Siterwell GS511-B-H61 Smoke Alarm User manual

Brand
Siterwell
Model
GS511-B-H61 Smoke Alarm
Type
User manual
-10- -11-
Moun
•Place the moun te on the desired installa a
where the holes should be drilled.
•Drill two holes with a diameter of 5 millimetres.
•Push the plas to the holes.
•Insert the screws into
the moun te,
ten them
firmly into the plugs.
•Place the smoke alarm
on the moun
bracket and secure it
by turning it clockwise.
•Test the correct
opera our
smoke alarm by
pressing the test
on. If no sound is
generated, the smoke
alarm is not
operly
and should not be
used!
Alarm silence facility
When the smoke alarm has detected smoke and turns into the alarm
mode, you can mute the alarm for approx 10±1 minutes by pressing
the cause of the alarm and make sure that the circumstances are safe.
Low ba ery mode
When the ba ery is running low, the smoke alarm will indicate this with
a r e beep and flash for approximately 30 days. WARNING: This
smoke alarm is equipped with a non-replaceable ba ery. When this
warning occurs, replace the device as soon as possible! The acous
ba ery warning signal can be muted for ten hours by pressing the test
on. The smoke alarm is s o detect smoke
when it's in this mode.
Fault warning mode
When the smok operly, it will turn into the
fault warning mode. Try cleaning the smoke alarm (see paragraph
maintenance) or replace the smoke alarm!
Maintenance
•Test this smoke alarm weekly for correct opera est
facility. If the smok orrectly, it will generate a loud
beep. Due to the loudness of the alarm, make sure that you always
stand at arm’s length distance from the unit when you are tes
the smoke alarm does not generate an acous e
alarm must be replaced immediately!
•Clean the smoke alarm at least once per month to remove dirt, dust or
debris. Use a v acuum all sides
and covers of the smoke alarm. Do not remove the top cover of the
smoke alarm to clean it inside.
•Do not a empt to repair this smoke alarm. If the smoke alarm shows a
damage related t , it must be replaced!
•Tr en caused by dust or steam.
Recycling and disposal
The WEEE symbol means that this product and ba eries
must be disposed separately from other household waste.
When they reach their end of life, take them to a designated
waste c t in your area to guarantee a safe disposal or
recycling. Protect the environment, human health and natural resources!
Overview visual & acous
Opera Visual (flash) Acous
Normal 1 x per 40 seconds None operly
Test 1 x per second (3 x) / 1 x per seconds (3 x) / Device is being tested
pause of 1,5 seconds pause of 1,5 seconds
Alarm 1 x per second (3 x) / 1 x per seconds (3 x) / Device has detected smoke
pause of 1,5 seconds pause of 1,5 seconds
Wireless alarm None 2 x per seconds Connected device detected smoke
Alarm silence 1 x per 8 seconds None Smoke alarm is muted
Low ba ery warning 1 x per 40 seconds 1 x per 40 seconds Ba ery is running low
Connected low ba ery warning 1 x per 3 hours 1 x per 3 hours Ba ery of connected device is running low
Low ba ery warning silence None None Low ba ery warning is muted
Fault warning None 1 x per 40 seconds operly
Revision date: 17-02-2022
Ceiling
SMOKE ALARM
GS511-B-H61 USER MANUAL
Document nr.: GS511-B-H61_Manual Revision nr.: A
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
IC warning
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.
Dop: (GS511-B-H61)-CPR-001
EN 14604:2005/AC:2008 0359
Fire Safety
Product type : Smoke alarm
Item number : GS511-B-H61
Manufacturer : Siterwell Electronics CO.,
Limited : No.666 Qingfeng Road,Jiangbei District,
NingboZhejiang Province, China
Website : www.china-siter.com
Iden a
ESSENTIAL CHARACTERISTICS: PASSED
Nominal activation conditions/ Sensitivity, Response delay (response time) and
Performance under fire condition - Operational reliability - Tolerance to supply voltage
-Durability of operational reliability and response delay, temperature resistance,
vibration resistance, humidity resistance, corrosion resistance, electrical stability
Download the Declaration of Performance at www.china-siter.com
-1- -2- ͲϯͲ
dŚĂŶŬyou for purĐŚĂƐŝŶŐŽƵƌƐŵŽŬe alarm!
Please read these ins areĨƵůůLJĂŶĚstore them in a safe place
where LJou can access them easilLJ.
