Smart Watch – ZW27
User's Manual
Install APP
Enter the bracelet menu seng interface - APP download - click to enter and scan the QR code
with your mobile phone or enter the "APP store", download and install "JYouPro" in major
Android applicaon markets (app treasure/Baidu assistant)
QR for Android - QR for iOS
Requirements
Instrucons for rst use
- Open the mobile APP
- Click the device icon
- Add device iOS/Android
- Scroll down to nd the device
- Click to connect
Instrucons
When using the watch for the rst me, make sure that the watch is fully charged. The watch
will start automacally aer charging.
Note: Aer charging is completed, pull out the charging cable from the USB charging
Align the charging head and t the Charging dock unl the charging icon appears on the watch
screen (connuous charging with a 5V charging head for 2-3 hours).
Power on: In the o state, press and hold the power buon for 3 seconds to power on. The
watch will automacally turn on when charging.
Power o: When the watch is turned on, long press the power buon, the page number will pop
out of the power o interface, aer selecng, the watch will power o, or enter the menu, click
the power o icon to enter the power o interface to shut down
Main Interface
When the bracelet and the APP are paired and connected for the rst me, the me, date and
other informaon of the phone will be synchronized.
Note: Press and hold the screen for 2 seconds on the main interface to switch between mulple
screen dials
Power-on State
Switch the main menu interface, such as the interface shown below;
Audio Bluetooth Connecon
Enter the Bluetooth sengs of the mobile phone, nd the Audio corresponding to the Bluetooth
model of the product (such as ZW27T-BT), click Connect, and it shows connected, which means
the connecon is successfull.
Note: You can use it alter making a phone call to listen to music on an Apple mobile phone.
Shortcut Interface
As shown in the gure below, slide down to enter the shortcut interface. It can turn on and turn
o audio Bluetooth, sengs, ashlight, lock screen, menu style, screen brightness adjustment
and other funcons.
Praccal Funcon
1. Pedometer:
As shown in the gure, it is the step counter interface of the bracelet. This interface mainly
displays the total number of steps counted on the day, and can also display the total number of
calories burned that day. This content can also be viewed in the mobile APP aer connecng the
bracelet.
2. Heart Rate:
As shown in the gure, it is the heart rate measurement interface. The content can also be
viewed in the mobile APP aer connecng the bracelet. When measuring, the value will jump
and change in real me, and the watch will automacally stop measuring aer 60 seconds.
3. Bluetooth Call:
The gure shows the dialing interface: Aer connecng to the mobile phone, you can quickly
search for contacts based on the address book and recent calls list, or you can dial directly.
Note: Apple mobile pone needs to be connected to audio Bluetooth
4. Sleep Interface:
As shown in the gure, it is the sleep status interface. This interface mainly displays the total
sleep me last night. The content can also be viewed in the mobile phone APP aer connecng
the bracelet. No sengs are required. Aer 20 o'clock in the evening, if a sleep state is detected,
it will automacally enter sleep mode.
5. Informaon Push:
Aer the bracelet is connected to the mobile phone, the bracelet receives mobile phone text
messages, calls, WeChat and other third-party instant messaging messages and nocaons.
Note: When the bracelet is connected to the mobile phone, and turn on the corresponding
prompt switch in "Sengs" -> "Nocaon Conguraon" on the mobile APP.
6. Bluetooth Music:
As shown in the gure, it is the music control interface: aer connecng the phone, the watch
can control the player of the phone, the phone is playing the music interface, aer clicking in,
you can use the watch to control the phone music to play/pause, previous song, next song
operate.
7. Weather:
As shown in the gure, the weather page will display the current weather today and tomorrow's
weather. The weather informaon needs to be connected to the client before the data can be
obtained. If the connecon is disconnected for a long me, the weather informaon will not be
updated.
8. Shut Down:
As shown in the gure, aer clicking "Conrm", the bracelet starts to shut down and is in a sleep
state.
9. Reset:
Aer clicking "Conrm", all the informaon on the bracelet will be erased and the default factory
sengs will be restored.
10. Unbind:
Android phones can be disconnected from the phone by simply clicking Remove Device. Aer
the iPhone is unbound, you sll need to set up - Bluetooth, click the symbol on the right, and
choose to ignore this device.
Common Problems
1. Why does the bracelet automacally disconnect the Bluetooth connecon aer the screen
of the Android phone is o?
A >.Lock the background app. Aer the JYouPro process is cleared, the bracelet will be
disconnected from the phone.
B >Set the APP to start automacally.
C >Unlimited running in the background. The Android phone installs the APP, the default is to
intelligently restrict the background operaon, you need to manually set the APP without taking
any restricve measures
2. Why can't the bracelet receive push nocaons?
A >.Conrm that the message push switch is turned on on the mobile client.
B >.The conrmaon message can be displayed normally in the nocaon bar of the phone,
and the push of the bracelet message is through reading Push nocaons in the nocaon
bar of the mobile phone; if there is no message displayed in the nocaon bar of the mobile
phone, the bracelet will not be able to receive the push. (You need to nd the nocaon
sengs in the phone sengs, and turn on the nocaon switch of WeChat, QQ, phone, SMS,
and mobile client).
C >Open the phone - sengs, the top search box, enter "nocaon usage rights", and reopen
JYouPro.
3. Why can't I take a hot bath with my bracelet?
Answer: The temperature of the bath water is relavely high, it will produce a lot of water vapor,
and the water vapor is in the gas phase, and its molecular radius is small, and it is easy to inltrate
from the gap of the shell of the bracelet. When the temperature drops, it will condense into
liquid again. Phase droplets can easily cause a short circuit in the internal circuit of the bracelet,
damage the circuit board of the bracelet, and then damage the bracelet.
4. Why does the Bluetooth connecon icon keep ashing?
Answer: The user will encounter this problem. The main funcon is to remind the user that if the
APP is not connected to the bracelet, there will be a phenomenon that the message cannot be
received. Open the APP to connect the bracelet, the Bluetooth icon can be displayed normally.
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
VIETA SJ8 User manual
-
Halo KR80 User manual
-
Accutime MTB052 User manual
-
Trevi T-Fit 220 HB User manual
-
LISKA SV-34DF Operating instructions
-
AGPtek SW03 Owner's manual
-
suinsist F30 User guide
-
Smart Bracelet 1.3-inch Smart Heart Rate and Blood Pressure Bracelet User guide
-
Efolen I22 Smart Watch User manual
-
LEMONDA CF81 User manual
