ADTRAN HTU-C M User manual

ADTRAN
Brand
ADTRAN
Model
HTU-C M
Type
User manual

This manual is also suitable for

ADTRAN HTU-C M is a versatile device designed to provide reliable and efficient data transmission over existing copper infrastructure. With its advanced features, it enables businesses and organizations to extend the reach of their networks and deliver high-speed connectivity where fiber optic cables may not be feasible or cost-effective.

Key capabilities of the ADTRAN HTU-C M include:

  1. High-Speed Data Transmission: The HTU-C M supports data rates of up to 1.544 Mbps, making it suitable for a wide range of applications, including video conferencing, data transfer, and internet access.

  2. Long Reach: The device can transmit data over distances of up to 9,000 feet (2.7 km) on 26-AWG copper cables and up to 12,000 feet (3.6 km) on 24-AWG copper cables, enabling connectivity even in remote or underserved areas.

ADTRAN HTU-C M is a versatile device designed to provide reliable and efficient data transmission over existing copper infrastructure. With its advanced features, it enables businesses and organizations to extend the reach of their networks and deliver high-speed connectivity where fiber optic cables may not be feasible or cost-effective.

Key capabilities of the ADTRAN HTU-C M include:

  1. High-Speed Data Transmission: The HTU-C M supports data rates of up to 1.544 Mbps, making it suitable for a wide range of applications, including video conferencing, data transfer, and internet access.

  2. Long Reach: The device can transmit data over distances of up to 9,000 feet (2.7 km) on 26-AWG copper cables and up to 12,000 feet (3.6 km) on 24-AWG copper cables, enabling connectivity even in remote or underserved areas.

