1
Quick Start Guide
TeleEye NX301 Video Server
This Quick Start Guide will take you through the process to install and configure TeleEye NX301 video server for remote
monitoring, recording and playback on a PC.
Installation with PoE
TeleEye NX301
210.17.139.146TeleEye SF373
Internet
Network Switch
/ Router
with
PoE supported
Straight-through
Ethernet cable
Video cable
Power cable
Step 1: Connect the video ouput of the camera to NX301 video input.
Step 2: Connect NX301 DC output to camera’s DC input. Note that the power is 12V DC, 500mA..
Step 3: Connect NX301 to network switch / router with 802.3af PoE supported.
Step 4: Wait for around 1 minutes for the NX301 to startup.
Installation without PoE
Power Adapter
TeleEye NX301
210.17.139.146
TeleEye SF373
Internet
Network Switch
/ Router
Straight-through
Ethernet cable
Video cable
Camera’s
DC Adapter
Step 1: Connect the video ouput of the camera to NX301 video input.
Step 2: Connect NX301 to a network switch / router.
Step 3: Connect NX301 to the power adaptor.
2
Step 4: Wait for around 1 minutes for the NX301 to startup.
Installation with 3G modem
Power Adapter
T
ele
Eye
N
X
301
210.17.139.146
TeleEye SF373
Internet
Video cable
Camera’s
DC Adapter
USB 3G Data Modem
USB cable
Step 1: Connect the video ouput of the camera to NX301 video input.
Step 2: Connect NX301 to an USB 3G data modem.
Step 3: Connect NX301 to the power adaptor.
Step 4: Wait for around 1 minutes for the NX301 to startup.
IP Setup Utitlity
Step 1: Install IP Setup Utility software
to a PC.
Step 2: Run IP Setup Utility software.
Step 3: From the IP setup utility, match
your own NX301 by its unique
serial number. You can change
its IP/port, etc. on the right side
of the window. Press
[Apply]
button when you finished.
3
Mobile Data Modem Setup (for Installation with 3G modem only)
Make sure your mobile service provider supports streaming at the Internet connection and you have installed
WX-M4Lite / M16.
Step 1: Execute WX-M4Lite / M16.
Step 2: Click Transmitter Setting in the menu bar
Step 3: In the Transmitter Settings window, click
Connection 3G USB Modem.
Step 4: Click “Enabled”.
Step 5: Choose Dialup mode: “SMS / Event” or “Startup”.
“SMS / Event” Recommended to users who do
not has a real IP for mobile
network connection. NX301 will
dial up to the Internet when an
event triggered a dialback action
or receive a vaild dialback SMS
message.
“Startup” This mode is only suitable for
users who has a real IP for
mobile network connection.
NX301 will dial up to the Internet
when it is powered up.
Step 6: Enter APN and Dial Number in Profile 1 or 2
according to the setting of your telecom service
provider.
Step 7: Click [Test 3G USB Modem] to test the
configuration.
Step 8: Click [Apply] to save settings.
Live Monitoring with Web-Browser
Step 1: On the PC side, open a web browser and type in the IP address of the NX301. (NX301’s IP address of this
example is 210.17.139.146, type in http://210.17.139.146 in a web browser).
Step 2: Type in the Password. (The default password is 000000).
Step 3: Wait for connecting the NX301.
Step 4
Step 5
Step 6
Step 7
Step 8
Step 3
4
Step 4: A monitoring screen will be shown on the browser.
WX-M4Lite Reception Software
Users can install WX-M4Lite reception software
from the software CD. WX-M4Lite is a back-end
application which works in conjunction with NX
network camera to build up a complete IP and
mobile surveillance system. WX-M4Lite allows:
Up to 4 cameras monitoring
Triplex operations
Digital video recording, playback and
electronic patrol
Sophisticated event management
Full screen display
WX-M4Lite is a lite version of WX-M16 which provides more comprehensive functions than WX-M4Lite. For details of the
above information, please refer to the manual of WX-M4Lite reception software.
END
Step 2’s screenshot: Type in the Password Step 4’s screenshot: web-monitoring screen
/
