2. ICP
  3. TPD-280U

ICP TPD-280U Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ICP TPD-280U Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
TPD-280U
2.8'' High Resolution Touch Screen HMI Controller
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/tpd_280_w.html
1. Introduction
This quick start manual will guide users to implement the TPD-280U module into
their applications in a quick and easy way. This will only provide with the basic
instructions. For the more detailed information, please refer to the TPD-280U user’s
manual located on the ICPDAS CD-ROM or from ICP DAS web site:
http://www.icpdas-usa.com/documents/user-manual-TPD-280U.pdf
The ICP DAS Touchpad is a small touch screen controller HMI designed for building
and home automation and supports Modbus protocols. TPD-280 and TPD-280U touch
screen HMI's are equipped with a high resolution 2.8'' TFT color touch screen, 32-bit
RISC CPU, and RS-485 serial port. TPD-280U also features a real time clock and a
USB port for convenient interfacing with a PC. TPD-280/U touch screen controller
supports Modbus RTU protocols.
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2. Wirings
Data+ and Data- are signal pins in the RS-485 network
VDC/GND are power (+10 ~ 30 VDC) and ground
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
3. Install HMIWorks
Follow the steps to install the HMIWorks.
4. Setup Device
Before downloading programs to the TPD-280U, be sure to setup TPD-
280U first.
Run HMIWorks_Standard.exe and click on the menu: Run Setup
Device. Simply choose com port then press OK.
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
5. TPD-280U Workflow
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
6. Integrate with I/O modules
In this example, we use TPD-280U to control an I-7066, the 7-channel
photo-MOS relay output module of ICP DAS. First, put I-7066 in the same
RS-485 network of TPD-280 and configure I-7066 with DCON Utility.
Step 1. Configure I-7066 Using DCON Utility
Download DCON Utility and its user manual on
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/ Then
configure I-7066 with DCON Utility. Mainly, Address(Net ID), Baudrate,
Databit, Parity, Stopbit should be set.
Step 2. Create a New Project
Go to the menu: File New…, and here we choose programming type
as [2] Ladder Program.
TPD-280U 2.8” TouchPAD - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
Step 3. Register Device
Create a new connection first in the Workspace. And then press F3 key to evoke the
“Devices” window to register I-7066.
Then select the picture which represents the tag. Drag and drop the tag
that is corresponding to the DO0 of I-7066 to the frame design space. On
the frame design space, the picture you just pick is now on the frame.
/