TrailFX FR5U19X, FR6U19X, RLIK71 Installation guide

Hello! I'm a chat assistant, and I've reviewed the installation instructions for the TRAILFX Bedliner Tub RLIK71. This document outlines the necessary steps for proper installation, including a parts list, maintenance advice, and step-by-step instructions. I am ready to answer your questions about this product.
What is the recommended install time?

What should I clean the bedliner with?

How many people are recommended for installation?

Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.

Part Number: RLIK71

Missing Parts –Contact TrailFX at

1(866) 638-4870 or

support@trailfx.com

Any required parts will be shipped to

you directly –DO NOT return whole kit

to store!

Assembly, Installation, Operation and

Maintenance Instructions

Bedliner Tub

Part Number:

RLIK71

Install Time:

30 minutes

APPLICATION: For use with various applications

Parts List:

Description Qty

M6-1 x 20 Hex Flange Bolt 2

DT19TGSW Washer 2

Care and Maintenance: To protect the finish of this product, clean with soap and water, do not use abrasive

substances.

WARNING: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION.

Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.

INSTALLATION PROCEDURE:

PLEASE READ INSTRUCTIONS CAREFULLY

BEFORE STARTING THE INSTALLATION. One

person can perform the installation, but we recommend

two people.

Vehicle Preparation: Thoroughly wash and dry the

tailgate and surrounding areas.

1. Place the bedliner into the truck box.

2. Locate the welded nut at the D-pillar area of the

truck bed and the pre-drilled hole in the bedliner,

then install one bolt and one washer on each side.