ICP TPD-430-H Quick Start

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

TPD-430-H

4.3'' Touch Screen HMI Controller,

communicable over Modbus RTU

Quick Start Guide

Product Website:

https://www.icpdas-usa.com/tpd_430-H

1. Introduction

TPD-430-H, TouchPAD, is a series of tiny touch HMI designed for building and home

automation. TPD-433F is equipped with a high resolution TFT color touch screen and

can be used to replace regular electrical wall-mount outlets. It is seamlessly integrated

with rich I/O modules and presents a beautiful, flexible, and user-defined picture frame.

In short, it is the best choice to upgrade a mechanical switch to intelligent control pads.

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

2. Wirings

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

3. Install HMIWorks

Follow the steps to install the HMIWorks.

4. Setup Device

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717

TPD-430-H 4.3” TouchPAD - QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 2430-H9 Narbonne Ave. Suite 200. Lomita, CA 90717