2. eMACROS
  3. HS002
HS002

eMACROS HS002 User manual

  • Hello! I've reviewed the Quick Start Guide for the EMACROS Motion Sensor HS-002. This document provides instructions on how to power, pair, and install the device, as well as adjust the settings. I am ready to answer any questions you have about the described features or setup.
  • How do I turn on the Base Station?
    How do I adjust the Base Station volume?
    How do I test the PIR Motion Sensor?
Overview
Sensor 
Antenna
Zone 1 to Zone 4,
LED Indicator
Volume+

LED indicate Volume-
Power
AC Adapter input
Micro USB port

Plate
Ball-joint
adjustment
screw(on
the back) Sensor Eye
AC Adapter input
Micro USB port
Powering and Pairing Sensor and Receiver
Sensor
(4) 

(Red + /Black -)
(5) 


Note: The sensor has been tested several mes in the factory. If the blue light
wont illuminate, the baery may be fully charged, you can install it directly.
(6) 



Note: Each separate channel uses an unique chime, allowing you to match
different chimes with different channels.
Base Sta�on
(1) 





 not
 bases

• •
•
•
•
•
Installing the Sensor
1) 



        
          
please adjust 
•
•
Troubleshoo�ng
• The PIR Mo�on Sensor operates, but the base sta�on does not respond.


Install 4xAA


AC Adapter
Recommended
B-
B+ Red
Black

screw

plate

screws

masonry
screw anchors
Sensor back
plate screws


https://www.youtube.com/watch?v=6Qn9o3pVL2o
Video Link
HY-001
/