................................................................. 19

Appendix A. Install

Operang System ....................................................................................... 21

A.1 Network Interface ................................................................................................................ 21

A.2 BMC Conguraon .............................................................................................................. 21

Intelligent Fusion Server Installaon Guide

A.2.1 Default Informaon .................................................................................................... 21

A.2.2 View BMC IP Address .................................................................................................. 21

A.2.3 Modify BMC IP Address .............................................................................................. 22

A.3 Enable Remote Controller ................................................................................................... 22

A.4 Open Mirror File .................................................................................................................. 23

A.5 Install OS .............................................................................................................................. 23

A.6 Modify Node IP .................................................................................................................... 25

Appendix B. Install and Uninstall LIGHTSYSTEM

Soware ......................................................... 28

B.1 Install LIGHTSYSTEM Soware ............................................................................................. 28

B.2 Uninstall LIGHTSYSTEM Soware ........................................................................................ 28

Appendix C. Install and Uninstall Micro Video Cloud ................................................................. 30

C.1 Install Micro Video Cloud ..................................................................................................... 30

C.2 Uninstall Micro Video Cloud ................................................................................................ 30

Intelligent Fusion Server Installaon Guide

Chapter 1 Acvaon and Login

1.1 Network Connecon

Please refer to Network Interface for network connecon requirements.

1.2 Tools Preparaon

• SADP Soware.

• Xshell.

• Java Environment (JER 1.8 or above version).

1.3 PC Requirements

You can get access to the server with Web browser.

The requirements for your PC are shown as below.

• Operang system: Microso Windows 7, Microso Windows 8.

• CPU: Intel

Penum IV 3.0 GHz or above.

• Memory: 1G or larger.

•

Resoluon: 1024 × 768 or higher.

• Web browser: Internet Explorer 8 to 11.

1.4

Acvaon

The server is available only aer being acvated.

1.4.1

Acvate via SADP Soware

Before You Start

• Obtain and install SADP soware.

• Your PC should be in the same subnet with the device.

Steps

1. Run the SADP soware.

Note

The IP address is set as 192.168.1.64 by default.

The server will search all online devices in the same subnet. Detailed informaon such as device

type, IP address,

acvaon status and device serial number.

Intelligent Fusion Server Installaon Guide

2. Select the desired device, set your password in

Acvate Device and click Acvate.

Figure 1-1 Acvate via SADP Soware

Note

• We highly recommend you create a strong password of your own choosing (using a minimum

of 8 characters, including upper case leers, lower case leers, numbers, and special

characters) in order to increase the security of your product.

• We recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

The Acvaon Status will change to be Acvated aer the device is acvated.

3. Modify network parameters of the device.

1) Select an acvated device, and enter informaon such as IP Address, Subnet Mask and

Gateway in the Modify Network Parameter.

2) Enter your password and click modify.

The prompt

informaon of "Network parameters modied." indicates that those sengs will

take

eects.

1.4.2

Acvate via Web Browser

The device can be acvated via Web browser. The default IP address is 192.168.1.64.

Before You Start

• Make sure your PC connects to the Internet.

• Modify the IP address of your PC to make sure the PC and the server are in the same subnet.

Steps

1. Double click the IE browser and enter the default IP address (192.168.1.64) of the server.

2. Press Enter to enter the

acvaon interface.

Intelligent Fusion Server Installaon Guide

Figure 1-2 Acvaon Interface

Note

The password of root user will be changed when the acvaon password is set. As a result, the

password of root user will be the same as that of admin user.

3. Enter password and conrm.

4. Click OK.

1.5 Login

You can get access to the server with web browser.

Note

You shall acknowledge that the use of the product with Internet access might be under network

security risks. For avoidance of any network aacks and informaon leakage, please strengthen

your own protecon. If the product does not work properly, please contact with your dealer or the

nearest service center.

Steps

1. Open web browser, enter the IP address of the server and then press Enter.

Intelligent Fusion Server Installaon Guide

Figure 1-3 Login Interface

2. Enter User Name (admin) and Password.

3. Click Login.

Figure 1-4 Home Page

Note

• If the server is inaccessible, go to Internet

Opons → Advancement , check Enable TLS1.1

and Enable TLS1.2.

• The specic interface depends on the product.

Aer admin user logs in, the server will jump to the homepage where you can view informaon

such as Alarm Stascs, Camera Stascs, and Capture Stascs.

Intelligent Fusion Server Installaon Guide

Chapter 2 Conguraon Wizard

2.1 Modify Device IP

Skip this part if you have modied IP address via SADP soware.

Refer to Modify Node IP to modify device IP by logging in operang system.

Note

Please restart the device aer modifying the IP address of your device.

2.2 Deploy Micro Video Cloud

Micro video cloud is used to store human face pictures and uploaded videos.

2.2.1 Format Storage Volume

Steps

1. Enter

hps://192.168.0.1:5119 in IE browser, press Enter and click Connue to view....

Note

Here we take the IP address of the device (192.168.0.1) as an example. You should enter your IP

address according to actual condions.

2. When logging in for the rst me, set the same password in Login Password and Conrm

Password, and click Create.

Figure 2-1 Create Account

3. Enter admin as User Name and the password set as Password, and click Login.

Intelligent Fusion Server Installaon Guide

Figure 2-2 Login Interface

Note

Hereaer this interface will be referred as 5119 Interface.

4. Go to Device → Storage Volume , select storage volume, and click Format Storage Volume.

Figure 2-3 Select Storage Volume

5. Keep parameters as default values, and click OK.

Figure 2-4 Format Storage Volume

Figure 2-5 Formang Completed

Intelligent Fusion Server Installaon Guide

Note

• It takes a while to complete

formang, please wait.

• If there are mulple storage volumes need to be formaed, please repeat the same steps as

shown above.

2.2.2 Create Micro Video Cloud Cluster

Note

The nodes that create micro video cloud cluster should be the same with that of creang analysis

cluster. Otherwise, excepon may occur.

Steps

1. Input hps://192.168.0.1:5120 in IE browser and press Enter to enter HikCStor Management

System.

Note

Here we take the IP address of the device (192.168.0.1) as an example. You should enter your IP

address according to actual condions.

2. When logging in for the rst me, set the same password in Login Password and Conrm

Password, and click Create.

Figure 2-6 Create Account

3. Input User Name and Password, and click Login.

Figure 2-7 Login Interface

Intelligent Fusion Server Installaon Guide

Note

Hereinaer this interface will be referred as 5120 Interface.

4. Click Cluster Deployment.

Figure 2-8 Click Cluster Deployment

Note

1 or 2 nodes can create a standalone micro video cloud and 3 to 8 nodes can create a cluster

micro video cloud.

2.2.3 Set Storage Parameter

Steps

Note

The specic parameter values lled in the relevant interfaces below are for reference only. You

need to input relevant parameter values according to actual condion.

1. Go to 5119 Interface.

2. Go to System → Storage

Conguraon .

3. Enter the virtual IP of cluster micro video cloud in CVM IP (for standalone micro video cloud,

input node IP).

4. Enter the value that you have set when

creang micro video cloud. Here we take light-cloud as

an example.

5. Select Memory Accelerate as Accelerate Type if the node memory is 128 GB, and select SSD

Accelerate as Accelerate Type if the node memory is 256 GB.

Intelligent Fusion Server Installaon Guide

Figure 2-9 Set Storage Parameters

Note

You can check node memory by inpung free -g in node operang system

6. Aer seng parameters, click Set CVS Parameters to complete.

2.2.4 Add Storage Node to Domain

Steps

1. Go to 5120 interface.

2. Go to Virtualizing → Domain Management , and click Create.

Figure 2-11 Create Domain

3. Enter Domain Name, and click OK.

4. Check created domain, and click Add CVS.

Figure 2-12 Check Created Domain

5. Check storage node and click OK.

Intelligent Fusion Server Installaon Guide

Figure 2-13 Add CVS

2.2.5 Create

Stac Pool

Stac pool is used to storage human face picture of list library.

Before You Start

Storage Volume has been

formaed.

Note

The specic parameter values lled in the relevant interfaces below are for reference only. You

need to enter relevant parameter values according to actual condion.

Steps

1. Go to Virtualizing → Resource Pool Management .

2. Click Create, and set parameters in the popup dialog box, as shown below.

Parameter Name

Descripon

Domain ID Select the domain that you created.

User Name Select admin.

User Permission Select Read/ Write.

Resource Pool Name Enter stac-pool.

Resource Pool Type Select Picture.

Accelerate Picture Select Accelerate.

Storage Mode Select Dispersed.

Overwrite Mode Select Not.

Resource Pool Capacity Enter 300.

Note

It is recommended to set the value as 300, but you can also set

it according to actual needs.

Intelligent Fusion Server Installaon Guide

Max. Locking up Aempts Enter 10.

Figure 2-14 Create Stac Pool

Note

The stac resource pool ID is required when adding smart storage unit.

2.2.6 Create Video Pool

Video pool is used to storage video les that are manually uploaded.

Steps

1. Go to Virtualizing → Resource Pool Management .

2. Click Create, and set parameters in the popup dialog box, as shown below.

Parameter Name

Descripon

Domain ID Select the domain that you created.

User Name Select admin.

User Permission Select Read/ Write.

Resource Pool Name Enter video-pool.

Resource Pool Type Select Video.

Storage Mode Select Centralized.

Overwrite Mode Select Capacity.

Intelligent Fusion Server Installaon Guide

Resource Pool Capacity Enter 100.

Note

It is recommended to set the value as 100, but you can also set

it according to actual needs.

Max. Locking up Aempts Enter 10.

Figure 2-15 Create Video Pool

Note

The stac resource pool ID is required when adding smart storage unit.

2.2.7 Create Dynamic Pool

Dynamic pool is used to storage the human face pictures that are captured by the camera.

Steps

1. Go to Virtualizing → Resource Pool Management .

2. Click Create, and set parameters in the popup dialog box, as shown below.

Parameter Name

Descripon

Domain ID Select the domain that you created.

User Name Select admin.

User Permission Select Read/ Write.

Intelligent Fusion Server Installaon Guide

Resource Pool Name Enter dynamic-pool.

Resource Pool Type Select Picture.

Accelerate Picture Select Accelerate.

Storage Mode Select Dispersed.

Overwrite Mode Select Capacity.

Resource Pool Capacity Enter remaining capacity.

Note

It is recommended to set the value as the remaining capacity ,

but you can also set it according to actual needs. Click to

view available capacity.

Max. Locking up Aempts Enter 10.

Figure 2-16 Create Dynamic Pool

Note

The stac resource pool ID is required when adding smart storage unit.

2.2.8 Add Micro Video Cloud

Steps

1. Log in Intelligent Fusion Server.

Intelligent Fusion Server Installaon Guide

Page is loading ...

Hikvision DS-IX2001-A3U/X Installation guide

Brand: Hikvision

Model: DS-IX2001-A3U/X

Category: Software

Type: Installation guide

This manual is also suitable for

DS-IX2003-A3U/X

Download PDF

report

Hikvision DS-IX2001-A3U/X Installation guide

This manual is also suitable for

Hikvision DS-IX2001-A3U/X Installation guide

Related papers

Other documents