SWITEL WTE014 Owner's manual

Category
Two-way radios
Type
Owner's manual

This manual is also suitable for

2
Bedienungsanleitung 3. . . . . . . . . . .
Mode d’emploi 20. . . . . . . . . . . . . .
Istruzioni per l’uso 37. . . . . . . . . . . .
Operating Instructions 54. . . . . . . . .
Declaration of Conformity 72. . . . . . .
31
Contents
54
1 Safety Information 55. . . . . . . . . . . . . . .
2 Preparing the Walkie−Talkies for Use 57. .
3 Operating Elements 59. . . . . . . . . . . . . .
4 Operating the Walkie−Talkies 60. . . . . . .
5 In Case of Problems 67. . . . . . . . . . . . .
6 Technical Properties 68. . . . . . . . . . . . .
7 Maintenance / Guarantee 69. . . . . . . . . .
8 Index 70. . . . . . . . . . . . . . . . . . . . . . . .
Safety Information
55
1 Safety Information
Please read this operating instruction manual thoroughly.
Intended use
These walkie−talkies have been conceived for communication with
other walkie−talkies complying to the same standards. Any other
use is considered unintended use. Unauthorised modification or
reconstruction is not permitted. Under no circumstances open the
devices or complete any repair work yourself.
Ambient conditions
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
Do not use the walkie−talkies in potentially explosive areas.
Power supply
Caution: Only use the power adapter plug supplied
because other power supplies could damage the walkie−
talkie equipment. Ensure access to the power adapter
plug is not obstructed by furniture or such.
Rechargeable battery pack
Caution: Never throw batteries into a fire. Only use batte-
ries of the same type! Pay attention to correct polarity. In-
correct polarity of the batteries represents a risk of explo-
sion during charging.
Medical equipment
Caution: Never use the walkie−talkies in the vicinity of me-
dical equipment. Effects on such equipment cannot be
fully ruled out. Walkie−talkies can cause an unpleasant
humming sound in hearing aids.
Safety Information
56
Disposal
You are obliged to dispose of consumable goods accord-
ing to legal requirements. The adjacent symbol indicates
that electrical and electronic apparatus and batteries no
longer required must be disposed of separate from domes-
tic waste.
Electrical and electronic devices must be disposed of
at suitable collection points provided by the public waste
authorities.
Batteries must be disposed of at the point of sale or at
appropriate collection points provided by the public waste
authorities.
Packaging materials must be disposed of according to
local regulations.
Preparing the Walkie−Talkies for Use
57
2 Preparing the Walkie−Talkies for Use
Safety information
Caution: It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
two walkie−talkies with belt clip two rechargeable battery
packs
two headsets a power adapter plug
an operating manual
Inserting the battery packs
Open the battery compartment cover. Insert the battery pack sup-
plied. Pay attention to correct polarity. Close the battery compart-
ment cover.
Caution: Standard battery packs or batteries are not char-
ged. Only use the battery packs supplied or ones of the
same type.
Preparing the Walkie−Talkies for Use
58
Charging the battery pack
Connect the walkie−talkies as illustrated in the diagram. For safety
reasons, only use the power adapter plug supplied.
Mains power outlet
Before using the walkie−talkies for the first time, charge them for at
least 14 hours. When the walkie−talkies are connected correctly, the
red LEDs light up. The LEDs only signal that the connection is cor-
rect and continue to light up even when the battery packs are fully
charged.
Do not charge the walkie−talkies with charging units from
other manufacturers.
The current battery charge status is indicated in the display:
Full Half empty Low Empty
As soon as the indicator flashes in the display and acou-
stic warning signals are issued, the battery pack needs to
be recharged.
Attaching the belt clip
Insert the belt clip in the opening
provided until it audibly snaps
into place. To remove the belt
clip, press on it and pull it from
the opening.
Operating Elements
59
3 Operating Elements
The buttons in this operating manual are subsequently depicted
with a uniform contour. Therefore, slight deviations in the appear-
ance of the symbols on the telephone buttons compared to those
depicted here are possible.
Handset
1 Connection socket, headset
2 Display
3 Volume +
4 Menu / Key lock /
On/Off
5 Channel search / Monitor
6 Increase setting
7 Decrease setting
8 Transmit ringing tones
9 PTT button
10 Volume −
11 LED, ready to
operate indicator
Display
1 Battery charge capacity
2 Send / Receive
3 Key lock
4 Channel search
5 Confirmation signal
6 CTCSS code
7 VOX mode
8 Channel
1
2
3
4
5
6
7
8
9
10
11
1 2345
678
32
33
34
Operating the Walkie−Talkies
60
4 Operating the Walkie−Talkies
Display and notation of operating sequences
P Press the button displayed
a, P Press and hold the button displayed
b, P Release the button displayed
[
y ] Display indicator
ð Speak into the microphone
Switching the walkie−talkie on/off
a M Switch the walkie−talkie on
An acoustic signal is issued. The current channel setting
appears in the display.
a M Switch the walkie−talkie off
Volume control
V Increase (+) or decrease (−) the
volume
Transmitting and receiving
Transmitting
After pressing the P button, the Ready LED lights up.
If the P button is pressed longer than 60 seconds, a warning si-
gnal is issued. Transmission is interrupted.
a, P, ð Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel and CTCSS code.
Receiving
b, P Receive
Radio signals cannot be received when the P button
is being pressed.
Operating the Walkie−Talkies
61
Selecting a channel
; or : Select a channel
Channel Frequency (MHz) Channel Frequency (MHz)
1 446.00625 5 446.05625
2 446.01875 6 446.06875
3 446.03125 7 446.08125
4 446.04375 8 446.09375
Selecting the CTCSS code
All the calls on walkie−talkies which occur within the range of recep-
tion are signalled. A condition for this is that all the walkie−talkies
are set to the same channel. To prevent mutual interference, a
CTCSS code can be defined for the set channel. 38 CTCSS codes
can be set per channel.
M Activate Settings mode
: or ; , P Select the CTCSS code and confirm
it
Each CTCSS code complies to a specific tone frequency
transmitted by the walkie−talkie. Communication between
the subscribers is only then possible when both parties
are using the same channel and CTCSS code. An excep-
tion is CTCSS code 0". In the case of this setting, all the
calls on the set channel can be heard regardless of the
CTCSS code. To be able to participate in the radio com-
munication, it may be necessary to switch from CTCSS
code 0" to the CTCSS code being used.
If you want to communicate with the walkie−talkies which are not
using a CTCSS, you must select CTCSS code 0" on your walkie−
talkie.
1
CTCSS: Continous Tone Coded Squelch System
35
36
Operating the Walkie−Talkies
62
Searching for a channel
Signals are searched for in the eight channels in a continuous cy-
cle. The
icon appears in the display. If an active channel is de-
tected, the channel search stops. The Ready LED flashes once per
second. Press the P button to enable radio communication. If
the P button is not pressed, channel search resumes after five
seconds.
Start / End channel search
N Start/End the search for a channel
Resuming search for a channel
: Continue the search for a channel
Excluding a channel
If a channel found during the channel search process should not be
considered for subsequent use, it can be excluded. All the channels
are taken into consideration again when a new channel search is
started.
a, ; The channel is excluded and the
channel search automatically
resumed
The channel set at the beginning of a channel search
cannot be excluded.
Defining a group of channels
It is possible to define a group for the channel search. Scroll
through all the channels and define whether the individual channel
should be considered in the channel search or not.
6 x M Activate Setting mode
: [
y ], P Add the channel and confirm it
The channels set to y" are taken into account during the
channel search, this set to −" are excluded. Set every
channel to −" in order to include all the channels again.
37
38
Operating the Walkie−Talkies
63
Transmit ringing tone
The ringing tones indicate to other subscribers that you want to talk
to them. A condition for this is that the other subscribers are using
the same channel and CTCSS code.
T Send ringing tones
Selecting/Deactivating the ringing tone
There are 10 ringing tones available for selection. To deactivate the
ringing tone, select the setting 0".
2 x M Activate Setting mode
: or ; , P Select the ringing tone and confirm it
Monitor
The Monitor function enables the search for weak signals on the
channel currently set. If you receive an external signal, switch to a
free channel. Always communicate with other subscribers on a free
channel to prevent interference.
a, N Monitor the channel
b, N End the monitoring function
Key lock
The key lock function prevents inadvertent modification of settings.
When the key lock function is activated, the icon appears in
the display.
Activating
8 x M Activate Setting mode
: [ y ], P Activate the key lock
Deactivating
a, M Deactivate the key lock
39
40
Operating the Walkie−Talkies
64
Confirmation signal
The confirmation signal is issued on releasing the P button.
This signals to the caller that you have ended transmission.
Activating/Deactivating the confirmation signal
Switch the walkie−talkie off. Press and hold the : button and,
while doing so, switch the walkie−talkie on again.
If the confirmation signal is activated, the icon appears in the
display.
Headset
You can use the headset enclosed with the equipment to be able to
work faster, for example. Clip the walkie−talkie on the belt so that
you have both hands free. Since the headset supplied is equipped
with an additional PTT button, you can transmit simply by using the
PTT button on the headset.
Automatic deactivation
The walkie−talkies can be set up so that they are automatically swit-
ched off after a certain time. It can be set to 30, 60 or 90 minutes.
The function is deactivated when the 0" setting is selected.
4 x M Activate Setting mode
: or ; , P Select the time and confirm it
Stopwatch
The walkie−talkies can be used as stopwatches.
5 x M Activate the stopwatch function
: Start / Stop / Resume
; Reset
Operating the Walkie−Talkies
65
VOX / iVOX (handsfree)
When this function is active, the walkie−talkie automatically starts to
transmit when the unit detects your voice or a sound.
When you start to speak, there is a slight delay before the
walkie−talkie starts to transmit.
Activate VOX mode
When using VOX
1
mode, conversation is carried out via a headset.
The P button on the walkie−talkie need not be pressed to trans-
mit.
Use a commercially available headset
without a PTT button equipped with a
3−pin, 2.5 mm stereo jack plug.
Pin assignment: 1 = Microphone,
2 = Loudspeaker, 3 = Earth
Switch the walkie−talkie off before connecting a headset.
The headset supplied with the walkie−talkie is not desi-
gned for this function because it is equipped with a PTT
button. Further information is provided on Page 64.
1. Switch the walkie−talkie off.
2. Raise the cover on the connection socket.
3. Insert the plug on the headset in the connection socket.
4. Switch the walkie−talkie on.
5. VOX" appears in the display.
Deactivating VOX mode
To deactivate VOX mode, pull the headset plug out of the connec-
tion socket.
1
VOX: Voice Operated Transmission = Noise detection
1
2
3
Operating the Walkie−Talkies
66
Activating iVOX mode
When using iVOX
1
mode, conversation is carried out via the walkie−
talkie. The P button on the walkie−talkie need not be pressed to
transmit.
1. Switch the walkie−talkie off.
2. Press and hold the P button and, while doing so, switch the
walkie−talkie on again.
3. iVOX" appears in the display.
Deactivating iVOX mode
In order to deactivate iVOX mode, switch the walkie−talkie off and
on again.
Selecting VOX / iVOX sensitivity
There are three sensitivity levels available for operation in VOX /
iVOX mode and can be selected according to the ambient noise.
Level 1 Level 2 Level 3
High ambient noise Normal ambient noise Low ambient noise
3 x M Activate Setting mode
: or ; , P Select the sensitivity level and
confirm it
1
iVOX: Intelligent Voice Operated Transmission = Noise detec-
tion
In Case of Problems
67
5 In Case of Problems
Should problems arise with the walkie−talkies, please refer to the
following information first. In the case of claims under the terms of
guarantee, contact your sales outlet. There is a 2 year period of
guarantee.
Problems and solutions
Problems Solutions
Equipment does
not function
Battery pack has not been charged
Key lock has been activated
Transmission not
possible
Press P in fully to transmit
Channel is being used by other
subscribers
No reception Release P
Volume setting is too low
You are outside the range of reception,
change your position
Obstructions such as trees and buil-
dings impair the range
CTCSS code set is not identical to that
of the other party
Channel is being used by other
subscribers
Technical Properties
68
6 Technical Properties
Technical data
Feature Value
Output power 0.5 W
Range Approx. 8 km in open space
Battery pack NiMh 3.6V, 600mAh
Declaration of Conformity
This device fulfils the requirements stipulated in the EU
directive:
1999/5/EU directive on radio equipment and telecom-
munications terminal equipment and the mutual recogni-
tion of their conformity. Conformity with the above men-
tioned directive is confirmed by the CE symbol on the
device.
Maintenance / Guarantee
69
7 Maintenance / Guarantee
Maintenance
Clean the housing surfaces with a soft, fluff−free cloth.
Never use cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest
production methods. Carefully selected materials and highly develo-
ped technology ensure perfect functioning and a long service life.
The terms of guarantee do not apply where the cause of equipment
malfunction is the fault of the telephone network operator or any in-
terposed private branch extension system. The terms of guarantee
do not apply to the batteries or power packs used in the products.
The period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the
period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tampe-
ring by the purchaser or third parties. Damage caused as the result
of improper handling or operation, normal wear and tear, incorrect
positioning or storage, improper connection or installation or Acts of
God and other external influences are excluded from the terms of
guarantee. In the case of complaints, we reserve the right to repair
defect parts, replace them or replace the entire device. Replaced
parts or devices become our property. Claims for damages are exc-
luded except in cases of intent or gross negligence on the part of
the manufacturer.
If your device does show signs of a defect within the period of gua-
rantee, please contact the sales outlet where you purchased the
SWITEL device, producing the purchase receipt as evidence. All
claims under the terms of guarantee in accordance with this agree-
ment can only be asserted at the sales outlet. No claims under the
terms of guarantee can be asserted after a period of two years from
the date of purchase and hand−over of the product.
Index
70
8 Index
A
Ambient noise, 66
Automatic deactivation, 64
B
Belt clip, 58
C
Charge, 58
Charging, 58
Confirmation signal, 64
CTCSS code, 61
D
Declaration of Conformity, 68
Display, 59
G
Guarantee, 69
H
Headset, 64
I
Insert, 57
iVOX (handsfree), 65
K
Key lock, 63
M
Maintenance , 69
Monitor, 63
N
Notation, 60
O
Operating elements, 59
Operation, 60
P
Package contents, 57
Pin assignment, 65
Q
Questions, 67
R
Receiving, 60
Ringing tone, 63
S
Safety information, 55
Searching for a channel, 62
Selecting a channel, 61
Starting up, 57
Stopwatch, 64
Switching off, 60
Switching on, 60
T
Technical data, 68
Transmitting, 60
Troubleshooting, 67
V
Volume control, 60
VOX (handsfree), 65
41
Declaration of conformity
WE TELGO AG
OF Route d’Englisberg 17
CH−1763 Granges−Paccot
Declare under our own responsibility that the product
MODEL: WTF712
DESCRIPTION: Portable Mobile Radio
frequency 446 MHz
Is in conformity with directives: R&TTE Directive (1999/5/EC)
COMPLIANCE IS ACHIEVED BY CONFORMITY TO THE FOLLOWING:
EN 300 296−1 V1.1.1 (2001−03)
EN 300 296−2 V1.1.1 (2001−03)
TEST REPORT NUMBERS:
0605116
AUTHORISED BY:
________________________
Signed:
Name (printed): Selim Dusi
Position in company: Managing Director
Date of issue: 28.03.2006
Copies of this document will be held on file for a period of 10 years after
the last production.
0979
Supplier: TELGO AG, Route d’Englisberg 17
CH−1763 Granges−Paccot
Product: WTF712
This product transmits in a non−EU−harmonised frequency band (446MHz)
and may thus only be used within those countries that permit usage of such
equipment.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

SWITEL WTE014 Owner's manual

Category
Two-way radios
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI