TrailFX F8U99X, F55U04X, F65U04X, F65U99X, F8U04X, RLIK27 Installation guide

  • Hello! I've reviewed the installation instructions for the TrailFX Tailgate Cover RLIK27. This document outlines the necessary steps, tools, and parts for a successful installation. The install time is estimated at 30 minutes and requires a Torx T30 screwdriver. I'm ready to answer any questions you might have about the product or its installation.
  • What tool is needed for installation?
    How should I clean the tailgate cover?
    What should I do if I'm missing parts?
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK27 Page-1-2
Part Number: RLIK27
Missing Parts Contact TrailFX at
1(866) 638-4870 or [email protected]
Any required parts will be shipped to you
directly DO NOT return whole kit to
store!
Part Number:
RLIK27
APPLICATION: For use with various applications
Parts List:
Description Qty
Flat Washers 8
Tools Required
Torx Screwdriver (T30)
Care and Maintenance: To protect the finish of this product, clean with soap and water, do not use abrasive
substances.
WARNING: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION.
Assembly, Installation, Operation and
Maintenance Instructions
Tailgate Cover Install Time:
30 minutes
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK27 Page-2-2
INSTALLATION PROCEDURE:
1. PLEASE READ INSTRUCTIONS CAREFULLY
BEFORE STARTING THE INSTALLATION. One
person can perform the installation.
2. Vehicle Preparation: Thoroughly wash and dry the
tailgate and surrounding areas.
3. Using a Torx screwdriver (T30), Remove the 6 or 8
OEM screws that correspond with the pre-drilled holes
in the tailgate cover.
DO NOT DISCARD OEM SCREWS
4. Install tailgate cover using the OEM screws saved
from step 3 and the flat washers provided.
/