3M Protemp™ Plus Temporization Material User guide

3M
Brand
3M
Model
Protemp™ Plus Temporization Material
Type
User guide
P r o t e m p
™
Plus
Temporization Material
40 sec.
Working time.
40 sec.
Working time.
0:40 – 1:40 min.
Setting time in
the mouth.
From 1:40 min.
Remove from mouth and matrix.
Trim margins.
2:50 min.
Latest point of removal from mouth.
From 5:00 min.
Remove oxygen
inhibition layer.
Final finishing.
1:40 min.
Earliest point
of removal from
the mouth and
matrix
0:40 – 1:40 min.
Setting time in
the mouth.
1:40 – 2:50 min.
Matrix removal
from mouth.
2:50 – 5:00 min.
Final setting.
From 5:00 min.
Remove oxygen
inhibition layer.
Trim margins.
Final finishing.
1:40 min.
2:50 min.
5:00 min.
Latest point
of removal from
the mouth
Earliest point
of removal from
the mouth
Earliest point
of removal from
the matrix
For faster results
For optimum surface
smoothness and gloss
Technique Timelines
*
* Times are applicable at a temperature of 23 °C/74 °F and at 50% relative humidity.
Higher temperatures shorten these times, while lower temperatures extend them.
060103M_PTP_PAI_LY5.indd 1 01.03.2010 17:58:23 Uhr
Dental Products
3M Center
Building 275-2SE-03
St. Paul, MN 55144-1000
U.S.A.
1-800-634-2249
3M, ESPE and Protemp are
trademarks of 3M or 3M ESPE AG.
© 3M 2010. All rights reserved.
44000757904/03
060103M_PTP_PAI_LY5.indd 2 01.03.2010 17:58:23 Uhr
  • Page 1 1
  • Page 2 2

3M Protemp™ Plus Temporization Material User guide

3M
Brand
3M
Model
Protemp™ Plus Temporization Material
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents