Corel Designer 2017 User guide

Category
Graphics software
Type
User guide
Copyright © 2017 Corel Corporation. All rights reserved.
Corel DESIGNER® 2017 User Guide
Product specifications, pricing, packaging, technical support and information (“specifications”) refer to the retail English version only. The
specifications for all other versions (including other language versions) may vary.
Information is provided by Corel on an “as is” basis, without any other warranties or conditions, express or implied, including, but not
limited to, warranties of merchantable quality, satisfactory quality, merchantability or fitness for a particular purpose, or those arising by law,
statute, usage of trade, course of dealing or otherwise. The entire risk as to the results of the information provided or its use is assumed
by you. Corel shall have no liability to you or any other person or entity for any indirect, incidental, special, or consequential damages
whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss, even if Corel
has been advised of the possibility of such damages, or they are foreseeable. Corel is also not liable for any claims made by any third party.
Corel's maximum aggregate liability to you shall not exceed the costs paid by you to purchase the materials. Some states/countries do not
allow exclusions or limitations of liability for consequential or incidental damages, so the above limitations may not apply to you.
Corel, the Corel logo, the Corel balloon logo, Corel DESIGNER, CorelDRAW, the CorelDRAW balloon logo, Corel Font Manager, CAPTURE,
CONNECT, LiveSketch, PaintShop, PaintShop Pro, Painter, PerfectShapes, PHOTO-PAINT, PowerClip, PowerTRACE, Presentations, Quattro,
Quattro Pro, VideoStudio and WordPerfect are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries in Canada,
the U.S. and/or other countries. Other product, font and company names and logos may be trademarks or registered trademarks of their
respective companies.
Patents: www.corel.com/patent
218047
Contents | 1
Contents
Getting started.................................................................................................................................................................................... 19
Installing CorelDRAWTechnicalSuite.................................................................................................................................................... 21
System requirements.......................................................................................................................................................................21
Preparing for installation................................................................................................................................................................ 22
Installing CorelDRAWTechnicalSuite applications........................................................................................................................... 22
Installation options......................................................................................................................................................................... 22
Modifying and repairing installations..............................................................................................................................................25
Uninstalling CorelDRAWTechnicalSuite.......................................................................................................................................... 25
Frequently Asked Questions............................................................................................................................................................ 25
Corel accounts and services..................................................................................................................................................................27
Authenticating CorelDRAWTechnicalSuite......................................................................................................................................27
Checking account settings and product details...............................................................................................................................28
Updating Corel products................................................................................................................................................................ 28
Upgrade Program........................................................................................................................................................................... 28
Changing user credentials...............................................................................................................................................................28
Corel Support Services.................................................................................................................................................................... 29
About Corel....................................................................................................................................................................................29
What’s new in Corel DESIGNER 2017?.................................................................................................................................................31
Compatibility.................................................................................................................................................................................. 31
Precision......................................................................................................................................................................................... 32
Productivity.....................................................................................................................................................................................37
Learning resources................................................................................................................................................................................45
Getting help................................................................................................................................................................................... 45
Using the Help and tooltips........................................................................................................................................................... 46
Welcome screen............................................................................................................................................................................. 47
Accessing eBooks............................................................................................................................................................................48
Community website for developers.................................................................................................................................................48
Network deployment guide............................................................................................................................................................ 48
Web-based resources......................................................................................................................................................................48
CorelDESIGNER workspace tour........................................................................................................................................................... 51
2 | Corel DESIGNER 2017 User Guide
CorelDESIGNER terms and concepts.............................................................................................................................................. 51
CorelDESIGNER application window.............................................................................................................................................. 52
Standard toolbar............................................................................................................................................................................ 54
More about toolbars...................................................................................................................................................................... 55
Exploring the toolbox..................................................................................................................................................................... 56
Property bar....................................................................................................................................................................................70
Dockers...........................................................................................................................................................................................71
Status bar.......................................................................................................................................................................................73
Choosing a workspace....................................................................................................................................................................73
Starting and setting up........................................................................................................................................................................ 75
Starting and quitting CorelDESIGNER............................................................................................................................................ 75
Changing the language.................................................................................................................................................................. 75
Changing startup settings...............................................................................................................................................................76
CorelDESIGNER basics..........................................................................................................................................................................77
Understanding vector graphics and bitmaps...................................................................................................................................77
Starting and opening drawings...................................................................................................................................................... 78
Scanning images............................................................................................................................................................................ 81
Working with multiple drawings.................................................................................................................................................... 82
Undoing, redoing, and repeating actions....................................................................................................................................... 83
Zooming, panning, and scrolling....................................................................................................................................................84
Previewing drawings.......................................................................................................................................................................86
Choosing viewing modes................................................................................................................................................................88
Working with views........................................................................................................................................................................89
Saving drawings............................................................................................................................................................................. 90
Working with locked files............................................................................................................................................................... 92
Backing up and recovering files......................................................................................................................................................92
Adding and accessing drawing information....................................................................................................................................93
Closing drawings............................................................................................................................................................................ 94
Finding and managing creative tools and content................................................................................................................................95
Acquiring applications, plug-ins, and extensions.............................................................................................................................95
Finding content with the Get More docker.................................................................................................................................... 97
Contents | 3
Accessing content.........................................................................................................................................................................100
Browsing and searching for content.............................................................................................................................................102
Viewing content........................................................................................................................................................................... 104
Using content...............................................................................................................................................................................105
Installing fonts..............................................................................................................................................................................107
Managing content........................................................................................................................................................................107
Syncing trays with OneDrive......................................................................................................................................................... 109
Content types............................................................................................................................................................................... 111
Working with precision...................................................................................................................................................................... 113
Using gravity snapping................................................................................................................................................................. 113
Using dynamic guides.................................................................................................................................................................. 116
Using alignment guides................................................................................................................................................................122
Using constrain keys.....................................................................................................................................................................126
Using object coordinates.............................................................................................................................................................. 126
Touch and Surface Dial.......................................................................................................................................................................135
Using touch..................................................................................................................................................................................135
Using Microsoft Surface Dial........................................................................................................................................................ 137
Lines, shapes, and outlines................................................................................................................................................................139
Working with lines, outlines, and brushstrokes...................................................................................................................................141
Setting the default property values...............................................................................................................................................141
Drawing lines................................................................................................................................................................................142
Parallel drawing............................................................................................................................................................................ 147
Closing multiple line segments..................................................................................................................................................... 149
Drawing callouts...........................................................................................................................................................................149
Drawing connector lines...............................................................................................................................................................153
Drawing dimension lines.............................................................................................................................................................. 157
Formatting lines and outlines....................................................................................................................................................... 161
Adding arrowheads to lines and curves........................................................................................................................................166
Drawing calligraphic and preset lines........................................................................................................................................... 168
Applying linear-pattern brushstrokes.............................................................................................................................................170
Applying brushstrokes that respond to pen pressure, tilt, and bearing......................................................................................... 171
4 | Corel DESIGNER 2017 User Guide
Sketching naturally with intelligent stroke adjustment.................................................................................................................. 172
Spraying linear patterns along a line............................................................................................................................................ 177
Using pressure-sensitive pens and devices.................................................................................................................................... 179
Support for Real-Time Stylus (RTS) pen tablets and devices...........................................................................................................180
Drawing shapes.................................................................................................................................................................................. 183
Drawing rectangles and squares...................................................................................................................................................183
Drawing ellipses, circles, arcs, and wedges...................................................................................................................................186
Drawing polygons and stars......................................................................................................................................................... 187
Drawing grids...............................................................................................................................................................................189
Drawing predefined shapes.......................................................................................................................................................... 189
Drawing projected shapes............................................................................................................................................................ 190
Drawing by using shape recognition............................................................................................................................................ 192
Shaping objects.................................................................................................................................................................................. 195
Using curve objects...................................................................................................................................................................... 195
Selecting and moving nodes........................................................................................................................................................ 196
Manipulating segments................................................................................................................................................................ 198
Joining curves............................................................................................................................................................................... 199
Copying and cutting segments..................................................................................................................................................... 200
Adding, removing, joining, and aligning nodes............................................................................................................................ 201
Using node types..........................................................................................................................................................................202
Transforming nodes...................................................................................................................................................................... 203
Breaking the path of curve objects...............................................................................................................................................204
Mirroring changes in curve objects...............................................................................................................................................205
Smudging and smearing objects.................................................................................................................................................. 206
Roughening objects...................................................................................................................................................................... 208
Shaping objects by attracting or pushing away nodes..................................................................................................................210
Applying distortion effects............................................................................................................................................................211
Adding twirl effects...................................................................................................................................................................... 213
Shaping objects by using envelopes............................................................................................................................................. 214
Cropping and erasing objects.......................................................................................................................................................216
Splitting objects............................................................................................................................................................................220
Contents | 5
Trimming objects.......................................................................................................................................................................... 222
Filleting, scalloping, and chamfering corners................................................................................................................................ 224
Welding and intersecting objects..................................................................................................................................................226
Creating PowerClip objects........................................................................................................................................................... 227
Setting options for nodes, handles, and previews........................................................................................................................ 232
Projecting objects............................................................................................................................................................................... 235
Understanding projected drawing modes..................................................................................................................................... 235
Using projected drawing modes...................................................................................................................................................236
Customizing drawing profiles....................................................................................................................................................... 238
Objects, symbols, and layers............................................................................................................................................................. 241
Working with objects......................................................................................................................................................................... 243
Selecting objects...........................................................................................................................................................................243
Changing object properties...........................................................................................................................................................246
Copying, duplicating, and deleting objects................................................................................................................................... 246
Copying object properties, transformations, and effects............................................................................................................... 248
Creating new objects from boundaries.........................................................................................................................................250
Cloning objects.............................................................................................................................................................................250
Moving objects.............................................................................................................................................................................251
Sizing and scaling objects............................................................................................................................................................ 253
Rotating objects........................................................................................................................................................................... 255
Mirroring objects.......................................................................................................................................................................... 256
Skewing objects............................................................................................................................................................................256
Aligning and distributing objects..................................................................................................................................................257
Applying object hinting................................................................................................................................................................ 260
Changing the order of objects......................................................................................................................................................260
Grouping objects.......................................................................................................................................................................... 261
Combining objects........................................................................................................................................................................262
Locking objects.............................................................................................................................................................................264
Finding and replacing objects.......................................................................................................................................................264
Hiding and displaying objects.......................................................................................................................................................265
Accessing and displaying geometric information about objects.................................................................................................... 266
6 | Corel DESIGNER 2017 User Guide
Inserting bar codes.......................................................................................................................................................................266
Inserting and editing QR codes.......................................................................................................................................................... 269
Inserting QR codes....................................................................................................................................................................... 269
Editing QR codes..........................................................................................................................................................................270
Validating QR codes..................................................................................................................................................................... 272
Working with symbols........................................................................................................................................................................275
Using symbols in drawings...........................................................................................................................................................275
Managing collections and libraries............................................................................................................................................... 278
Creating, editing, and deleting symbols........................................................................................................................................279
Sharing symbols between drawings..............................................................................................................................................282
Reference: Working with symbols.................................................................................................................................................283
Creating objects for the web..............................................................................................................................................................285
Exporting bitmaps for the web.....................................................................................................................................................285
Saving and applying web presets................................................................................................................................................. 292
Exporting objects with transparent colors and backgrounds......................................................................................................... 292
Creating rollovers..........................................................................................................................................................................293
Adding bookmarks and hyperlinks to documents......................................................................................................................... 294
Adding hotspots and alternate text to objects..............................................................................................................................296
Working with layers............................................................................................................................................................................297
Creating layers..............................................................................................................................................................................297
Changing layer properties.............................................................................................................................................................301
Moving and copying layers and objects........................................................................................................................................303
Object linking and embedding........................................................................................................................................................... 305
Inserting linked or embedded objects...........................................................................................................................................305
Editing linked or embedded objects............................................................................................................................................. 306
Working with object data...................................................................................................................................................................307
Setting up the project database................................................................................................................................................... 307
Managing object data.................................................................................................................................................................. 309
Applying CGM data to objects..................................................................................................................................................... 310
Color and fills.................................................................................................................................................................................... 317
Working with color............................................................................................................................................................................ 319
Contents | 7
Understanding color models.........................................................................................................................................................319
Understanding color depth...........................................................................................................................................................321
Choosing colors............................................................................................................................................................................322
Using the Document palette.........................................................................................................................................................328
