Tuff stuff AP-5ABS Assembly Instructions Manual

Brand: Tuff stuff

Model: AP-5ABS

Type: Assembly Instructions Manual

Tuff Stuff AP-5ABS is a versatile piece of exercise equipment that can help you strengthen your abs and back. It features adjustable pulleys, a comfortable seat pad, and a sturdy frame. With the AP-5ABS, you can perform a variety of exercises, including crunches, sit-ups, and leg raises. The adjustable pulleys allow you to customize the resistance level to suit your fitness level. The comfortable seat pad provides support and stability during your workouts. And the sturdy frame ensures that the AP-5ABS will last for years to come.

ASSEMBLY INSTRUCTIONS

America’s Premium Exercise Equipment

AP-5ABS_AP-5ABD Rev0

Ab/Back Option

Includes Assembly for:

AP-5ABS

Ab/Back W/Nylon Pulleys (Standard)

AP-5ABD

Ab/Back W/Aluminum Pulleys (Deluxe)

Revision Date 06-20-03

About the AP-5ABS_AP-5ABD Ab/Back Option

Congratulations on your new purchase of the AP-5ABS_AP-5ABD

Ab/Back Option. We hope you are completely satisﬁ ed with this

product and wish you many years of enjoyment.

Tuff Stuff Equipment

This Tuffstuff product has been built to precise quality standards

and has been carefully packaged to ensure that damage will

not occur during shipment. The Limited Warranty and signature

indicating ﬁ nal inspection has been conducted by our line foreman,

is an expression of our conﬁ dence in the completeness, the

materials, and workmanship of this product.

Warranty

SEE A COPY OF WARRANTY ON BACK PAGE.

Registration Card

To avoid unnecessary delays in warranty service and to insure that

a permanent record of your purchase is on ﬁ le with our factory, be

sure to complete the warranty registration card and send it to Task

Industries today.

Prior to the Assembly of the AP-5ABS_AP-5ABD

1. We advise you to consult your local Tuff Stuff retailer if you

should have a question or problem regarding the proper

assembly of this unit.

2. Neatly organize and identify all parts according to the Exploded

View Diagram on Fold-out Pg. 3 and the Parts List on Fold-out

Pg. 4.

Tool Requirements

1. One 7/8” combination wrench

2.One 3/4” combination wrench

3. One 9/16” combination wrench

4.One 1/2” combination wrench

5. One ratchet

6. One 9/16” socket

7. One 1/2” socket

8. One rubber mallet

9. One hammer

10. Windex or household glass cleaner

11. Measuring tape

12. Utility knife

SCREWﬁWIDTH

WASHERﬁDIAMETER

NUTﬁDIAMETER

SCREWﬁLENGHT

Hardware Measurement Diagram

Note: Due to continuing product improvements, speciﬁ cations and designs are subject to change

without notice.

Speciﬁ cations

1. Maximum Wt. Capacity 200 Lbs. Fixed

2. Total Machine Weight 80 Lbs.

AP-5ABS_AP-5ABD Ab/Back Option

AP-5ABS_AP-5ABD Ab/Back Option 4

Item No. Description Part No. Qty Item No. Description Part No. Qty

17 INSERT TUBE 1 X 16 UP0053 1 142 PLASTIC INSERT CAP 2" SQ. 10-14 GA. BNH0012 2

23 FOOT ROLL 1 X 5 1/2 X 7 1/4 UP0350 2 144 PLASTIC TUBE GUIDE W/LIP-TEETH 2 1/4" SQ. BNH0059 2

36 ACTUATOR ARM UP0344 1 148 PUSH PULL PIN 1/2 X 3 1/2 BNH0520 1

40 SWIVEL FOAM ROLL TUBE UP2026 1 149 PVC 1 X 7 1/4 BNH1023 2

43 FOAM ROLL 2 X 5 1/2 X 18 UP2031 1 151 ROLL PIN Z/P 3/8 X 1 1/2 BNH0483 1

45 ADJUSTABLE PULLEY BRACKET UP0127 1 166 SHOULDER BOLT ALLOY 3/8 X 3/4 BNH0718 1

75 ABS PIPE 2 X 18 BNH1245 1 170 SOCKET SET SCREW ALLOY 3/8-16 X 1/2 BNH0474 1

78 ALUMINUM PULLEY 3/8" X 4 1/2" BHN0069 5 172 SPLIT HEX TAP BOLT GR-5 B/O 1/2-13 X 3 1/2 BNH1131 1

79 BALL BEARING #W 516 BNH0628 2 174 SPLIT LOCK WASHER B/O 3/8" BNH0658 1

81 BRONZE BUSHING 1 X 1 1/4 X 3/4 X 1 1/2 X 1/8 BNH0527 2 176 SPLIT LOCK WASHER Z/P 1/2" BNH0572 3

83 BUTTON HEAD SOCKET CAP SCREW B/O 3/8-16 X 1 BNH0115 1 179 TURN/PULL PIN W/KNOB AND LOCK BNH0989 1

84 CHROME CAP 2" RD BNH1137 1 180 URETHANE BUMPER 1 3/4 BNH0229 3

89 FINISHED HEX NUT B/O 1/2-13 BNH0201 2 184 DECAL-DANGER TIGHTEN THIS RET..., 3/4 X 1-1/2 BNH0142 1

90 FINISHED HEX JAM NUT B/O 1/2-13 BNH0655 1 191 DECAL-WARNING KEEP HANDS AND FINGERS... BNH0620 1

92 FLAT PHILLIPS MACHINE SCREW 8-24 X 1/4 BNH0408 1 197 HEX KEY 3/16" BNH0371 1

94 FLAT WASHER SAE 3/8" BNH0239 28 198 HEX KEY 7/32" BNH0575 1

99 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 1/4 BNH0273 4 235 MAIN FRAME UP2119 1

100 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 1/2 BNH0303 3 236 SIDE FRAME UP2120 1

101 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 3/4 BNH0274 5 237 PLATE 1/4 X 2 X 6 UP1758 1

102 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 2 BNH0279 2 238 PLATE 1/4 X 2 X 5 UP1759 1

105 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 3 1/4 BNH0312 6 239 PIVOT ARM UP0336 1

122 NYLON FLAT WASHER 1 X 1 1/4 X 1/16 BNH0393 2 240 PULLEY COVER UP0337 1

123 NYLON INSERT JAM LOCK NUT B/O 3/8-16 BNH0365 5 241 CIRCULAR PLATE W/AXLE UP0340 1

125 NYLON INSERT LOCK NUT B/O 3/8-16 BNH0214 6 242 ADJUSTABLE FOOT PIECE UP0338 1

126 NYLON INSERT LOCK NUT B/O 5/16-18 BNH0215 1 243 FOOT ROLL TUBE 1 X 18 1/4 UP0943 1

127 NYLON INSERT JAM LOCK NUT B/O 1/2-13 BNH0366 2 244 SEAT PAD UP2111 1

133 PLASTIC INSERT CAP "A" 1 RD. BNH0812 2 245 MAIN CABLE UP2122 1

134 PLASTIC INSERT CAP "B" 1 RD. BNH0813 2 246 SEAT BELT BRACKET UP2110 2

135 PLASTIC INSERT CAP "C" 2 RD. BNH0814 1 247 HEX HEAD CAP SCREW GR-5 B/O 1/2-13 X 1 BNH0259 2

136 PLASTIC INSERT CAP "D" 2 RD. BNH0815 1 248 PLASTIC INSERT CAP 1 1/4" RD. 11 GA. BNH0573 2

137 PLASTIC INSERT CAP 1" X 2"_ 10-14 GA. BNH0005 3 249 RUBBER GRIP 1 ID X .125 X 7 1/4 BNH0963 2

138 PLASTIC INSERT CAP 1" RD. 10-12 GA. BNH0002 2 250 BLACK SEAT BELT TYPE 1 BUCKLE BNH1217 1

139 CHROME WASHER 3/8 X 1 1/2 BNH1015 1 251 BLACK SEAT BELT TYPE 1 ALR RETRACTOR BNH1218 1

140 PLASTIC INSERT CAP 1 3/4" SQ. 10-14 GA. BNH0053 3

Item No. Description Part No. Qty

78 NYLON PULLEY 4 1/2 RD. WHITE BNH0556 5

AP-5ABD

All parts same as AP-5ABD, except for the part listed below

Parts List

AP-5ABS

Parts List

COLOR CHART

GRAY= SUB-ASSEMBLY PARTS

BLACK= HARDWARE

DO NOT DISCARD THIS MANUAL

TASK INDUSTRIES, INC.

1325 E. Franklin Ave., Pomona, CA 91766

Ph: 909-629-1600 Fax: 909-629-4967

E-mail: [email protected] Net: www.tuffstuff.net

LIMITED WARRANTY

TuffStuff warrants to the original purchaser only that TuffStuff equipment will be free from defects in

material and workmanship. The warranty and remedies set forth herein are conditioned upon proper

storage, installation, use, maintenance and conformance with any recommendations of TuffStuff. This

warranty does not cover products not manufactured by TuffStuff or products which are altered without

the express written consent of TuffStuff. This warranty as specified: a) Frame structure and welds —

Lifetime, b) Moving parts (e.g. pulleys, bearings, bushings) — 5 years; c) Cables upholstery, hand-

grips, finish and any miscellaneous parts not listed — 1 year; from the day of delivery to the original

purchaser. The obligation of TuffStuff under this warranty is limited to repairing or replacing warranted

defective parts, as TuffStuff may elect, at TuffStuff’s facility in Pomona, California, without charge to

purchaser for either parts or labor. Purchaser is responsible for installation of repaired or replaced

parts, and all transportation and insurance costs on returned or replaced equipment to and from

TuffStuff’s facility in Pomona.

THE FORGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE

SOLE LIABILITY OF TUFFSTUFF WITH REGARD TO WARRANTY. NO IMPLIED STATUTORY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL AP-

PLY. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT, WARRANTY, NEG-

LIGENCE OR OTHERWISE, SHALL TUFFSTUFF BE LIABLE FOR SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR

REVENUE, LOSS OF USE OF EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTION

EQUIPMENT, DOWNTIME COST, OR CLAIMS OF CUSTOMERS OR PURCHASER FROM SUCH

DAMAGE.

This warranty is the final, complete and exclusive agreement of the parties with respect to the quality

or performance of the equipment and no action for breach of this written warranty or any implied war-

ranty shall be commenced more than one (1) year after the accrual of the cause of action. No modifi-

cation of this warranty or waiver of its terms shall be binding on either party unless approved in writing

by an authorized representative of the party. Contact TuffStuff at 1325 E. Franklin Avenue, Pomona,

California 91766, before returning any defective equipment.

Note: Retain your sales receipt and be sure to mail in the warranty registration card to insure that a

permanent record of your purchase is on file with the factory and to avoid unnecessary delays in

warranty service.

Tuff stuff AP-5ABS Assembly Instructions Manual

Brand: Tuff stuff

Model: AP-5ABS

Type: Assembly Instructions Manual

Download PDF

report

Tuff stuff AP-5ABS Assembly Instructions Manual

Tuff stuff AP-5ABS Assembly Instructions Manual

Related papers

Other documents