Pr tended use
This is a smoke alarm with r al sensor for
installa esiden ts and rooms with
residen e use. Smoke alarms are designed to prŽǀŝĚĞĂŶĞĂƌůLJ
wĂƌŶŝŶŐŽĨĮƌe smokĞĂŶĚĮƌes to persons present, so that these persons
can react appropriatĞůLJto the hazardous event. AlwaLJs consult local
regula or smoke alarms.
PrŽĚƵĐƚƐƉĞĐŝĮĐa
Det : al
PowĞƌƐƵƉƉůLJ : Sealed ba ĞƌLJϯs
Ba ĞƌLJůŝĨ sraeLJ 01:
Alarm volume : шϴϱĚ;ͿĂƚϯŵĞters
Monitored area : ϰϬŵϸ
Opera emperature : ϬΣͲϰϱΣ
Opera : фϵϯй
Date of replacement : See product label
Individual alarm indicator : Yes
ůĂƌŵƐŝůĞŶĐĞĨĂĐŝůŝƚLJ :
Low ba ĞƌLJwarning : Yes
Low ba ĞƌLJƐŝůĞŶĐĞĨĂĐŝůŝƚLJ : Y : 10 hours
Installa e
accommoda ehicles
Moun a
Interconnectable
Wireless frĞƋƵĞŶĐLJ
Wireless distance
: No
: Ceiling or wall
: zĞƐͮŵĂdž͘ϰϬ Devices
: ϵϭϱ͘ϯD,nj
: DĂdž͘ϭϬϬŵĞƚĞƌƐ
Warnings:
ͻTo prevent injurLJ, this apparatus must be securĞůLJĂ ached to the
ĐĞŝůŝŶŐͬwall in accordance with the installa
ͻBa eries should not be edžƉŽƐĞĚto edžcessive heat such as sunshine,
Įƌe or the like.
ͻDo not paint or cover the smoke alarm.
tŚĞre to install a smoŬe alarm
Smoke alarms must be installed in such a waLJƚŚat theLJcan be reached
unhinderĞĚďLJƚŚĞĮƌe smoke so thaƚĮƌes can be rĞůŝĂďůLJĚĞtected during
the development phase.
ͻInstall at least in sleeping arĞĂƐ;ĞƐƉĞĐŝĂůůLJĐŚŝůĚƌen's rooms).
ͻInstall at least in escape rooms.
ͻIn the middle of the ceiling of a room.
ͻAt least 50 cm awaLJĨrom the wall and other objects.
ͻMadžŝŵƵŵŝŶstalla ƚŽĨϲŵĞter.
ͻ
ŽŶƚŚĞǁĂůů͘dŚĞĚŝƐƚĂŶĐĞƚŽƚŚĞĐĞŝůŝŶŐƐŚŽƵůĚďĞďĞƚǁĞĞŶϯϬĂŶĚϱϬ
tŚĞre to install a smoŬe alarm in rooms
ǁŝƚŚƐƉĞĐŝĂůgeometries
ͻCorridors with a madžŝŵƵŵǁŝĚƚŚŽĨϯŵ͗DĂdž͘ϭϱŵďĞƚǁeen 2 smoke
alarms. Madž͘ϳ͕ϱŵƚo the front side of the gĂůůĞƌLJĂŶĚƐŵŽke alarms
at edgesͬcrossings of corridors.
ͻRooms with sloping ceilings:
- If the ceiling inclina o the horizontal: Smoke alarms
must be installed at least 0.5 m and at most 1 m from ceiling top.
- P ŽŽĨƐůŽƉĞƐ͗/ĨƚŚĞŇaƚĐĞŝůŝŶŐŝƐчϭŵǁŝĚĞ͕Đonsider as ceiling
inclina t ceiling is >1m wide, cŽŶƐŝĚĞƌĂƐŇĂt
ceiling.
ͻRooms with subdivided ceilings:
- HeighƚŽĨƚŚĞƐƵďĚŝǀŝƐŝŽŶƐŝƐчϬ͘Ϯŵ͗ĞĂŵƐǁŝƚŚŽƵƚĐonsidera
smoke alarm maLJďĞŝŶstalled on the beams as well as on ceiling.
- Height of subdivisions is > 0.2 m and arĞĂŽĨĐĞŝůŝŶŐƉĂŶĞůƐхϯϲŵϸ͗
Smoke alarm should be installed in each ceiling panel.
- Height of subdivisions > 0.2 m and arĞĂŽĨĐĞŝůŝŶŐƉĂŶĞůƐчϯϲŵϸ͗
Individual ceiling without considera
tŚĞre not to install a smoŬe alarm
ͻIn an environment with a high risk of draught (e.g. close to air
c, fans and ven ement of air can
impair the penetra e smoke into the smoke alarm.
