LG M2343A-BZ User manual

A1

Safety Precautions

Please read these safety precautions carefully before using the product.

Precautions in installing the Product

If you ignore the caution message, you may be slightly injured or the product may be damaged

If you ignore the warning message, you may be seriously injured or there is a possibility of

accident or death.

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the

nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not put heavy objects on the product or sit upon it.

- If the product collapses or is dropped, you may be injured. Children must pay particular attention.

Do not leave the power or signal cable unattended on the pathway.

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

Install the product in a neat and dry place.

- Dust or moisture can cause electrical shock, fire or product damage.

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the

service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur.

If you dropped the product or the case is broken, turn off the product and unplug the power cord.

- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service

center.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable

objects such as paper and matches. Children must pay particular attention.

- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and

contact the service center.

Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more

than 10cm from the wall)

- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.

Do not block the ventilation hole of the product by a tablecloth or curtain.

- The product can be deformed or fire can break out due to overheating inside the product.

Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken.

Install the product where no EMI occurs.

Keep the product away from direct sunlight.

- The product can be damaged.

Warning

Caution

A2A2

Electrical Power Related Precautions

Make sure to connect the power cable to the grounded current.

- You may be electrocuted or injured.

Use the rated voltage only.

- The product can be damaged, or you may be electrocuted.

During a thunder or lightning storm, unplug the power cable or signal cable.

- You may be electrocuted or a fire can break out.

Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a

power bar with a grounding terminal designed for exclusive use with the computer.

- A fire can break out due to overheating.

Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry

the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture.

If you don’t intend to use the product for a long time, unplug the power cable from the product.

- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

Fix the power cable completely.

- If the power cable is not fixed completely, a fire can break out.

Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put

heavy objects on the power cord.

- The power line can be damaged, which may cause electric shock or fire.

Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is

connected to the input terminal on the wall. Additionally, do not touch the power cable right after

plugging into the wall input terminal.

- You may be electrocuted.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily

accessible after installation.

Do not unplug the power cord while the product is in use.

- Electrical shock can damage the product.

Warning

Caution

Precautions in Moving the Product

Warning

Make sure to turn off the product.

- You may be electrocuted or the product can be damaged.

Make sure to remove all cables before moving the product.

- You may be electrocuted or the product can be damaged.

Safety Precautions

A3

Safety Precautions

Caution

Precautions in Using the Product

Warning

Do not put or store inflammable substances near the product.

- There is a danger of explosion or fire due careless handling of the inflammable substances.

When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent

scratching. Do not clean with a wet cloth.

- The water can sink into the product, which can cause electric shock or serious malfunction.

Take a rest from time to time to protect your vision.

Keep the product clean at all times.

Take a comfortable and natural position when working with a product to relax the muscles.

Take a regular break when working with a product for a long time.

Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a

scratch on it.

Keep proper distance from the product.

- Your vision may be impaired if you look at the product too closely.

Set the appropriate resolution and clock by referring to the User’s Guide.

- Your vision can be impaired.

Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)

- Product can be deformed.

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

Caution

Do not shock the product when moving it.

- You may be electrocuted or the product can be damaged

Do not dispose the product-packing box. Use it when you move.

Make the panel face forward and hold it with both hands to move.

- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for

repair.

Do not disassemble, repair or modify the product at your own discretion.

- Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair.

Do not spray water on the product or scrub with an inflammable substance (thinner or benzene).

Fire or electric shock accident can occur

Keep the product away from water.

- Fire or electric shock accident can occur.

On Disposal

A4

Name and Function of the Parts

Name of the Remote Control Buttons

I/II

TV/AV

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

SWAP

PR

VOLVOL

PR

OK

M

X

*

/SSM

MUTE

Use the this button so that no sound comes out temporarily.

POWER

Able to power On/Off.

SOURCE

TV/AV :

TV/AV button.

I/II : Bilingual choice and sound mode selection

Press this button.

[TV]

To switch from Stereo to Mono sound in case of stereo

transmission, or from Nicam Stereo to Nicam Mono, in case of

digital transmission.

to switch from Nicam Dual I to Nicam Dual II or Nicam Dual

I+II in case of Nicam Dual transmission.

to choose between Dual I, Dual II or Dual I+II in case of

bilingual transmission :

Dual I sends the primary broadcast language to the

loudspeakers ;

Dual II sends the secondary broadcast language to the

loudspeakers ;

Dual I+II sends a separate language to each loudspeakers.

