Honeywell 221729 Dust Cover Operating instructions

Type
Operating instructions
7800 SERIES
221729
Dust Cover
Application
The Honeywell 7800 SERIES is a microprocessor-
based integrated burner control for automatically fired gas,
oil, coal or combination fuel single-burner applications.
The 7800 SERIES is programmed to provide a level of
safety, functional capability and features beyond the ca-
pacity of conventional controls. Functions provided by the
7800 SERIES include automatic burner sequencing, flame
supervision, system status indication, system or self diag-
nostics and troubleshooting.
The Dust Cover provides a protective cover for configu-
ration jumpers and plug-in purge timers (if applicable) on
the RM7823A Primary Flame Switch, RM7885A Manual
Start Primary, RM7890A, B Primary Control, RM7895A,
B, C, D Primary Control and RM7840E, G, L, M Auto-
matic Programming Control.
Fig. 1—221729 Dust Cover dimensions in inches
[millimeters].
4 [123]
27
32 29
32 5
8
[23]
3
4
2
[70]
13
32 [10] [16]
M5005A
BURNER CONTROL
DIMENSIONS: See Fig. 1.
WEIGHT: 2.56 ounces unpacked.
MOUNTING THE DUST COVER, See Fig. 2.
1.Align the two interlocking ears of the Dust Cover
with the two mating slots on the RM7823, RM7885,
RM7890, RM7895 or RM7840 Relay Module.
Fig. 2—Dust Cover mounting.
Residential and Residential and Helping You Control Your World
Building Controls Division Building Controls Division
Honeywell Inc. Honeywell Limited—Honeywell Limitée
1985 Douglas Drive North 740 Ellesmere Road
Golden Valley, Minnesota 55422 Scarborough, Ontario
M1P 2V9 QUALITY IS KEY
2.Insert the two interlocking ears into the two mating
slots and with a hinge action push on the upper corners of
the Dust Cover to secure it.
3.Verify that the Dust Cover is firmly in place.
P.G. • Rev. 2-92 • © Honeywell Inc. 1992 • Printed in Mexico
Form Number 65-0097—1
65-0097-1
  • Page 1 1

Honeywell 221729 Dust Cover Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI