3M
™
Paradigm
™
Temporization Material
Tips for Success
Fig. 2: Remove interproximal septa.
Fig. 1: Remove excess material as
needed.
Fig. 4: Bleed a small amount of
material through the mix tip before
dispensing in the matrix. Discard
extruded material.
Fig. 3: Reposition matrix in the mouth
to confirm proper fit.
Fig. 14: Remove the excess.
Fig. 6: Make sure to fill from the
bottom up and to always keep the tip
immersed in the temporary material to
prevent voids. (Working time: 40 sec.)
Fig. 5: Dispense material into the
impression or matrix.
Fig. 8: Check setting progress with
excess material.
Fig. 7: Seat in the mouth and hold
firmly in place.
Fig. 11: Remove oxygen inhibited layer
with ethanol.
Fig. 9: Remove from mouth between
1:40 and 2:50 (min:sec) from the
onset of mixing.
Fig. 10: Leave material in the matrix
for 5:00 (min:sec). This is important to
achieve a smooth and shiny surface.
Fig. 13: Cement provisional
restoration using a temporary
cement.
Fig. 12: Finish and polish as needed.
DON’T FORGET TO:
• Bleed cartridge before rst use
• Bleed tip before each use
• Use only approved 3M
™
Mixing Tips
• Adhere to working and setting times as detailed in the
Instructions for Use
• Following each use, use the mix tip as the cap for sealing
cartridge during storage
OPTIONAL
!
3M, Filtek, Garant, Paradigm and Protemp are
trademarks of 3M or 3M Deutschland GmbH.
Used under license in Canada. Please recycle.
Printed in USA. © 3M 2017. All rights reserved.
70-2013-0860-1
www.3M.com/dental
3M Oral Care
2510 Conway Avenue
St. Paul, MN 55144-1000 USA
Phone 1-800-634-2249
Web 3M.com/dental
3M Canada
Post Oce Box 5757
London, Ontario N6A 4T1
Canada
Phone 1-888-363-3685
3M Business Name
3M Center, Building 220-12E-04
St. Paul, MN 55144 USA
Phone 1-800-328-3908
Fax 1-800-328-3909
Email [email protected]
Web mmm.com/areaofexpertise
Please recycle. Printed in USA © 3M 2015.
All rights reserved. 70-0000-0000-0
Ventibus eveni sum.
At litati cum fuga.
Sae comnis dolent volupta tectemo
lorerit aturem restiaspiet volendis
es eaquaspeles dit eumquosae
prepernam, tet quam voluptatur
re lamus audipsapero doluptae.
Quatatempos sapitisserio ma
ipit aborum eum aut ma volo
molor autem nost, nes a ditatiis
simodisquam quistrum facerro
consentio mosam quaeseq
uoditatio.
Uptatiam late rent aut aribusci
ullori vernatur molupta consedion
et pra nullaccabore sumquam
laborro rehendi cum volupta ssinis
aut accus sim solendiae magnim
verovit voluptatur aspicto in culla
qui omnis dipsandi ommo dus, quis
quam harum estrum cone et es ima
volut litate laborec uptions eratetus
molor repudi simusam quassimod
ut qui doloribus, omnisit earibearum
et plabor assenim qui omniminusam
ium et dollabo rerchitasi te voluptat
res quo qui temqui ipsam exces
nullut quo de alitiusdae sectota solo
earum fugia im quassuscit, atiae
perae sequia aut explic tempos iunt
quam litae dolenim laut voluptas
dolorest aciaestios et lam et dolendi
auta verrum dunt que doluptur
sinciata et doluptatur? Sanditame
vita velest ea consequi reptae solo et
inumque repratq uatusda.
Sae comnis dolent Volupta tectemo Sae comnis dolent Volupta tectemo
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456W 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
23456 56789 56897 23485
123456 23456 56789 56897
3M
™
Paradigm
™
Temporization Material...
Innovative solutions for your temporary needs.
Shades match 3M
™
Filtek
™
Supreme Ultra
Flowable Restoratives
Three popular shades (A1, A2 and A3) match beautifully
with global market leader Filtek Supreme Ultra Flowable
restoratives.
A1
A2
A3
Ordering Information
Item No. Product Information
3M
™
Paradigm
™
Temporization Material
Rells
46993 3M
™
Paradigm
™
Temporization Material Rell – A1
Includes: 1 cartridge – 50ml, A1; 16 cartridge mixing tips,
blue; Instructions
46994 3M
™
Paradigm
™
Temporization Material Rell – A2
Includes: 1 cartridge – 50ml, A2; 16 cartridge mixing tips,
blue; Instructions
46995 3M
™
Paradigm
™
Temporization Material Rell – A3
Includes: 1 cartridge – 50ml, A3; 16 cartridge mixing tips,
blue; Instructions
Mix Tips
71453 3M
™
Garant
™
Mixing Tips
Includes: 50 – Blue
3M
™
Paradigm
™
Temporization Material
Rell – A1
3M
™
Paradigm
™
Temporization Material
Rell – A2
3M
™
Paradigm
™
Temporization Material
Rell – A3
/
