2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Mounting kits
  6. Midmark
  7. 6204, 6205 (Non-Powered)
6204, 6205 (Non-Powered)

Midmark 6204, 6205 (Non-Powered), 6206, 6207, 6208 (Non-Powered), 6251, 6252, 6256 (Powered Carts - DC), 6271 - 6276 (Wall Mounted Units) Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Midmark 6204, 6205 (Non-Powered) Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the required tools for installing the Hanging File Holder accessory?
    How do I install the Hanging File Holder accessory on a column?
    How do I install the Hanging File Holder accessory on a wall?
    What safety precautions should I take when installing the Hanging File Holder accessory?
9A439001
Installation Instructions
INS-9A439001 (Rev. A)
FOR COLUMN MOUNT:
Run screws into accessory
mounting bracket to within
1/16” of the bracket surface
Slip the HFH (Hanging
File Holder) accessory onto
the lower accessory mounting
bracket thru the keyhole slots
Attach HFH (Hanging File
Holder) accessory securely at
the top with the (2) screws
provided
Tighten the upper accessory
bracket to the table column by
tightening the screw shown
in #3.
Securely attach lower accessory
mounting bracket to the table
column at the desired height
Loosely attach the upper
accessory mounting bracket
1
2
4
3
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
Tools required:
Phillips head screwdriver
Electric Drill with Drive Extension
1/2” Drill Bit
Parts Included:
(1) CPU Mounting Bracket
(2) Sets of Mounting Bracket Assemblies
(4) 10-24 x 7/8” Long Phillips Drive Pan Head Machine Screws
(4) 10-24 x 1” Long Phillips Drive Pan Head Machine Screws
(4) 1/4-20 Heavy Duty Snap Togglers
(4) 1/4-20 x 2” Long Phillips Drive Pan Head Machine Screws
(2) Cable Ties
(1) Safety Strap
1.
Drill 1/2” size hole. Hold metal channel
fl at alongside plastic straps and slide
channel through the hole. Minimum
clearance beind wall: only 1 7/8”
(1/2” Hole)
9A439001
Installation Instructions
INS-9A439001 (Rev. A)
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
Tools required:
Phillips head screwdriver
Electric Drill with Drive Extension
1/2” Drill Bit
Parts Included:
(1) CPU Mounting Bracket
(2) Sets of Mounting Bracket Assemblies
(4) 10-24 x 7/8” Long Phillips Drive Pan Head Machine Screws
(4) 10-24 x 1” Long Phillips Drive Pan Head Machine Screws
(4) 1/4-20 Heavy Duty Snap Togglers
(4) 1/4-20 x 2” Long Phillips Drive Pan Head Machine Screws
(2) Cable Ties
(1) Safety Strap
FOR WALL-MOUNT:
Prior to installing CPU bracket assembly
to wall, follow instructions to install heavy
duty snap togglers into wall.
1
2.
3.
2
Once togglers are installed, attach Hanging
File Holder to wall by attaching and securing
with (4) 1/4-20 x 2” Long Phillips Drive Pan
Head Machine Screws.
Caution
Properinstallationoftoggleboltsrequired
toprovidesecurewallmounting.Minimum
drywallthicknesstobe½”.
/