Detachable phone armband
TLL191031
User guide
This manual is available in more languages
at www.tellur.com
Specifications
• Material: PC, Silicone
• Compatibility: 4" - 6.5"
• Detachable design: Yes
• Characteristics: Easy to Install &
Uninstall, 360° rotatable design
• Weight: 70g
• Color: Black
Installation instructions
1.Put on the armband and adjust the strap
for a comfortable wear.
2.Align your phone with the silicone
holder (it can fit phones between 4”
and 7”.
3.Fit your phone into the silicone holder
and adjust it in order to have unhindered
access to all controls and buttons.
4.When mounting the silicone holder on
the armband’s base, make sure you align
the raised, circular joint from the back of
the holder with the concave position of the
armband’s base.
5.Keeping the phone silicone holder
perpendicular to the armband, press it
hard downward by 2mm and rotate the
phone counterclockwise by 90°, then
release.
6.After fixing the silicone phone holder to
the armband’s base, you can rotate and
position your phone into any angle you
want.
Note! Do not press the phone downward
while rotating its position.
Removal instructions
To remove the holder from the armband’s
base, press the phone silicone holder
hard downward and rotate clockwise by
90°.
Descriere Produs: Suport detasabil de telefon 4"-6.5" pentru brat A100, negru
Marca: Tellur
Cod produs: TLL191031
RoHS – 2011/65/EU
Standarde aplicate:
IEC62321:2013 Ed 1.0
IEC62321:2008 Ed 1.0
Produsul are marca aplicata in 2020
Declaratie de conformitate
Bucuresti, 11-05-2020
/