1Section 61245001L2-13, Issue 161245.001L2-13A
1WS
1-1WStuoemiTkcabpooL
delbanE
delbasiD
.)setunim02(delbanesituoemitkcabpool,NEta1-1WShtiW
3,2
.delbasidsituoemitkcabpool,SIDta1-1WShtiW
2-1WSkcabpooLUIN
delbanE
delbasiD
1TlanoitidartotdnopserotmetsysLSDHNARTDAehtsmargorP
.sedocnwod-pooldnapu-pool)UIN(tinuecafretnikrowten
3-1WStceleSemarFlaunaM
FS
FSE
noitcelesemarF
.detcelessitamrofemarfrepus,FSta3-1WShtiW
.detcelessitamrofemarfrepusdednetxe,FSEta-31WShtiW
4-1WSgnimarF1T
demarfnU
demarF
edomgnimarf1TehtstceleS
3-1WS.detcelessinoitarepodemarfnu,MRFUta4-1WShtiW
.derongisignittes
.detcelessinoitarepodemarf,MRFta4-1WShtiW
5-1WStceleSedoClaunaM
IMA
SZ8B
.sedocnoitutitsbusorez8yranibronoisrevnikrametanretlastceleS
.detcelessinoisrevnikrametanretla,IMAta5-1WShtiW
.detcelessinoitutitsbusorez8yranib,SZ8Bta5-1WShtiW
R-UTH
noitcnuFnoitpircseD
MERkcabpooLetomeRC-C M
is not
in loopback UTHehtfI ssing REM
activates
theerp,
k towards the customer. If the HTU-C M
is
in loopback,
cabpool
COLkcabpooLlacoLR-UTHehtfI
tonsi
MERgnisserp,kcabpoolni
setavitca
eht
k towards the customer. If the HTU-R
is
in loopback,cabpool
pressing REM
deactivates
the loopback.
pressing REM
deactivates
the loopback.
Please ensure you are properly grounded before setting any function switches.
HDSL Quick Start Guide
5th Gen HTU-C M, P/N 1245001L2
5th Gen HTU-R, P/N 1245021L1
PRACTICES
Switch Option Settings
(arrows indicate default settings)
HTU-C M
The HTU-C M transfers the local configuration to the HTU-R when circuit synchronization is
achieved. The HTU-R then sets its configuration to match the HTU-C M.
Rotary Switch
Used to select operation of the line build-out equalizer in series with the DSX-1 output.
1
If external line build-out is selected, the signal transmitted by the HTU-C M is a 12V p-p signal. This must be
considered when measuring the signal at the DSX EQ faceplate Bantam jack. The signal may appear hotter
than it should be.
2
Loopback timeout must be selected prior to initiating a loopback.
3
60 and 120 minutes is selectable from the craft interface.
noitcnuFnoitpircseD
TXE
0
331
662
993
335
tuo-dliubenillanretxestceleS
1
elbacMABAfoteef331-0morfhtgneleniL
elbacMABAfoteef662-331morfhtgneleniL
elbacMABAfoteef993-662morfhtgneleniL
elbacMABAfoteef335-993morfhtgneleniL
elbacMABAfoteef556-335morfhtgneleniL
HTU-R
1245021L2
LP1
LP2
DS1
ALM
SF
AMI
LBK
ESF
B8ZS
MON
L
O
C
R
E
M
LBK
TX
RX
(GRN)
(GRN)
(YEL)
(YEL)
HTU-C
1245001L2
TX
RX
LP1
LP2
DS1
ALM
LBK
R
S
2
3
2
B8ZS
FRM
ESF
NIU LB DIS
LBK TIMEOUT DIS
AMI
UFRM
SF
EN
EN
E
Q
DSX-1
LBO
533
399
266
133
0
EXT
Line Build-Out
Rotary Switch
SW1
H
D
S
L
2 Section 61245001L2-13, Issue 1 61245.001L2-13A
ADTRAN PRACTICES 5
th
Gen HTU-C/HTU-R Quick Start guide
HDSL DEPLOYMENT GUIDELINES
The ADTRAN HDSL system is designed to provide DS1
based services over loops designed to comply with
Carrier Service Area (CSA) guidelines. CSA deployment
guidelines are given below.
1. All loops are non-loaded only.
2. For loops with 26-AWG cable, the maximum
loop length including bridged tap lengths is 9kft.
3. For loops with 24-AWG cable, the maximum
loop length including bridged tap lengths is
12kft.
4. Any single bridged tap is limited to 2kft.
5. Total bridged tap length is limited to 2.5kft.
6. The total lenght of multi-gauge cable containing
26-AWG cable must not exceed:
12 -{(3*L
26
)/9} - L
BTAP
(in kft)
L
26
= Total length of 26-AWG cable excluding
bridged taps (in kft)
L
BTAP
= Total length of all bridged taps (in kft)
This deployment criteria is summarized in the chart
shown.
Recommended maximum local loop loss information for
PIC cable at 70°F, 135Ω, resistive termination is listed in
the provided table.
An approximation for maximum amount of wideband
nosie on a DSL local loop as measured by a 50kbps filter
is < 31dBrn.
An approximation for maximum amount of impulse noise
on a DSL local loop as measured by a 50kbps filter is < 50dBrn.
These approximations are to be used as
guidelines only and may vary slightly on different
loops. Adhering to the guidelines should produce
performance in excess of 10
-7
BER.
0
12
11
10
9
8
7
6
5
4
3
2
1
0
1234
WORKING LENGTH OF 26 GAUGE CABLE (KFT)
WORKING LENGTH OF 24 GAUGE (OR COARSER) CABLE (KFT)
56789
2.5
INVALID HDSL CABLE LENGTHS
2.0
1.5
1.0
0.5
0.0
TOTAL
BRIDGED
TAP
LENGTH
(KFT)
VALID HDSL CABLE LENGTHS
Loop Insertion Loss
)zH(ycneuqerF)Bd(ssoLmumixaM
0003
000,01
000,05
000,001
000,051
000,002
0.21
0.51
5.52
0.03
57.23
52.53
ADTRAN Technical Support (800) 726-8663
Standard support hours, Monday-Friday, 7am-7pm CST
Emergency Support 7 days/week, 24 hours/day
When deployment requires the use of two HREs, the
HTU-C M can be deployed with two Low Voltage T400
HREs (1244.041L2) and one Low Voltage HTU-R
(1245.021L1 or 1245.026L1).
  • Page 1 1
  • Page 2 2

ADTRAN HTU-C M User manual

ADTRAN
Brand
ADTRAN
Model
HTU-C M
Type
User manual
This manual is also suitable for

ADTRAN HTU-C M is a versatile device designed to provide reliable and efficient data transmission over existing copper infrastructure. With its advanced features, it enables businesses and organizations to extend the reach of their networks and deliver high-speed connectivity where fiber optic cables may not be feasible or cost-effective.

Key capabilities of the ADTRAN HTU-C M include:

  1. High-Speed Data Transmission: The HTU-C M supports data rates of up to 1.544 Mbps, making it suitable for a wide range of applications, including video conferencing, data transfer, and internet access.

  2. Long Reach: The device can transmit data over distances of up to 9,000 feet (2.7 km) on 26-AWG copper cables and up to 12,000 feet (3.6 km) on 24-AWG copper cables, enabling connectivity even in remote or underserved areas.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents