Luxor LOTM16 Operating instructions

Type
Operating instructions

This manual is also suitable for

AB
C
DEF
G
H
J x 17
K x 32
(+ 2 extra)
L x 2 M x 2 P x 4 Q x 4 R x 9 S x 8 T x 2 V x 2 W x 2
Open Charging Assembly Guide
Part List
Tools Included: Tools Needed:+
X
C
D
R
R
R
A
B
L
M
QP
L
M
QP
Step 1: Attach the casters (L & M) to the side frames
(A & B) with the lock washer (Q) and acorn nut (P),
using the included wrench.
Step 2: Combine the back panel (C) to
the bottom panel (D) with 3 screws (R),
using the included hex wrench.
Step 3: Attach side (B) to panels (C & D)
with 3 screws (R), using the included
hex wrench.
Step 4: Attach side (A) to panels (C & D)
with 3 screws (R), using the included
hex wrench.
R
R
R
R
R
R
A
B
C
D
C
D
Step 5: Attach the power tray panels (E & F) to
the main unit with 2 screws (S), using a screw driver.
Step 6: Attach the bottom power tray panel (G)
with 2 screws (S) from below, using a screw driver.
Attach the 2 power strip brackets
(T,V,& W) to the panel (G) with a screw driver.
Step 7: Push the power strip (X) into the brackets.
Step 8: Install the power tray back panel (H)
with 4 screws (S), using a screw driver.
Step 8: Attach the 32 cable clips (K)
to the main unit.
Step 9: Install the 17 plastic dividers (J)
to the main unit. You have completed assembly.
F
E
S
S
V
W
G
S
H
S
X
K
J
T
  • Page 1 1
  • Page 2 2

Luxor LOTM16 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages