Bicycle phone holder
TLL193001
User guide
This manual is available in more languages
at www.tellur.com
Specifications
• Material: PC, Silicone
• Compatibility: 4" - 6.5"
• Detachable design: Yes
• Characteristics: Easy to Install &
Uninstall, 360° rotation
Installing the stand
1.Fix your smartphone and adjust the
rubber bands in order to have unhindered
access to all buttons and functionalities
(e.g. face recognition).
2.Insert the strap through the knob and
screw the nut until the stand stays fixed
on the handlebar, without wobbling.
Detaching the phone from the stand
1.Hold the cellphone in the center and
push downward about 2mm to feel the
spring in the connector.
2.Push whilst rotating 90° clockwise or
counterclockwise to detach the rubber
holder from the stand.
2.Detached.
Locked in Press down
Mounting the phone on the stand
1.Position the cellphone over the dock in
the same place you detached it from.
2.Push downward the connector and
rotate 90° then release to lock it in.
Press down
3.This mount is 360° rotatable. Turn it
horizontally to enjoy a better navigating
view & less wobbling.
NOTE! Each time you mount the
phone to the stand, try to rotate it to
make sure it is properly locked.
Descriere Produs: Suport detasabil pentru telefon 4"-6.5"
pentru bicicleta BPH100, negru
Marca: Tellur
Cod produs: TLL193001
RoHS – 2011/65/EU
Standarde aplicate:
IEC62321:2013 Ed 1.0
IEC62321:2008 Ed 1.0
Produsul are marca aplicata in 2020
Declaratie de conformitate
Bucuresti, 11-05-2020
/