Creating and editing custom color palettes.................................................................................................................................. 330
Organizing and displaying color palettes...................................................................................................................................... 333
Displaying or hiding color palettes in the Palette libraries............................................................................................................. 335
Setting the properties of color palettes........................................................................................................................................ 336
Filling objects......................................................................................................................................................................................339
Applying uniform fills................................................................................................................................................................... 339
Applying fountain fills.................................................................................................................................................................. 340
Applying hatch fills.......................................................................................................................................................................343
Applying pattern fills.................................................................................................................................................................... 347
Applying texture fills.....................................................................................................................................................................350
Applying PostScript fills................................................................................................................................................................ 352
Applying mesh fills....................................................................................................................................................................... 352
Applying fills to areas...................................................................................................................................................................354
Working with fills......................................................................................................................................................................... 355
Managing and sharing fills and transparencies...................................................................................................................................357
Managing fills and transparencies................................................................................................................................................ 357
Saving and sharing fills and transparencies.................................................................................................................................. 359
Using color management................................................................................................................................................................... 361
Understanding color management............................................................................................................................................... 361
Getting started with color management in CorelDESIGNER......................................................................................................... 365
Installing, loading, and embedding color profiles......................................................................................................................... 368
Assigning color profiles................................................................................................................................................................ 369
Converting colors to other color profiles...................................................................................................................................... 370
Choosing color-conversion settings............................................................................................................................................... 370
Soft proofing................................................................................................................................................................................371
Working with color management presets..................................................................................................................................... 372
Working with color management policies.....................................................................................................................................373
8 | Corel DESIGNER 2017 User Guide
Managing colors when opening documents.................................................................................................................................374
Managing colors when importing and pasting files......................................................................................................................375
Managing colors for print............................................................................................................................................................ 376
Using a safe CMYK workflow....................................................................................................................................................... 376
Managing colors for online viewing............................................................................................................................................. 376
Special effects....................................................................................................................................................................................377
Adding 3D effects to objects..............................................................................................................................................................379
Contouring objects....................................................................................................................................................................... 379
Applying perspective to objects.................................................................................................................................................... 382
Creating extrusions....................................................................................................................................................................... 383
Creating bevel effects................................................................................................................................................................... 387
Creating drop shadows................................................................................................................................................................ 389
Blending objects........................................................................................................................................................................... 392
Changing the transparency of objects................................................................................................................................................ 397
Applying uniform transparency.....................................................................................................................................................397
Applying fountain transparency.................................................................................................................................................... 398
Applying pattern transparency......................................................................................................................................................400
Applying texture transparency...................................................................................................................................................... 403
Copying, freezing, and removing transparencies...........................................................................................................................403
Applying merge modes................................................................................................................................................................ 404
Using lenses with objects................................................................................................................................................................... 407
Applying lenses.............................................................................................................................................................................407
Editing lenses............................................................................................................................................................................... 409
Text.....................................................................................................................................................................................................411
Adding and manipulating text............................................................................................................................................................413
Importing and pasting text...........................................................................................................................................................413
Adding artistic text....................................................................................................................................................................... 415
Adding paragraph text................................................................................................................................................................. 415
Adding columns to text frames.................................................................................................................................................... 419
Combining and linking paragraph text frames..............................................................................................................................420
Contents | 9
Aligning text by using the baseline grid....................................................................................................................................... 423
Selecting text................................................................................................................................................................................424
Finding, editing, and converting text............................................................................................................................................424
Shifting, rotating, mirroring, and flipping text..............................................................................................................................426
Moving text.................................................................................................................................................................................. 427
Wrapping text.............................................................................................................................................................................. 428
Fitting text to a path....................................................................................................................................................................429
Inserting special characters, symbols, and glyphs..........................................................................................................................431
Embedding graphics..................................................................................................................................................................... 434
Working with legacy text..............................................................................................................................................................434
Formatting text...................................................................................................................................................................................437
Choosing typefaces and fonts.......................................................................................................................................................437
Formatting characters................................................................................................................................................................... 440
Changing text color...................................................................................................................................................................... 441
Kerning a range of characters...................................................................................................................................................... 443
Changing text case....................................................................................................................................................................... 444
Working with OpenType features..................................................................................................................................................445
Adjusting character and word spacing......................................................................................................................................... 449
Adjusting line and paragraph spacing.......................................................................................................................................... 451
Adding bullets to text.................................................................................................................................................................. 452
Inserting drop caps.......................................................................................................................................................................454
Changing character position and angle........................................................................................................................................ 455
Aligning text.................................................................................................................................................................................456
Adding tabs and indents.............................................................................................................................................................. 458
Working with text styles............................................................................................................................................................... 459
Hyphenating text.......................................................................................................................................................................... 459
Inserting formatting codes........................................................................................................................................................... 462
Displaying nonprinting characters.................................................................................................................................................463
Adding equations............................................................................................................................................................................... 465
Working with text in different languages........................................................................................................................................... 467
Formatting Asian text................................................................................................................................................................... 467
10 | Corel DESIGNER 2017 User Guide
Using line-breaking rules for Asian text........................................................................................................................................ 468
OpenType support for Asian text.................................................................................................................................................. 469
Formatting multilingual text......................................................................................................................................................... 469
Displaying text correctly in any language......................................................................................................................................471
Working with translated text........................................................................................................................................................ 471
Managing fonts..................................................................................................................................................................................473
Changing the default font............................................................................................................................................................473
Substituting fonts......................................................................................................................................................................... 474
Embedding fonts.......................................................................................................................................................................... 475
Viewing fonts............................................................................................................................................................................... 475
Filtering fonts............................................................................................................................................................................... 477
Searching for fonts.......................................................................................................................................................................478
Acquiring more fonts................................................................................................................................................................... 479
Identifying fonts........................................................................................................................................................................... 481
Choosing fonts with Font Playground...........................................................................................................................................481
Using Corel Font Manager............................................................................................................................................................483
Using writing tools.............................................................................................................................................................................485
Using QuickCorrect....................................................................................................................................................................... 485
Using the spelling checker and Grammatik...................................................................................................................................487
Using the thesaurus......................................................................................................................................................................489
Working with languages...............................................................................................................................................................490
Customizing the writing tools...................................................................................................................................................... 490
Using checking styles....................................................................................................................................................................491
Using rule classes......................................................................................................................................................................... 494
Analyzing a drawing.....................................................................................................................................................................495
Using word lists............................................................................................................................................................................496
Checking statistics........................................................................................................................................................................ 499
Reference: Using writing tools......................................................................................................................................................499
Templates and styles..........................................................................................................................................................................505
Working with templates..................................................................................................................................................................... 507
Searching for templates................................................................................................................................................................507
Contents | 11
Using templates............................................................................................................................................................................509
Creating templates....................................................................................................................................................................... 509
Editing templates..........................................................................................................................................................................510
Working with styles and style sets......................................................................................................................................................511
Creating styles and style sets........................................................................................................................................................ 512
Applying styles and style sets....................................................................................................................................................... 514
Editing styles and style sets.......................................................................................................................................................... 515
Managing default object properties..............................................................................................................................................516
Exporting and importing style sheets............................................................................................................................................517
Assigning keyboard shortcuts to styles or style sets...................................................................................................................... 518
Finding objects that use a specific style or style set...................................................................................................................... 518
Breaking the link between objects and styles or style sets.............................................................................................................518
Working with color styles................................................................................................................................................................... 521
Creating and applying color styles................................................................................................................................................ 521
Editing color styles....................................................................................................................................................................... 524
Viewing color styles......................................................................................................................................................................528
Exporting and importing color styles............................................................................................................................................ 530
Breaking the link between a color style and an object..................................................................................................................530
Pages and layout............................................................................................................................................................................... 531
Working with pages and layout tools.................................................................................................................................................533
Specifying the page layout........................................................................................................................................................... 533
Choosing a page background.......................................................................................................................................................536
Adding, duplicating, renaming, and deleting pages..................................................................................................................... 537
Inserting page numbers................................................................................................................................................................539
Using the rulers............................................................................................................................................................................541
Calibrating the rulers.................................................................................................................................................................... 542
Setting up the document grid......................................................................................................................................................542
Setting up the baseline grid......................................................................................................................................................... 544
Setting up guidelines....................................................................................................................................................................544
Modifying guidelines.................................................................................................................................................................... 546
Setting the drawing scale............................................................................................................................................................. 547
12 | Corel DESIGNER 2017 User Guide
Working with tables........................................................................................................................................................................... 549
Adding tables to drawings........................................................................................................................................................... 549
Selecting, moving, and navigating table components................................................................................................................... 550
Inserting and deleting table rows and columns............................................................................................................................ 553
Resizing table cells, rows, and columns........................................................................................................................................554
Formatting tables and cells...........................................................................................................................................................555
Working with text in tables.......................................................................................................................................................... 556
Converting tables to text.............................................................................................................................................................. 557
Merging and splitting tables and cells..........................................................................................................................................558
Manipulating tables as objects..................................................................................................................................................... 559
Adding images, graphics, and backgrounds to tables...................................................................................................................559
Importing tables in a drawing......................................................................................................................................................560
Bitmaps.............................................................................................................................................................................................. 563
Working with bitmaps........................................................................................................................................................................565
Converting vector graphics to bitmaps......................................................................................................................................... 565
Importing bitmaps........................................................................................................................................................................567
Cropping bitmaps.........................................................................................................................................................................567
Changing the dimensions and resolution of bitmaps....................................................................................................................567
Straightening bitmaps.................................................................................................................................................................. 569
Correcting perspective distortions................................................................................................................................................. 570
Using Digimarc watermarks to identify bitmaps........................................................................................................................... 571
Removing dust and scratch marks from bitmaps.......................................................................................................................... 573
Applying special effects in bitmaps...............................................................................................................................................573
Working with colors in bitmaps................................................................................................................................................... 575
Using the Image Adjustment Lab................................................................................................................................................. 576
Adjusting color and tone..............................................................................................................................................................581
Using the Tone Curve filter........................................................................................................................................................... 583
Transforming color and tone........................................................................................................................................................ 584
Editing bitmaps with Corel PHOTO-PAINT.....................................................................................................................................584
Working with bitmap color modes.....................................................................................................................................................587
Changing the color mode of bitmaps...........................................................................................................................................587
Contents | 13
Changing bitmaps to black-and-white images..............................................................................................................................588
Changing bitmaps to duotones.................................................................................................................................................... 589
Changing bitmaps to the paletted color mode.............................................................................................................................590
Tracing bitmaps and editing traced results......................................................................................................................................... 593
Tracing bitmaps............................................................................................................................................................................ 593
PowerTRACE controls....................................................................................................................................................................596
Previewing traced results.............................................................................................................................................................. 598
Fine-tuning traced results............................................................................................................................................................. 598
Adjusting colors in traced results..................................................................................................................................................600
Setting default tracing options..................................................................................................................................................... 602
Tips for tracing bitmaps and editing traced results.......................................................................................................................603
Working with RAW camera files.........................................................................................................................................................605
Using RAW camera files............................................................................................................................................................... 605
Bringing RAW camera files into CorelDESIGNER.......................................................................................................................... 606
Adjusting the color and tone of RAW camera files.......................................................................................................................609
Sharpening and reducing noise in RAW camera files....................................................................................................................611
Previewing RAW camera files and obtaining image information................................................................................................... 611
Printing.............................................................................................................................................................................................. 613
Printing basics.................................................................................................................................................................................... 615
Printing your work........................................................................................................................................................................615
Laying out print jobs.................................................................................................................................................................... 616