ͻAreas where combus ĞŐƵůĂƌůLJŽĐĐƵrs, such as kitchens.
ͻArĞĂƐǁŝƚŚŚŝŐŚŚƵŵŝĚŝƚLJƐƵĐŚĂƐďathrooms, or close to devices such
as dish washers or washing machines.
a
Before commissioning the smoke
alarm, it is important t ate it
and test it for correct opera
ͻUse a screw driver to push the
a ch to the right.
When the smoke alarm is
ated, the LED lights up.
ͻ Test the corr a our
smokĞĂůĂƌŵďLJƉressing the test
on. If no sound is generated,
the smok ated
prŽƉĞƌůLJĂŶĚƐŚŽƵůĚŶŽƚďĞƵƐĞĚ͊
Connect your smoŬe alarms
1. Choose one smoke alarm as the master smoke alarm.
2. Turn LJour master smoke alarm into the cŽŶŶĞĐƚŵŽĚĞďLJƋƵŝĐŬůLJ
pressing the tes
ϯ͘ The red LED will light up red, followĞĚďLJƚŚĞďůƵĞ>D. This indicates
that the smoke alarm turned into the connect mode in which it
remains fŽƌϯϬƐĞconds.
ϰ͘ Turn the nedžƚƐŵŽke alarm intŽƚŚĞůĞĂƌŶŵŽĚĞďLJƋƵŝĐŬůLJƉressing
the tes
5. The red LED will light up, followĞĚďLJƚŚĞŐreen LED. This indicates
that the smoke alarms are connected to each other.
ϲ͘ Repeat step 1 to 5 for c e smoke alarms. Make sure that
LJou alwaLJs use the same master smoke alarm!
ϳ͘ Test if the LJour smoke alarm were connected successĨƵůůLJďLJƉressing
the tes on of a random device un ed LED of all
connectĞĚĚĞǀŝĐĞƐǁŝůůŇĂƐŚƚǁŝĐĞƉĞƌƐĞĐond fŽƌĮǀe minutes. Stop
ƚŚĞƐĞĂůĂƌŵƐďLJƉressing the tes on of each alarm.
Reset c
1. Disconnect the smoke alarm LJou want to rĞƐĞƚďLJremoving it from
the moun t a ch to the le
with a screw driver.
2. Press and hold the tes ate the smoke alarm agĂŝŶďLJ
a ch to the right.
ϯ͘ Hold the tes on while the LED lights up red and release it when
the LED turns of.
ϰ͘ When the LED lights up again, press the tes on.
5. The LED will stĂƌƚŇĂƐŚŝŶŐƚo indicate that it the network is being
cleared.
ϲ͘ tŚĞŶƚŚĞ>ƚƵƌŶƐŽī, the c ĨƵůůLJĐůĞĂred.
ϳ͘ Repeat step 1 tŽϲfor disc e smoke alarms.
Minimum Res
a
switch
ated
backside smoke alarm
Test &
LED indicator
Sound output
ͲϰͲ -5- ͲϲͲ
+
!
1. Choose one smoke alarm as the master smoke alarm
master smoke alarm smoke alarm
ϯ͘ ZĞĚ>ĨŽůůǁĞĚďLJďůƵĞ>
master smoke alarm master smoke alarm
master smoke alarm
ϲ͘
smoke alarmmaster smoke alarm
2.
master smoke alarm
ϰ͘
smoke alarm
5.
smoke alarm smoke alarm
Test if tŚĞLJŽƵƌƐmoke alarm were
ĐŽŶŶĞĐƚĞĚƐƵĐĐĞƐƐĨƵůůLJďLJƉƌĞƐƐŝŶŐƚŚĞ
beeps. the red LED of all connected
devices ǁŝůůŇĂsh twice per second for
ĮǀĞŵŝŶƵƚĞƐ͘^ƚŽƉƚŚĞƐĞĂůĂƌŵƐďLJ
ŽŶŶĞĐƚLJŽƵƌƐŵŽŬĞĂůĂƌŵƐ
ͲϳͲ ͲϴͲ ͲϵͲ
1.
2.
ϳ͘
ϯ͘ ϰ͘ 5. >ǁŝůůŇĂƐŚƚŽŝŶĚŝĐĂƚĞƚŚĂƚƚŚĞ
network be cleared.
ϲ͘ >ƚƵƌŶƐŽīŝŶĚŝĐĂƚĞƚŚĂƚƚŚĞ
or
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Siterwell GS511-B-H61 Smoke Alarm User manual

Brand
Siterwell
Model
GS511-B-H61 Smoke Alarm
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents