5019 412 10200
Bauknecht is a registered trademark.
CONSUMPTION DATA
“DOOR OPEN” INDICATION
Beforestartingandafterendofaprogramme,thelamp
lightstoshowthethelidcanbeopened.Aslongasa
washprogrammeisrunning,thelidremainslockedand
mustonnoaccountbeforcedopen.Incaseyouhave
anurgentneedtoopenitduringarunningprogramme,
referto“Cancelarunningprogrammebeforetheend”.
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The“Reset”buttoncancelsaprogrammebeforethe
end.Pressthe“Reset” buttonforatleast3seconds.
Anyexistingwaterisdrainedoutbeforethedoorcanbe
opened.
START DELAY
The“Startdelay”buttonallowstheusertorunthe
machineathisconvenience,forexampleatnightwhen
electricityischeaper.
• Selectprogramme,spinspeedandoptions.
• Pressthe“Startdelay”buttonseveraltimestoselect
adelaytimeby1to23hours.
• Starttheprogramme(see“ProgremmeStart”).The
indicationlampoverthe“Startdelay”buttonlights
upandgoesoffwhentheprogrammestarts.
• Oncehavingpressedthe“Start”button,the
countdownofthetimedelaybegins.Thetime
delayindicationonthedisplaydisappearswhenthe
programmestartsandisreplacedbytheremainingtime.
• Afterthe“Start”buttonhasbeenpressed,the
numberofhourspreselectedcanbereducedby
pressingagainthe“Startdelay”button.
To cancel the “Start delay”
..before you press the “Start” button:
• Turntheprogrammeselectortoanotherpositionor
pressthe“Reset”button.
..after having pressed the “Start” button:
• Pressthe“Reset”buttonforatleast3second.The
startdelayindicatorlightgoesoff.
PROGRAMME START
Openthetapandpressthe“Start” button.The
indicationlampnexttothe“Start” buttonlightsup.
Theprogrammesequenceindicatorshowsthecurrent
programmephase,runningfromlefttorightthrough
Wash,Rinse,Spin/Drain.Whentheprogrammephraseis
finised,thecorrespondingindicationgoesout.
• Note: Ifthereisapowerinterruptionorifthe
applianceisdisconnectedduringthecycle,the
programmewillrunagainfromthepointwhereit
wasinterrupted.
Programme
Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without“Rapid”
(kWh)
Approx.ProgrammeDuration (hrs:min)
without“Rapid” with“Rapid”
Cotton/Antibacterial 95 6.0 55* 1.90 2:00 –
Cotton** 60 6.0 48 0.90 3:30 2:30
Cotton** 60 3.0 35 0.75 2:20 ***
Cotton 40 6.0 48 0.70 2:30 2:05
Cotton** 40 3.0 35 0.53 2:00 ***
SuperEco 60 6.0 55 0.78 4:00 ***
Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 45 0.50 1:50 0:59
Delicates 40 1.5 50 0.55 0:45 –
Dailyload 40 3.0 40 0.45 1:00 –
Speed15’ 30 3.0 30 0.15 0:15 –
Wool 40 1.0 55 0.55 0:45 –
Handwash 40 1.0 40 0.55 0:35 –
1. Loadthemachine,closethedrumdoorsandcheck
thattheyareproperlylocked.
2. Adddetergentandeventualadditivesasdescribedon
thefrontpageandinyourInstructionsforuse.
3. Closethelid.
4. Turntheprogramme selectortothedesired
programmeandtemperature.Thetimedisplay
showsthedurationofthechosenprogramme(in
hoursandminutes),andthelampnexttothe
“Start”buttonflashes.Theindicationlampofthe
predefinedspinspeedlightsup.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
“Easy ironing” button
• Canbeusedtogetherwith“Cotton”,“Synthetics”
and“Dailyload”programmestomakeironingeasier.
• Increasesthewaterquantityandtheclothesarespun
verygently.
“Intensive rinse” button
• Morewaterisaddedandrinsecycleisprolonged.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandhelpingpeople
withallergies.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Itisparticularlyusefulifyouwanttopostpone
spinningtoalatertime,orifyouwanttodrainonly.
• Ifyouselect“Rinsehold”,donotleaveitemstosoak
fortoolong.
Note:Theprogrammestopsto“Rinsehold”at
thetimethe“Rinsehold”lightintheprogramme
sequenceindicatorison.Theindicationlampnextto
the“Start”buttonblinks.
Terminate the “Rinse hold” option:
• Pressthe“Start”button;theprogrammewill
terminateautomaticallywiththefinalspincyclefor
thepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,turnandhold
the“Reset”buttonforafewsecondstostartthe
Drainprogramme.
PROGRAMME END
• Allthelightsoftheprogrammesequenceindicator
areoff,andthe“Dooropen”indicationlightsup.
1. 1Turntheprogrammeselectortothe“Off/O”
position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopenforsometimetoallowtheinterior
ofthemachinetodry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start” buttontopausetheprogramme.
Thelightblinks.
2. Selectthenewprogramme,temperature,any
optionsandanotherspinspeedifyouwant.
3. Pressthe“Start” buttonagain.Thenewprogramme
continuesatthesamepositionwheretheprevious
programmewasinterrupted.Donotadddetergent
forthisprogramme.
SELECT ANY DESIRED OPTION
Pushthebutton(s)ofanyoption(s)desired-the
respectiveindicationlightsup.Whenthecombination
ofprogrammeandadditionaloption(s)isnotpossible,
theindicationlightsswitchoffautomatically.Unsuitable
combinationsofoptionsaredeselectedautomatically.
“Prewash” button
• Onlyforheavilysoiledloads(forexample
sand,granulardirt).Increasesthecycletimeby
approximately15min.
• Donotuseliquiddetergentforthemainwashwhen
activatingthePrewashoption.
“Rapid” button
• Enablesquickerwashingbyshorteningthe
programmeduration.
• Recommendableforsmallloadsoronlylightlysoiled
laundry.
“Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.
FAILURE INDICATIONS
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned:inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehomemayvarywith
respecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.Waterandenergyconsumptionrefer
tothedefaultsettingoftheprogrammes;selectingspecialoptionsormodifyingspinspeedortemperaturewillchangetheconsumptiondata.
Theprogrammedurationmaydifferfromthevaluesindicatedaboveasitdependsontheoperationconditionsapplicableatthattime(seealso
“TroubleshootingGuide”inyourInstructionsforUse).
* Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
** ReferenceProgrammesforEnergyLabel.
*** Automaticadaptionofprogrammedurationafterdetectionofwashload.