Previewing print jobs.................................................................................................................................................................... 617
Applying print styles..................................................................................................................................................................... 618
Fine-tuning print jobs................................................................................................................................................................... 619
Printing colors accurately..............................................................................................................................................................620
Printing to a PostScript printer..................................................................................................................................................... 622
Using print merge........................................................................................................................................................................ 624
Viewing preflight summaries........................................................................................................................................................ 627
Preparing files for print service providers............................................................................................................................................ 629
Preparing a print job for a print service provider.......................................................................................................................... 629
Working with imposition layouts.................................................................................................................................................. 630
14 | Corel DESIGNER 2017 User Guide
Printing printers’ marks................................................................................................................................................................ 632
Maintaining OPI links................................................................................................................................................................... 634
Printing color separations............................................................................................................................................................. 635
Working with color trapping and overprinting............................................................................................................................. 636
Specifying In-RIP trapping settings................................................................................................................................................639
Printing to film............................................................................................................................................................................. 641
Working with a print service provider...........................................................................................................................................641
File formats........................................................................................................................................................................................643
Importing and exporting files............................................................................................................................................................. 645
Importing files.............................................................................................................................................................................. 645
Exporting files...............................................................................................................................................................................648
Working with 3D models................................................................................................................................................................... 651
Installing Lattice3D Studio Corel Edition....................................................................................................................................... 651
Importing 3D models................................................................................................................................................................... 652
Inserting and adjusting 3D models...............................................................................................................................................653
Exporting to PDF................................................................................................................................................................................ 655
Exporting documents as PDF files................................................................................................................................................. 655
Including hyperlinks, bookmarks, and thumbnails in PDF files.......................................................................................................658
Reducing the size of PDF files...................................................................................................................................................... 658
Working with text and fonts in PDF files...................................................................................................................................... 659
Specifying an encoding format for PDF files................................................................................................................................. 661
Specifying a viewing option for EPS files...................................................................................................................................... 661
Specifying color management options for exporting PDF files.......................................................................................................662
Setting security options for PDF files............................................................................................................................................ 662
Optimizing PDF files..................................................................................................................................................................... 664
Viewing preflight summaries for PDF files.................................................................................................................................... 665
Preparing PDF files for a print provider.........................................................................................................................................665
Working with office productivity applications..................................................................................................................................... 667
Importing files from office productivity applications..................................................................................................................... 667
Exporting files to office productivity applications..........................................................................................................................667
Adding objects to documents...................................................................................................................................................... 667
Contents | 15
Exporting to HTML............................................................................................................................................................................. 669
Setting preferences for exporting images to HTML....................................................................................................................... 669
Creating web-compatible text.......................................................................................................................................................670
Previewing and verifying files before exporting to HTML...............................................................................................................670
Exporting to HTML....................................................................................................................................................................... 671
Supported file formats........................................................................................................................................................................673
3D file formats............................................................................................................................................................................. 674
Adobe Illustrator (AI).................................................................................................................................................................... 674
Adobe Type 1 Font (PFB).............................................................................................................................................................. 677
Windows Bitmap (BMP)................................................................................................................................................................677
OS/2 Bitmap (BMP).......................................................................................................................................................................678
Computer Graphics Metafile (CGM)..............................................................................................................................................678
CorelDRAW (CDR)......................................................................................................................................................................... 680
Corel Presentation Exchange (CMX).............................................................................................................................................. 681
Corel PHOTO-PAINT (CPT)............................................................................................................................................................. 681
Corel Symbol Library (CSL)............................................................................................................................................................682
Cursor Resource (CUR)..................................................................................................................................................................682
Microsoft Word (DOC, DOCX, or RTF).......................................................................................................................................... 682
Microsoft Publisher (PUB)............................................................................................................................................................. 684
CorelDESIGNER (DES, DSF, DS4, or DRW).................................................................................................................................... 684
AutoCAD Drawing Database (DWG) and AutoCAD Drawing Interchange Format (DXF).................................................................685
Encapsulated PostScript (EPS)....................................................................................................................................................... 687
PostScript (PS or PRN)...................................................................................................................................................................691
GIF................................................................................................................................................................................................692
HTML............................................................................................................................................................................................693
JPEG (JPG).................................................................................................................................................................................... 693
