Astonica 50105252 User manual

Brand: Astonica

Model: 50105252

Type: User manual

Astonica 50105252 is a 36" Rose Vine Table, perfect for outdoor living. It is made of cast materials, making it durable and weather-resistant. Assembly is easy, with all the necessary parts and hardware included. The table is easy to maintain, requiring only occasional cleaning to keep it looking its best. With its stylish design and sturdy construction, the Astonica 50105252 is a great addition to any outdoor space.

OUTDOOR LIVING

Read the instructions and precautions before use of this product

MODEL NO: 50105252

Please keep this instruction manual for future reference

36" Rose Vine Table

Instruction Manual

Made in China

World Factory, Inc.®

Southlake, TX

1-888-422-7800

Limited Warranty

World Factory, Inc.® Products for Home Use

World Factory, Inc.® (Seller) warrants to the original Buyer only, that each Astonica™ Product will be free

from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S

SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL

BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN

MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN

MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR

ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT

OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to

damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering.

To make a claim under this Limited Warranty, you must return the complete product, transportation prepaid,

to any World Factory, Inc.® authorized service center. Call 1-888-422-7800 for the location of the nearest

authorized service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED

TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR

FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,

ARISING FROM THE SALE OR USE OF THIS PRODUCT.

If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such

provision shall not affect any other provision herein, this Limited Warranty shall be construed as if such

invalid and/or unenforceable provision had never been contained herein.

This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior

agreements, arrangements, or understandings between the parties relating to product warranty.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT

1-888-422-7800.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT

1-888-422-7800.

ASSEMBLY INSTRUCTIONS

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-422-7800.

Carefully remove the contents from the package.

If any parts are missing do not attempt to use the product until

they have been obtained and correctly installed.

Caution: Do not over tighten fasteners.

1. (FIGURE 1) Place the table top (A) upside

 down on a flat non-scratch surface.

Insert (6) 8mm x 30 studs (D) into bottom

of table top (A) and tighten until snug.

Position legs (C) over studs (D) and secure

with washers (F) and nuts (G) (leave loose).

PARTS & HARDWARE LIST

PART # DESCRIPTION QUANTITY

A 1Cast Tabletop

B 1Cast Leg Support

C 3Cast Leg

8mm x 30 Threaded Stud

8mm x 25 Phillips Screw

Flat Washer

Hex Nut

2. (FIGURE 2) Position table upright on a flat,

level surface. Align leg support (B) over

the leg tabs and attach with (6) 8mm x 25

Phillips screws (E), washers (F) and nuts

(G) (leave loose).

FIGURE 1

FIGURE 2

3. (FIGURE 3) Tighten tabletop (A) first followed

by leg support (B).

Caution: Do not over tighten fasteners.

FIGURE 3

D DD

Astonica 50105252 User manual

Astonica 50105252 User manual

Astonica 50105252 User manual

Related papers

Other documents