5019 312 11069*
1. Loadthemachine,closethedrumdoorsandcheck
thattheyareproperlylocked.
2. Adddetergentandadditivesintothedispenserto
nomorethanthe“MAX”levelmark,asfollows:
• Programmewithpreandmainwash
• Mainwashprogrammewithoutprewash
• Fabricsoftenersandconditioners
• Stainremoveragents
• Anti-scaleagents(ifnecessary)
3. Closethelid.
4. Turntheprogramme selectortothedesired
programmeandtemperature.Thelampnexttothe
“Start(Pause)” buttonflashes.Theindicationlamp
ofthepredefinedspinspeedlightsup.
CONSUMPTION DATA
PREPARATION OF THE WASH CYCLE
“LID OPEN” INDICATION
Beforestartingandafterendofaprogramme,thelamp
lightstoshowthethelidcanbeopened.Aslongasa
washprogrammeisrunning,thelidremainslockedand
mustonnoaccountbeforcedopen.Incaseyouhave
anurgentneedtoopenitduringarunningprogramme,
referto“Cancel(Reset)arunningprogrammebefore
theend”.
Whirlpool is a registered trademark of Whirlpool USA.
PROGRAMME START
Openthetapandpressthe“Start(Pause)” button.
Theindicationlampnexttothe“Start(Pause)” button
lightsup.Theprogrammesequenceindicatorshowsthe
currentprogrammephase,runningfromlefttoright
throughWash,Rinse,Spin/Drain.Whentheprogramme
phraseisfinised,thecorrespondingindicationgoesout.
• Note: Ifthereisapowerinterruptionorifthe
applianceisdisconnectedduringthecycle,the
programmewillrunagainfromthepointwhereit
wasinterrupted.
PROGRAMME END
• Allthelightsoftheprogrammesequenceindicator
areoff,andthe“Dooropen”indicationlightsup.
1. Turntheprogrammeselectortothe“Off/O”
position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopenforsometimetoallowthe
interiorofthemachinetodry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightflashes.
2. Selectthenewprogramme,anyoptionsandanother
spinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwhere
thepreviousprogrammewasinterrupted.Donot
adddetergentforthisprogramme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The“Reset”buttoncancelsaprogrammebeforethe
end.Pressthe“Reset” buttonforatleast3seconds.
Anyexistingwaterisdrainedoutbeforethedoorcanbe
opened.
SELECT THE DESIRED OPTION(S)
START DELAY
The“Startdelay”buttonallowstheusertorunthe
machineathisconvenience,forexampleatnightwhen
electricityischeaper.
• Selectprogramme,spinspeedandoptions.
• Pressthe“Startdelay”buttonseveraltimesto
selectadelaytimeof1,3,6,9or12hours.
Thecorrespondingindicatorlamplightsup.
• Starttheprogramme(see“ProgremmeStart”).
Theindicationnexttothe“Startdelay”buttonlights
upandgoesoffwhentheprogrammestarts.
• Oncehavingpressedthe“Start(Pause)”button,
thecountdownofthetimedelaybegins.Whenthe
programmestarts,thestartdelayindicatorlight
goesoffandisreplacedbytheprogrammesequence
indication.
• Afterthe“Start(Pause)”buttonhasbeenpressed,
thenumberofhourspreselectedcanbereducedby
pressingagainthe“Startdelay”button.
To cancel the “Start delay”
..before you press the “Start(Pause)” button:
• Turntheprogrammeselectortoanotherposition
orpressthe“Reset”button.
..after having pressed the “Start(Pause)” button:
• Pressthe“Reset”buttonforatleast3second.The
startdelayindicatorlightgoesoff.
“Intensive rinse” button
• Theamountofwaterisincreasedtoensureamore
intensiverinse.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandpeoplewithskin
allergies.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Thisoptionisparticularlyrecommendedforthe
“Synthetics”,“Delicates”and“Dailyload”
programmes.
• Itisusefulifyouwanttopostponespinningtoalater
time,orifyouwanttodrainoutonly.
• Ifyouselect“Rinsehold”,donotleaveitemsto
soakfortoolong.
• Assoonastheappliancestopsintherinsehold,the
“Anticrease”lampofthesequenceindicatorlightsup
andthelampnexttothe“Start(Pause)”button
flashes.
Terminate the “Rinse hold” option:
• Pressthe“Start(Pause)”button;theprogramme
willterminateautomaticallywiththefinalspincycle
forthepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,turnthe
programmeselectorknobtothe“Drain”
programmeandpressthe“Start(Pause)”button.
Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet.
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt).Increasesthecycletimeby
approximately20min.
“Eco” button
• Withamodifiedtemperatureprofileandaslightly
prolongedwashingduration,theoptimum
combinationofexcellentwashingresultandeven
lowerenergyconsumptionisachieved.
“Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.Programme
Duration
(hours:minutes)
Cotton/Antibacterial 95 6.0 55* 1.90 2:00
Cotton 60 6.0 48 1.14 2:30
CottonwithEco** 60 6.0 48 0.90 3:30
CottonwithEco** 60 3.0 35 0.78 2:30
Cotton 40 6.0 48 0.70 2:30
Cotton** 40 3.0 35 0.57 2:05
Baby 40 5.0 64 0.70 2:43
Synthetics 60 3.0 54* 0.90 1:40
Synthetics 40 3.0 48 0.55 1:25
Dailyload 40 3.0 40 0.45 1:00
Delicates 40 1.5 50 0.55 0:45
Chrono30’ 30 3.0 35 0.40 0:30
Wool 40 1.0 55 0.55 0:45
Handwash 40 1.0 40 0.55 0:35
SuperEco 60 6.0 55 0.78 4:00
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehomemayvarywith
respecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.Waterandenergyconsumptionrefer
tothedefaultsettingoftheprogrammes;selectingspecialoptionsormodifyingspinspeedortemperaturewillchangetheconsumptiondata.
Theprogrammedurationmaydifferfromthevaluesindicatedaboveasitdependsontheoperationconditionsapplicableatthattime(seealso
“TroubleshootingGuide”inyourInstructionsforUse).
* Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
** ReferenceProgrammesforEnergyLabel.
FAILURE INDICATIONS
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned:inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).