JPEG 2000 (JP2)........................................................................................................................................................................... 694
Kodak Photo CD Image (PCD).......................................................................................................................................................695
PICT (PCT)..................................................................................................................................................................................... 696
PaintBrush (PCX)........................................................................................................................................................................... 697
Adobe Portable Document Format (PDF)...................................................................................................................................... 698
16 | Corel DESIGNER 2017 User Guide
HPGL Plotter File (PLT).................................................................................................................................................................. 700
Portable Network Graphics (PNG)................................................................................................................................................. 701
Adobe Photoshop (PSD)............................................................................................................................................................... 702
Corel Painter (RIF)......................................................................................................................................................................... 703
Scalable Vector Graphics (SVG).....................................................................................................................................................703
Adobe Flash (SWF)....................................................................................................................................................................... 707
TARGA (TGA)................................................................................................................................................................................ 708
TIFF...............................................................................................................................................................................................709
TrueType Font (TTF).......................................................................................................................................................................709
Visio (VSD)....................................................................................................................................................................................710
WordPerfect Document (WPD)......................................................................................................................................................710
WordPerfect Graphic (WPG)..........................................................................................................................................................711
RAW camera file formats..............................................................................................................................................................711
Wavelet Compressed Bitmap (WI).................................................................................................................................................712
Windows Metafile Format (WMF).................................................................................................................................................712
XML Localization Interchange (XLIFF)............................................................................................................................................712
Additional file formats..................................................................................................................................................................712
Recommended formats for importing graphics.............................................................................................................................713
Recommended formats for exporting graphics............................................................................................................................. 714
General notes on importing text files........................................................................................................................................... 714
Customizing and automating............................................................................................................................................................ 717
Setting basic preferences.................................................................................................................................................................... 719
Disabling warning messages.........................................................................................................................................................719
Viewing system information......................................................................................................................................................... 719
Customizing CorelDESIGNER..............................................................................................................................................................721
Saving and restoring defaults....................................................................................................................................................... 721
Creating workspaces.....................................................................................................................................................................722
Importing and exporting workspaces............................................................................................................................................722
Customizing workspace appearance............................................................................................................................................. 723
Customizing keyboard shortcuts................................................................................................................................................... 725
Customizing menus...................................................................................................................................................................... 727
Contents | 17
Customizing toolbars....................................................................................................................................................................728
Customizing the toolbox.............................................................................................................................................................. 731
Customizing the property bar.......................................................................................................................................................731
Customizing the status bar...........................................................................................................................................................733
Customizing filters........................................................................................................................................................................ 734
Customizing file associations........................................................................................................................................................ 734
Using macros to automate tasks........................................................................................................................................................ 737
Working with macros................................................................................................................................................................... 737
Reference........................................................................................................................................................................................... 745
Comparing features............................................................................................................................................................................ 747
Glossary.............................................................................................................................................................................................. 751
18 | Corel DESIGNER 2017 User Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570
  • Page 571 571
  • Page 572 572
  • Page 573 573
  • Page 574 574
  • Page 575 575
  • Page 576 576
  • Page 577 577
  • Page 578 578
  • Page 579 579
  • Page 580 580
  • Page 581 581
  • Page 582 582
  • Page 583 583
  • Page 584 584
  • Page 585 585
  • Page 586 586
  • Page 587 587
  • Page 588 588
  • Page 589 589
  • Page 590 590
  • Page 591 591
  • Page 592 592
  • Page 593 593
  • Page 594 594
  • Page 595 595
  • Page 596 596
  • Page 597 597
  • Page 598 598
  • Page 599 599
  • Page 600 600
  • Page 601 601
  • Page 602 602
  • Page 603 603
  • Page 604 604
  • Page 605 605
  • Page 606 606
  • Page 607 607
  • Page 608 608
  • Page 609 609
  • Page 610 610
  • Page 611 611
  • Page 612 612
  • Page 613 613
  • Page 614 614
  • Page 615 615
  • Page 616 616
  • Page 617 617
  • Page 618 618
  • Page 619 619
  • Page 620 620
  • Page 621 621
  • Page 622 622
  • Page 623 623
  • Page 624 624
  • Page 625 625
  • Page 626 626
  • Page 627 627
  • Page 628 628
  • Page 629 629
  • Page 630 630
  • Page 631 631
  • Page 632 632
  • Page 633 633
  • Page 634 634
  • Page 635 635
  • Page 636 636
  • Page 637 637
  • Page 638 638
  • Page 639 639
  • Page 640 640
  • Page 641 641
  • Page 642 642
  • Page 643 643
  • Page 644 644
  • Page 645 645
  • Page 646 646
  • Page 647 647
  • Page 648 648
  • Page 649 649
  • Page 650 650
  • Page 651 651
  • Page 652 652
  • Page 653 653
  • Page 654 654
  • Page 655 655
  • Page 656 656
  • Page 657 657
  • Page 658 658
  • Page 659 659
  • Page 660 660
  • Page 661 661
  • Page 662 662
  • Page 663 663
  • Page 664 664
  • Page 665 665
  • Page 666 666
  • Page 667 667
  • Page 668 668
  • Page 669 669
  • Page 670 670
  • Page 671 671
  • Page 672 672
  • Page 673 673
  • Page 674 674
  • Page 675 675
  • Page 676 676
  • Page 677 677
  • Page 678 678
  • Page 679 679
  • Page 680 680
  • Page 681 681
  • Page 682 682
  • Page 683 683
  • Page 684 684
  • Page 685 685
  • Page 686 686
  • Page 687 687
  • Page 688 688
  • Page 689 689
  • Page 690 690
  • Page 691 691
  • Page 692 692
  • Page 693 693
  • Page 694 694
  • Page 695 695
  • Page 696 696
  • Page 697 697
  • Page 698 698
  • Page 699 699
  • Page 700 700
  • Page 701 701
  • Page 702 702
  • Page 703 703
  • Page 704 704
  • Page 705 705
  • Page 706 706
  • Page 707 707
  • Page 708 708
  • Page 709 709
  • Page 710 710
  • Page 711 711
  • Page 712 712
  • Page 713 713
  • Page 714 714
  • Page 715 715
  • Page 716 716
  • Page 717 717
  • Page 718 718
  • Page 719 719
  • Page 720 720
  • Page 721 721
  • Page 722 722
  • Page 723 723
  • Page 724 724
  • Page 725 725
  • Page 726 726
  • Page 727 727
  • Page 728 728
  • Page 729 729
  • Page 730 730
  • Page 731 731
  • Page 732 732
  • Page 733 733
  • Page 734 734
  • Page 735 735
  • Page 736 736
  • Page 737 737
  • Page 738 738
  • Page 739 739
  • Page 740 740
  • Page 741 741
  • Page 742 742
  • Page 743 743
  • Page 744 744
  • Page 745 745
  • Page 746 746
  • Page 747 747
  • Page 748 748
  • Page 749 749
  • Page 750 750
  • Page 751 751
  • Page 752 752
  • Page 753 753
  • Page 754 754
  • Page 755 755
  • Page 756 756
  • Page 757 757
  • Page 758 758
  • Page 759 759
  • Page 760 760
  • Page 761 761
  • Page 762 762
  • Page 763 763
  • Page 764 764
  • Page 765 765
  • Page 766 766
  • Page 767 767
  • Page 768 768
  • Page 769 769
  • Page 770 770

Corel Designer 2017 User guide

Category
Graphics software
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI