SWITEL WTE014 Owner's manual

Page is loading ...

2

Bedienungsanleitung 3. . . . . . . . . . .

Mode d’emploi 20. . . . . . . . . . . . . .

Istruzioni per l’uso 37. . . . . . . . . . . .

Operating Instructions 54. . . . . . . . .

Declaration of Conformity 72. . . . . . .

Page is loading ...

31

Contents

54

1 Safety Information 55. . . . . . . . . . . . . . .

2 Preparing the Walkie−Talkies for Use 57. .

3 Operating Elements 59. . . . . . . . . . . . . .

4 Operating the Walkie−Talkies 60. . . . . . .

5 In Case of Problems 67. . . . . . . . . . . . .

6 Technical Properties 68. . . . . . . . . . . . .

7 Maintenance / Guarantee 69. . . . . . . . . .

8 Index 70. . . . . . . . . . . . . . . . . . . . . . . .

Safety Information

55

1 Safety Information

Please read this operating instruction manual thoroughly.

Intended use

These walkie−talkies have been conceived for communication with

other walkie−talkies complying to the same standards. Any other

use is considered unintended use. Unauthorised modification or

reconstruction is not permitted. Under no circumstances open the

devices or complete any repair work yourself.

Ambient conditions

Prevent excessive exposure to smoke, dust, vibration, chemicals,

moisture, heat and direct sunlight.

Do not use the walkie−talkies in potentially explosive areas.

Power supply

Caution: Only use the power adapter plug supplied

because other power supplies could damage the walkie−

talkie equipment. Ensure access to the power adapter

plug is not obstructed by furniture or such.

Rechargeable battery pack

Caution: Never throw batteries into a fire. Only use batte-

ries of the same type! Pay attention to correct polarity. In-

correct polarity of the batteries represents a risk of explo-

sion during charging.

Medical equipment

Caution: Never use the walkie−talkies in the vicinity of me-

dical equipment. Effects on such equipment cannot be

fully ruled out. Walkie−talkies can cause an unpleasant

humming sound in hearing aids.

Safety Information

56

Disposal

You are obliged to dispose of consumable goods accord-

ing to legal requirements. The adjacent symbol indicates

that electrical and electronic apparatus and batteries no

longer required must be disposed of separate from domes-

tic waste.

Electrical and electronic devices must be disposed of

at suitable collection points provided by the public waste

authorities.

Batteries must be disposed of at the point of sale or at

appropriate collection points provided by the public waste

authorities.

Packaging materials must be disposed of according to

local regulations.

Preparing the Walkie−Talkies for Use

57

2 Preparing the Walkie−Talkies for Use

Safety information

Caution: It is essential to read the Safety Information in

Chapter 1 before starting up.

Checking the package contents

The package contains:

− two walkie−talkies with belt clip − two rechargeable battery

packs

− two headsets − a power adapter plug

− an operating manual

Inserting the battery packs

Open the battery compartment cover. Insert the battery pack sup-

plied. Pay attention to correct polarity. Close the battery compart-

ment cover.

Caution: Standard battery packs or batteries are not char-

ged. Only use the battery packs supplied or ones of the

same type.

Preparing the Walkie−Talkies for Use

58

Charging the battery pack

Connect the walkie−talkies as illustrated in the diagram. For safety

reasons, only use the power adapter plug supplied.

Mains power outlet

Before using the walkie−talkies for the first time, charge them for at

least 14 hours. When the walkie−talkies are connected correctly, the

red LEDs light up. The LEDs only signal that the connection is cor-

rect and continue to light up even when the battery packs are fully

charged.

Do not charge the walkie−talkies with charging units from

other manufacturers.

The current battery charge status is indicated in the display:

Full Half empty Low Empty

As soon as the indicator flashes in the display and acou-

stic warning signals are issued, the battery pack needs to

be recharged.

Attaching the belt clip

Insert the belt clip in the opening

provided until it audibly snaps

into place. To remove the belt

clip, press on it and pull it from

the opening.

Operating Elements

59

3 Operating Elements

The buttons in this operating manual are subsequently depicted

with a uniform contour. Therefore, slight deviations in the appear-

ance of the symbols on the telephone buttons compared to those

depicted here are possible.

Handset

1 Connection socket, headset

2 Display

3 Volume +

4 Menu / Key lock /

On/Off

5 Channel search / Monitor

6 Increase setting

7 Decrease setting

8 Transmit ringing tones

9 PTT button

10 Volume −

11 LED, ready to

operate indicator

Display

1 Battery charge capacity

2 Send / Receive

3 Key lock

4 Channel search

5 Confirmation signal

6 CTCSS code

7 VOX mode

8 Channel

1

2

3

4

5

6

7

8

9

10

11

1 2345

678

32

33

34

Operating the Walkie−Talkies

60

4 Operating the Walkie−Talkies

Display and notation of operating sequences

P Press the button displayed

a, P Press and hold the button displayed

b, P Release the button displayed

[

y ] Display indicator

ð Speak into the microphone

Switching the walkie−talkie on/off

a M Switch the walkie−talkie on

An acoustic signal is issued. The current channel setting

appears in the display.

a M Switch the walkie−talkie off

Volume control

V Increase (+) or decrease (−) the

volume

Transmitting and receiving

Transmitting

After pressing the P button, the Ready LED lights up.

If the P button is pressed longer than 60 seconds, a warning si-

gnal is issued. Transmission is interrupted.

a, P, ð Transmit

Hold the walkie−talkie approx. 5 to 7 cm from your mouth

and speak at a normal volume. In order to talk to other sub-

scribers, the respective walkie−talkies must be set to the

same channel and CTCSS code.

Receiving

b, P Receive

Radio signals cannot be received when the P button

is being pressed.

Operating the Walkie−Talkies

61

Selecting a channel

; or : Select a channel

Channel Frequency (MHz) Channel Frequency (MHz)

1 446.00625 5 446.05625

2 446.01875 6 446.06875

3 446.03125 7 446.08125

4 446.04375 8 446.09375

Selecting the CTCSS code

All the calls on walkie−talkies which occur within the range of recep-

tion are signalled. A condition for this is that all the walkie−talkies

are set to the same channel. To prevent mutual interference, a

CTCSS code can be defined for the set channel. 38 CTCSS codes

can be set per channel.

M Activate Settings mode

: or ; , P Select the CTCSS code and confirm

it

Each CTCSS code complies to a specific tone frequency

transmitted by the walkie−talkie. Communication between

the subscribers is only then possible when both parties

are using the same channel and CTCSS code. An excep-

tion is CTCSS code 0". In the case of this setting, all the

calls on the set channel can be heard regardless of the

CTCSS code. To be able to participate in the radio com-

munication, it may be necessary to switch from CTCSS

code 0" to the CTCSS code being used.

If you want to communicate with the walkie−talkies which are not

using a CTCSS, you must select CTCSS code 0" on your walkie−

talkie.

1

CTCSS: Continous Tone Coded Squelch System

35

36

Operating the Walkie−Talkies

62

Searching for a channel

Signals are searched for in the eight channels in a continuous cy-

cle. The

icon appears in the display. If an active channel is de-

tected, the channel search stops. The Ready LED flashes once per

second. Press the P button to enable radio communication. If

the P button is not pressed, channel search resumes after five

seconds.

Start / End channel search

N Start/End the search for a channel

Resuming search for a channel

: Continue the search for a channel

Excluding a channel

If a channel found during the channel search process should not be

considered for subsequent use, it can be excluded. All the channels

are taken into consideration again when a new channel search is

started.

a, ; The channel is excluded and the

channel search automatically

resumed

The channel set at the beginning of a channel search

cannot be excluded.

Defining a group of channels

It is possible to define a group for the channel search. Scroll

through all the channels and define whether the individual channel

should be considered in the channel search or not.

6 x M Activate Setting mode

: [

y ], P Add the channel and confirm it

The channels set to y" are taken into account during the

channel search, this set to −" are excluded. Set every

channel to −" in order to include all the channels again.

37

38

Operating the Walkie−Talkies

63

Transmit ringing tone

The ringing tones indicate to other subscribers that you want to talk

to them. A condition for this is that the other subscribers are using

the same channel and CTCSS code.

T Send ringing tones

Selecting/Deactivating the ringing tone

There are 10 ringing tones available for selection. To deactivate the

ringing tone, select the setting 0".

2 x M Activate Setting mode

: or ; , P Select the ringing tone and confirm it

Monitor

The Monitor function enables the search for weak signals on the

channel currently set. If you receive an external signal, switch to a

free channel. Always communicate with other subscribers on a free

channel to prevent interference.

a, N Monitor the channel

b, N End the monitoring function

Key lock

The key lock function prevents inadvertent modification of settings.

When the key lock function is activated, the icon appears in

the display.

Activating

8 x M Activate Setting mode

: [ y ], P Activate the key lock

Deactivating

a, M Deactivate the key lock

39

40

Operating the Walkie−Talkies

64

Confirmation signal

The confirmation signal is issued on releasing the P button.

This signals to the caller that you have ended transmission.

Activating/Deactivating the confirmation signal

Switch the walkie−talkie off. Press and hold the : button and,

while doing so, switch the walkie−talkie on again.

If the confirmation signal is activated, the icon appears in the

display.

Headset

You can use the headset enclosed with the equipment to be able to

work faster, for example. Clip the walkie−talkie on the belt so that

you have both hands free. Since the headset supplied is equipped

with an additional PTT button, you can transmit simply by using the

PTT button on the headset.

Automatic deactivation

The walkie−talkies can be set up so that they are automatically swit-

ched off after a certain time. It can be set to 30, 60 or 90 minutes.

The function is deactivated when the 0" setting is selected.

4 x M Activate Setting mode

: or ; , P Select the time and confirm it

Stopwatch

The walkie−talkies can be used as stopwatches.

5 x M Activate the stopwatch function

: Start / Stop / Resume

; Reset

Operating the Walkie−Talkies

65

VOX / iVOX (handsfree)

When this function is active, the walkie−talkie automatically starts to

transmit when the unit detects your voice or a sound.

When you start to speak, there is a slight delay before the

walkie−talkie starts to transmit.

Activate VOX mode

When using VOX

1

mode, conversation is carried out via a headset.

The P button on the walkie−talkie need not be pressed to trans-

mit.

Use a commercially available headset

without a PTT button equipped with a

3−pin, 2.5 mm stereo jack plug.

Pin assignment: 1 = Microphone,

2 = Loudspeaker, 3 = Earth

Switch the walkie−talkie off before connecting a headset.

The headset supplied with the walkie−talkie is not desi-

gned for this function because it is equipped with a PTT

button. Further information is provided on Page 64.

1. Switch the walkie−talkie off.

2. Raise the cover on the connection socket.

3. Insert the plug on the headset in the connection socket.

4. Switch the walkie−talkie on.

5. VOX" appears in the display.

Deactivating VOX mode

To deactivate VOX mode, pull the headset plug out of the connec-

tion socket.

1

VOX: Voice Operated Transmission = Noise detection

1

2

3

Operating the Walkie−Talkies

66

Activating iVOX mode

When using iVOX

1

mode, conversation is carried out via the walkie−

talkie. The P button on the walkie−talkie need not be pressed to

transmit.

1. Switch the walkie−talkie off.

2. Press and hold the P button and, while doing so, switch the

walkie−talkie on again.

3. iVOX" appears in the display.

Deactivating iVOX mode

In order to deactivate iVOX mode, switch the walkie−talkie off and

on again.

Selecting VOX / iVOX sensitivity

There are three sensitivity levels available for operation in VOX /

iVOX mode and can be selected according to the ambient noise.

Level 1 Level 2 Level 3

High ambient noise Normal ambient noise Low ambient noise

3 x M Activate Setting mode

: or ; , P Select the sensitivity level and

confirm it

1

iVOX: Intelligent Voice Operated Transmission = Noise detec-

tion

In Case of Problems

67

5 In Case of Problems

Should problems arise with the walkie−talkies, please refer to the

following information first. In the case of claims under the terms of

guarantee, contact your sales outlet. There is a 2 year period of

guarantee.

Problems and solutions

Problems Solutions

Equipment does

not function

− Battery pack has not been charged

− Key lock has been activated

Transmission not

possible

− Press P in fully to transmit

− Channel is being used by other

subscribers

No reception − Release P

− Volume setting is too low

− You are outside the range of reception,

change your position

− Obstructions such as trees and buil-

dings impair the range

− CTCSS code set is not identical to that

of the other party

− Channel is being used by other

subscribers

Technical Properties

68

6 Technical Properties

Technical data

Feature Value

Output power 0.5 W

Range Approx. 8 km in open space

Battery pack NiMh 3.6V, 600mAh

Declaration of Conformity

This device fulfils the requirements stipulated in the EU

directive:

1999/5/EU directive on radio equipment and telecom-

munications terminal equipment and the mutual recogni-

tion of their conformity. Conformity with the above men-

tioned directive is confirmed by the CE symbol on the

device.

Maintenance / Guarantee

69

7 Maintenance / Guarantee

Maintenance

 Clean the housing surfaces with a soft, fluff−free cloth.

 Never use cleaning agents or solvents.

Guarantee

SWITEL equipment is produced and tested according to the latest

production methods. Carefully selected materials and highly develo-

ped technology ensure perfect functioning and a long service life.

The terms of guarantee do not apply where the cause of equipment

malfunction is the fault of the telephone network operator or any in-

terposed private branch extension system. The terms of guarantee

do not apply to the batteries or power packs used in the products.

The period of guarantee is 24 months from the date of purchase.

All deficiencies related to material or manufacturing errors within the

period of guarantee will be redressed free of charge. Rights to

claims under the terms of guarantee are annulled following tampe-

ring by the purchaser or third parties. Damage caused as the result

of improper handling or operation, normal wear and tear, incorrect

positioning or storage, improper connection or installation or Acts of

God and other external influences are excluded from the terms of

guarantee. In the case of complaints, we reserve the right to repair

defect parts, replace them or replace the entire device. Replaced

parts or devices become our property. Claims for damages are exc-

luded except in cases of intent or gross negligence on the part of

the manufacturer.

If your device does show signs of a defect within the period of gua-

rantee, please contact the sales outlet where you purchased the

SWITEL device, producing the purchase receipt as evidence. All

claims under the terms of guarantee in accordance with this agree-

ment can only be asserted at the sales outlet. No claims under the

terms of guarantee can be asserted after a period of two years from

the date of purchase and hand−over of the product.

Index

70

8 Index

A

Ambient noise, 66

Automatic deactivation, 64

B

Belt clip, 58

C

Charge, 58

Charging, 58

Confirmation signal, 64

CTCSS code, 61

D

Declaration of Conformity, 68

Display, 59

G

Guarantee, 69

H

Headset, 64

I

Insert, 57

iVOX (handsfree), 65

K

Key lock, 63

M

Maintenance , 69

Monitor, 63

N

Notation, 60

O

Operating elements, 59

Operation, 60

P

Package contents, 57

Pin assignment, 65

Q

Questions, 67

R

Receiving, 60

Ringing tone, 63

S

Safety information, 55

Searching for a channel, 62

Selecting a channel, 61

Starting up, 57

Stopwatch, 64

Switching off, 60

Switching on, 60

T

Technical data, 68

Transmitting, 60

Troubleshooting, 67

V

Volume control, 60

VOX (handsfree), 65

Page is loading ...

41

Declaration of conformity

WE TELGO AG

OF Route d’Englisberg 17

CH−1763 Granges−Paccot

Declare under our own responsibility that the product

MODEL: WTF712

DESCRIPTION: Portable Mobile Radio

frequency 446 MHz

Is in conformity with directives: R&TTE Directive (1999/5/EC)

COMPLIANCE IS ACHIEVED BY CONFORMITY TO THE FOLLOWING:

EN 300 296−1 V1.1.1 (2001−03)

EN 300 296−2 V1.1.1 (2001−03)

TEST REPORT NUMBERS:

0605116

AUTHORISED BY:

________________________

Signed:

Name (printed): Selim Dusi

Position in company: Managing Director

Date of issue: 28.03.2006

Copies of this document will be held on file for a period of 10 years after

the last production.

0979

Supplier: TELGO AG, Route d’Englisberg 17

CH−1763 Granges−Paccot

Product: WTF712

This product transmits in a non−EU−harmonised frequency band (446MHz)

and may thus only be used within those countries that permit usage of such

equipment.

SWITEL WTE014 Owner's manual

This manual is also suitable for

SWITEL WTE014 Owner's manual

in other languages

Related papers

Other documents