Carlson Plug-in Wall Light
Safety Warnings
INSTRUCTION MANUAL
• This product is only suitable for connection to a 240V~50Hz supply in accordance with current IEEwiring
regulations.Itisforindooruseonly,andnotsuitableforabathroomlocation.
• ThisttingisaClassII,DoubleInsulatedproduct
anddoesnotrequireanEarth.LiveorNeutralmustnot
beconnectedtoEarth.
• Donotplugintothemainsuntilyourlampisfullyassembled.
• Nevertbulbsofahigherwattagethanthosespeciedonthelabel,asthesemaydamagethetting.
• Thelampmustbeprotectedbya3ampfuseinthemainsplug.
• Ifthemainscablebecomesdamageditmustonlybereplacedbyatechnicallycompetent,qualiedperson.
• Ifyouareinanydoubtaboutyourcompetencepleaseconsultaqualiedelectrician.
• Thisproductcontainsdelicateparts–takecareduringhandlingandmaintenancetoavoidbreakage.
• Ifanymodicationismadeitwillinvalidatethewarrantyandmayrendertheproductunsafe
EndonLighting,LS90SE
Assembly/ User Instructions
Before you start
Pleasereadtheseinstructionscarefullybeforettingandretainforreference.Checkthepackagingandmake
surethatyouhavealltherequiredparts.Followeachassemblystepinordertopreventincorrectassembly.
Ensurethattheproductisfullyassembledasillustratedbeforeuse.
These assembly diagrams are intended as a guide – if in doubt consult a qualied electrician.
Care Information
Allow10minutestocoolbeforereplacing,adjustingorcleaning.
Cleanwithadryclothonly.Donotuseliquidorabrasivecleanersonthisproduct.
79380_79500CarlsonW20190613
ClassIIPlugWiringDiagram
E
L
N
FUSE
Fuse
(3AMP)
Blue
(Neutral)
Brown
(Live)
The Light pack contains:
Lighttting
Fixingpack
Retainingclip.
The following tools may be required:
Selectionofcrossandatheadscrewdrivers.
Electricdrillandassorteddrillbits.
1. Donotattempttopluginorusethisproductuntilithasbeenfullyassembled.Disconnectfrommainsduring
assemblyormaintenance.
2. Decideofthepositionofthislighttting..Usethebackplate(1)asatemplatetomarkthescrewholes.
Makethescrewholesandsecuretothewallwithappropriatescrewxings(2).
3. Removethewrappingfromtheshadeandattachtheshade(3)tothelampbyremovingtheshadering(4)
fromthelampholder.Placetheshadeoverthelampholderandrettheshadering.Tightentosecurethe
shadeinplace.
4. Installthebulb(5).Donotinstallabulbwithagreaterwattageordierentshapethanspeciedonthelabel.
5. Tokeepthecabletidy,thisproductissuppliedwitharetainingclip.Decideonthecableposition.Usingthe
retainingclip(6)asatemplatemarkanddrillthepositionofthexingholes.Becarefulnottodamageany
wiringorpipes.Placethecliparoundthecableandxinplaceusingthesuppliedscrewxings(7).
IMPORTANT: Children can become entangled in loose cable. Ensure excessive loops of cable are
secured against the wall using the ttings supplied. Do not use
this product in children’s bedrooms.
6. Plugin,andoperatethelampholderswitch(8)toturnyourlampon.
If your lamp will not illuminate, please check the bulb, the 3
amp fuse in the plug and ultimately check the relevant fuse in
your Fuse Box. If unsuccessful please consult your Retailer.