2. Hill-Rom
  3. RetinaVue 700 Imager

Hill-Rom RetinaVue 700 Imager Assembly Instructions

  • Hello! I have reviewed the Assembly Instructions for the Welch Allyn RetinaVue 700 Imager Battery Charger. This document details how to assemble the charger, connect the power supply, and place the battery for charging. It also includes important warnings and cautions concerning electrical safety and proper usage. I understand the charger has LED indicators and takes around 5 hours for a full charge. I'm ready to answer any questions you have.
  • Where should the battery charger be located?
    Can I open the battery charger?
    What should I do before cleaning the battery charger?
    Can I use batteries from other sources?
1 2
3
5 h
100%
4
welchallyn.com
7d
1
2
Welch Allyn® RetinaVue® 700 Imager
Battery Charger Assembly Instructions
Mat. No. 728695, 80024084 Ver. C
Revision date: 2019-04
107144 107142
107143
+
CAUTION Use appropriate power
plug for your country.
WARNING The battery charger (non-medical electrical equipment) shall be situated outside the patient
environment (reference IEC 60601-1-1).
WARNING Electric shock hazard. Do not open the battery charger or attempt repairs. The battery
charger has no user-serviceable internal parts. Inspection and servicing of internal parts shall only be
performed by qualified service personnel.
WARNING Electric shock hazard. Before cleaning the battery charger, disconnect the AC power cord
from the mains outlet and the power source.
WARNING Do not use batteries from other sources. This may result in excessive temperatures, fire, or
explosion.
CAUTION Use appropriate power plug for your country.
CAUTION Do not modify this equipment without authorization of the manufacturer.
Welch Allyn Technical Support: www.welchallyn.com/support
©2019 Welch Allyn, Inc.
1 2
12V, 3A
100-240V
50-60 Hz
/