2. TrailFX
  3. CC5U15X

TrailFX CC5U15X, CC6U15X, RLIK54 Installation guide

  • Hello! I'm a chat assistant and I have reviewed the installation instructions for the TrailFX Bedliner & Tailgate Cover Kit RLIK54. This document provides a detailed guide on how to install the kit on Chevrolet/GMC vehicles, including tailgate cover and bedliner installation procedures. It also covers required tools, care instructions and options for removable tie-downs. I am ready to answer your questions about this product and installation process.
  • What tools are required for installation?
    What should I do if some parts are missing?
    How should I maintain the product?
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK54 Page-1-3
Part Number: RLIK54
Missing Parts –Contact TrailFX at
1(866) 638-4870 or support@trailfx.com
Any required parts will be shipped to you
directly –DO NOT return whole kit to
store!
Part Number:
RLIK54
Assembly, Installation, Operation and
Maintenance Instructions
Bedliner & Tailgate Cover Kit Install Time:
60 minutes
APPLICATION: For use with various Chevrolet/GMC vehicles
Parts List:
Description Qty
Flat Washers 8
Tools Required
Philips Screwdriver
Torx Driver T15
T15 Torx Bit
2” Hole Saw
Care and Maintenance: To protect the finish of this product, clean with soap and water. Do not use abrasive
substances.
WARNING: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION.
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK54 Page-2-3
INSTALLATION PROCEDURE (OPTIONAL):
For trucks with removable upper tie-downs
BEFORE you install the bedliner into the truck bed.
Locate the dimples for the desired tie-down locations
Drill a 2” round hole
Proceed to bedliner tub installation.
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK54 Page-3-3
INSTALLATION PROCEDURE:
TAILGATE INSTRUCTIONS:
1. Remove the OEM screws with Torx screwdriver
(T15). SAVE OEM SCREWS. 2. Place tailgate cover and align the holes.
Install (1) OEM screw and (1) flat washer in
each location.
BEDLINER INSTRUCTIONS:
1. Insert the bedliner driver side wall under the truck bed rail.
2. Lift the center of the bedliner floor in order to insert the passenger side wall under the bed rail.
/