[AV]

In AV mode, you can select output sound for the left and right

loudspeakers.

Repeatedly press the I/II button to select the sound output.

L+L : Audio signal from audio L input is sent to

left and right loud-speakers.

L+R : Audio signal from audio L input is sent

to left loud-speaker and audio signal from

audio R input is sent to right loud-speaker.

R+R : Audio signal from audio R input is sent

to left and right loud- speakers.

TV AV1 AV2 S-Video

NOTE : In case of weak stereo sound signals, with stereo or

Nicam stereo transmission, select mono reception.

If you press the button once,

the following Input Signal

Window will appear. Select the

signal type you want using the

button.

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

A5

PR ( ) Buttons

Able to change channel.

VOL ( ) Buttons

Able to adjust sound.

OK Button

Use when functional adjustment is completed.

AUTO Button

•

This function is to automatically search the available

channels. It is available to the TV signal inputs only.

•

This function is to automatically adjust your display

image to the ideal settings for the current screen

resolution size (display mode). It is available to the

PC analog signal input only.

SWAP function Button

To switch the main-screen and sub-screen in

PIP/POP/PBP mode.

Number buttons

Able to directly select and change channel.

I/II

TV/AV

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

SWAP

PR

VOLVOL

PR

OK

M

X

*

/SSM

MENU

Use this button to enter the On Screen Display menu.

EXIT

Use this button to exit the On Screen Display menu.

*/SSM

(Sound Status Memory)

Use this button to select the sound tone.

Press repeatedly to select Flat, Music, Movie,

Speech, User

sound tone.

Name of the Remote Control Buttons

Name and Function of the Parts

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.

• You can use a remote control 7 meter distance and 30 degree

(left/right) within the receiving unit scope.

• Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

A6

Name and Function of the Parts

SLEEP : SLEEP Timer

You can set a time period after which the

TV / AV1 / AV2 / S-Video should switch itself to

standby. Press the key repeatedly to select the number

of minutes.

LIST : Programme list

To display the programme list (0~ 99).

Q.VIEW : QUICK VIEW Button

* Favourite Program On : Rotate Favourite channel.

* Favourite Program Off : To display the previously

selected TV channel.

APC / PSM

Button

Press repeatedly to select Dynamic, Standard, Mild,

Game or User picture mode. This function is not supported

in PC mode.

Note: TV channels displayed in blue have been

setup to be skipped in the Programme Edit

menu

PROGRAMME LIST

0 _ _ _ _ _

4 _ _ _ _ _

8 _ _ _ _ _

12_ _ _ _ _

16_ _ _ _ _

1 _ _ _ _ _

5 _ _ _ _ _

9_ _ _ _ _

13_ _ _ _ _

17_ _ _ _ _

2 _ _ _ _ _

6 _ _ _ _ _

10_ _ _ _ _

14_ _ _ _ _

18_ _ _ _ _

3 _ _ _ _ _

7 _ _ _ _ _

11_ _ _ _ _

15_ _ _ _ _

19_ _ _ _ _

I/II

TV/AV

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

HOLD

INDEX

REVEAL

SWAP

PR

VOLVOL

PR

OK

M

X

?

i

*

APC/PSM

10

20 30

60

240 180

120

90

OFF

Name of the Remote Control Buttons

A7

When 'Input Signal 1' comes on in the main

screen, only 'Input Signal 2' can be displayed on

the sub-screen. On the contrary, if the main

screen displays 'Input Signal 2', the sub-screen

can display 'Input Signal 1' only. You can swap

'Input Signal 1' and 'Input Signal 2' using the

SWAP button.

DVI

RGB

TV

AV1

AV2

S-Video

2.

PIP (Picture in Picture)

Button

The sub-screen is changed in the order shown below.

: SMALL -> MEDIUM -> LARGE -> OFF

3. POP (Picture out Picture) Button

The sub-screen moves to the next mode whenever you press

this button.

: POP ON -> PBP(FULL) -> PBP(4:3) -> OFF

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

HOLD

INDEX

REVEAL

SWAP

PR

M

X

?

i

APC/PSM

Remote Control - PIP/POP/PBP function

SWAP

1. Swap Button

You can swap the main screen and the sub-screen when the

PIP/POP/PBP function is used.

POP ON

PBP (FULL) PBP (4:3)

PIP

POP

PBP

Name and Function of the Parts

A8

Name and Function of the Parts

Remote Control - Using the Teletext function

Please select your local teletext language. (page A29)

If you don't, the teletext may not appear correctly on the screen.

MODE

The mode will be switched in the Teletext

mode.

TIME

When viewing a TV programme, press this

button to display the time at the top right

hand corner of the screen.

press this button to select a sub page number.

The sub page number is displayed at the

bottom of the screen. To hold or change the

sub page, press the RED/GREEN, or

NUMBER buttons. Press again to exit this

function.

MIX

Display the teletext pages superimposed on

the TV picture. To switch the TV picture off

press this button again.

REVEAL

Press the button to reveal/conceal the hidden

information, such as solutions to riddles and

puzzles. Press this button again to remove the

information from the display.

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

HOLD

INDEX

REVEAL

SWAP

M

X

?

i

APC/PSM

A9

Name and Function of the Parts

Remote Control - Using the Teletext function

TEXT

To select the teletext on or off. The main index

page or the last selected page appears on the

screen together with an information headline and

an option line at the bottom of the screen.

UPDATE

Press the button to appear the TV programme.

At the top of screen indicates that you are still in

the teletext mode. Before interrupting teletext, you

may select a page number. When the page has

been found, the information line appears briefly on

your screen. Press the button again to reappear

teletext.

SIZE

Press the button repeatedly to display the upper

part, the lower part and then to return to the

normal page size.

HOLD

Press the button to stop the automatically rotating

of the sub-pages. Press the button again to

continue the automatic rotating again.

INDEX

To display the main index.

AUTO

TEXT SLEEP MODE

UPDATE LIST

TIME

SIZE

Q.VIEW

MIX

HOLD

INDEX

REVEAL

SWAP

PR

VOLVOL

PR

OK

M

X

?

i

*

APC/PSM

A10

Name and Function of the Parts

Rear View

Power Connector : Connect the DC Adapter

D-Sub Analogue Signal Connector

DVI Signal Connector

PC Sound Jack

: Connect the audio cable to the *LINE OUT jack of the PC sound card.

SCART Input/Output Terminal : Connect the SCART cable.

TV Tuner Jack : Connect the antenna cable.

S-Video Input Terminal.

Video(CVBS) Input Terminal.

Audio(CVBS) Input Terminal.

RS-232C Serial Ports

*LINE OUT

A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that

the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of

PC sound card has only Speaker Out, reduce the PC volume.

If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out

using the card jumper of the program (Refer to the Sound Card Manual).

DC 24 V

To connect the input signal cable, audio cable, and others, pull out and eliminate the

back cap using the handle.

A11

DC

2

4 V

A11

First of all, see if the computer, product and the peripherals are turned off.

Then, connect the signal input cable and audio cable.

When connecting with the DVI-D signal input cable.

When connecting with the D-Sub signal input cable.

PC

MAC

Macintosh Adapter (not included)

Use the standard Macintosh adapter since an incompatible

adapter is available in the market. (Different signaling system)

* When connecting to a wall outlet.

Connecting to External Devices

Connect the power cord.

B

A

B

A

D

C

2

4

V

Audio cable

When Connecting to your PC

A12

Select an input signal.

Press the SOURCE button on the remote control to select the input signal.

Or, press the SOURCE button at the front side of the product.

Connecting to External Devices

When connecting with a DVI-D signal input cable.

• Select DVI : DVI-D digital signal.

When connecting with a D-Sub signal cable.

• Select RGB : D-Sub analogue signal.

Note

Turn on power by touching the Power On/Off sensor on the product.

Turn on the PC.

B

A

Power On/Off sensor

SOURCE

SET/AUTO

SOURCE

OK

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

How to connect to two computers.

Connect the signal cables (DVI and D-Sub) to each computer.

Press the SOURCE button in a remote control to select the computer to use.

Directly connect to a grounded power outlet on the wall or a power bar with a ground

wire.

I/II

TV/AV

PR

VOLVOL

OK

*

/SSM

A13

D

C

24

V

G

AUDIO

L

DR

Connect the video cable as shown in the below figure and then connect the

power cord (See page A11).

When connecting with a SCART cable.

Product

VCR/DVD

When watching VCR/DVD

SCART Cable

(not included)

* Please, use shielded

scart cable

A

Connecting to External Devices

A14

Connecting to External Devices

When connecting with an

SCART cable.

•

Select AV1

When connecting with an S-Video cable/

RCA cable

.

•

Select S-Video

When connecting with a RCA cable.

•

Select AV2

B

C

A

When connecting with a RCA cable.

C

AUDIO

OUT

VIDEO

OUT

ANT IN

S-Video

Product

VCR/DVD

When connecting with a S-Video cable

/RCA cable.

•

Connect to the S-Video input terminal to

watch high image quality movies.

B

AUDIO

OUT

VIDEO

OUT

ANT IN

S-Video

Product

VCR/DVD

S-Video Cable

(not included)

RCA cable

(not included)

W

R

RCA cable

(not included)

R

W

Y

Red

White

Yellow

Red

White

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

I/II

TV/AV

PR

VOLVOL

OK

*

/SSM

Select an input signal.

Press the SOURCE button on the remote control to select the input signal.

Or, press the SOURCE button at the front side of the product.

SOURCE

SET/AUTO

SOURCE

OK

A15

When connecting with an

SCART cable.

•

Select AV1

G

AUDIO

L

DR

Connect the video/audio cable as shown in the below figure and then, connect the

power cord (See page A11).

Product

HDTV /DVD

When connecting with a COMPONENT board.

* Please, use shielded

scart cable

When watching HDTV/DVD

SCART Cable

(not included)

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

I/II

TV/AV

PR

VOLVOL

OK

*

/SSM

Connecting to External Devices

Select an input signal.

Press the SOURCE button on the remote control to select the input signal.

Or, press the SOURCE button at the front side of the product.

SOURCE

SET/AUTO

SOURCE

OK

A16

When connecting the video/audio cable as shown in the below figure and then

connect the power cord. (See page A11)

PC

Audio

[Rear side of the Product]

[Set-top Box/DVD]

DVI-D cable

RCA/PC cable

When watching DVI-D(HDCP) from the DVD/Set-top BOX

W

R

•

Select DVI

Press the SOURCE button at the front side of the product.

SOURCE

SET/AUTO

Connecting to External Devices

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

I/II

TV/AV

PR

VOLVOL

OK

*

/SSM

A17

DC 24 V

Antenna Cable

(Not Included)

•

Select TV

See if the antenna cable is connected at the rear side of the product and

then, connect the power cord (see page A11).

When watching the TV

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

I/II

TV/AV

PR

VOLVOL

OK

*

/SSM

Connecting to External Devices

Select an input signal.

Press the SOURCE button on the remote control to select the input signal.

Or, press the SOURCE button at the front side of the product.

SOURCE

SET/AUTO

SOURCE

OK

A18

To arrange the cables

After connecting the cables neatly, arrange the cables to the Cable Holder as shown

in the following figure.

After connecting the cable, push and close the back cap using both hands as shown in the picture

below.

Back Cap

Cable Holder

Connecting to External Devices

A19

• The unit that receives the signal from the remote control.

(Cannot be seen from the exterior.)

Selecting and Adjusting the Screen

Name of the Buttons in the Screen Adjustment Unit

• Touch the Power On/Off sensor to turn on the power.

Touch the Power On/Off sensor again to turn it off.

• This Indicator lights up blue when the display operates normally(on

mode). If the display is in sleep (Energy Saving) mode, this indicator

colour changes to amber.

Power On/Off

sensor

Power Indicator

IR Receiver

A20

Selecting and Adjusting the Screen

A20

Name of the Buttons in the Screen Adjustment Unit

[For PC Analog signal]

[Other signals]

• The current signal and mode information will be displayed.

SET/AUTO Button

TV Television

AV1 SCART

AV2 Composite Video

S-Video Separate Video

RGB 15-pin D-Sub analogue signal

DVI DVI digital signal

• Select the input signal

SOURCE Button

• Adjust the volume.

• Use this button to directly control

brightness and contrast of the PC signal

(RGB / DVI).

• Use this button to show/hide the OSD (On Screen Display) menu

screen.

MENU Button

• Use

this

button to select an icon or adjust the setting in the OSD screen.

OSD Select /

Adjust Button

For optimal display change

resolution to 1360 X768

INPUT SELECT

TV

AV1

AV2

S-Video

RGB

DVI

Auto in progress

SOURCE

SET/AUTO

Page is loading ...

LG M2343A-BZ User manual

This manual is also suitable for

LG M2343A-BZ User manual

Related papers

Other documents