Marathon ST083022 User manual

Marathon
Brand
Marathon
Model
ST083022
Category
Watches
Type
User manual

This manual is also suitable for

Adanac 7000 Stopwatch
Model ST083022
User Manual
1
STOPWATCH MODE
In stopwatch mode, time is measured to the 1/100th second. The different functions can
be operated with the SPLIT/RESET and START/STOP keys.
Accumulated elapsed time measurement:
Press the START/STOP key to start.
Press the START/STOP key again to stop.
Press the START/STOP key again to restart.
Press the START/STOP key again to stop again.
Press the SPLIT/RESET key to reset the time displayed.
Split time measurement:
Press the START/STOP key to start.
Press the SPLIT/RESET key to split.
Press the SPLIT/RESET key again to split and release.
Press the START/STOP key again to stop.
Press the SPLIT/RESET key again to reset the time displayed.
Measurement between two competitors:
Press the START/STOP key to start.
Press the SPLIT/RESET key to split.
Press the START/STOP key to stop.
Press the SPLIT/RESET key to split and release.
Press the SPLIT/RESET key again to reset the time displayed.
Press the MODE key to return to the normal time mode.
ALARM SETTING MODE
An alarm time can be set on this stopwatch by following the steps below:
1. In normal time mode, press the MODE key twice to enter the alarm setting mode.
2. Press the SPLIT/RESET key to select hour or minute.
3. Press the START/STOP key to adjust the value.
4. When done, press the MODE key to return to the normal time mode.
NOTE:
When the clock reaches the alarm time, the alarm will sound.
- The alarm will stop automatically after one minute if no buttons are pressed and it will
sound again at the same time the next day.
- PresstheSTART/STOPkeytosnoozethealarm.Itwillsoundagainveminutes
later.
- Press the SPLIT/RESET key to stop the alarm. The alarm will be heard at the same
time the next day.
TIME SETTING MODE
Follow the steps below to set the time:
1. In normal time mode, press the MODE key three times to enter the time setting mode.
2. Press the SPLIT/RESET key to select the values to set. The setting sequence is:
second
minute hour date month weekday.
MAIN FEATURES
1. MODE KEY
- Press to switch between normal time mode, stopwatch mode, alarm setting mode
and time setting mode
2. SPLIT/RESET KEY
- In normal time mode, press to show the alarm time.
- In stopwatch mode, press to reset values or to show split time.
- In alarm setting mode, press to switch between hour and minute setting.
- In time setting mode, press to switch between time and date setting.
3. START/STOP KEY
- In normal time mode, press and hold to show the date.
- In stopwatch mode, press to start or stop the counting.
- In alarm or time setting mode, press to adjust the setting value.
4. LIQUID CRYSTAL DISPLAY (LCD)
5. LIGHT KEY
- In normal time mode, press and hold to show the date.
6. BATTERY DOOR
- Accommodates one lithium battery CR2032.
MODE SELECTION
This stopwatch includes four modes that can be accessed by pressing the MODE key.
The sequence is: NORMAL TIME MODE STOPWATCH MODE ALARM
SETTING MODE TIME SETTING MODE.
MODE SELECTION
The current time will be displayed in normal time mode.
Press and hold the SPLIT/RESET key to show the alarm time.
Press and hold the START/STOP key to show the month and the day.
In normal time mode, press and hold the SPLIT/RESET, then press the START/STOP
key to turn the alarm on or off.
7000
SKU# ST083022
CR2032
3V Lithium
2
4
5
1
3
6
7000
MANUAL ENGLISH
2
TIME SETTING MODE-CONTINUED
3. Press the START/STOP key to adjust the value.
4. When done, press the MODE key to return to the normal time mode.
NOTE:
- When setting the seconds, if the value is more than or equal to 30 seconds,
pressing the START/STOP key can increase it to one minute and if the value is less
than 30 seconds, pressing the START/STOP key can reset the value to “00.”
- The 12/24-hour format can be selected when setting the hour. The icon “H” on the
LCD indicates the 24-hour format, while the icon “A” (AM) or “P” (PM) represents
the 12-hour format.
HOURLY CHIME
When the hourly chime function is activated, a chime will be heard on the hour. It can be
activated or deactivated by following the steps below:
1. In normal time mode, press and hold the SPLIT/RESET key.
2. Press the MODE key to activate or deactivate the hourly chime. (If the day of the
week icons are displayed, then the hourly chime function is activated, if they are not
visible, then this function is deactivated.
Hourly chime off Hourly chime on
3. Release the SPLIT/RESET key to return to normal time mode.
BATTERY REPLACEMENT
If nothing is visible on the LCD, or if it is dim, the battery needs to be replaced. Remove
the screws at the back of the unit, remove the battery and insert a new CR2032 battery
according to the polarity mark.
NOTE:
Attention! Please dispose of used batteries and main unit in an ecologically
safe manner.
PRECAUTIONS
- Do not subject the unit to excessive force or shock.
- Avoid contact with corrosive materials.
- Donotdisposeofthisunitinareasitmayexplode.
- Donotrechargethebatteriesanddonotdisposeoftheminare.
SPECIFICATIONS
WARRANTY
Marathon Watch Company warrants this item to be free from defects in material and
workmanship under normal use in accordance with care and usage instructions for
2 years from date of purchase from an authorized retailer. This warranty excludes
damage from misuse, abuse or any irregular application. Return the item to us properly
packaged accompanied with the original bill of sale. Please contact Customer Service at
1-800-822-4329toobtaintheshippingaddress.Ifweconrmadefect,wewillreplaceit
with the same item or one of similar value and return it to you at no charge.
MANUAL ENGLISH
Marathon Watch Company Ltd.
www.MarathonWatch.com
Customer Service: / Service à la clientèle : / Servicio al cliente:
1-800-822-4329
Designed in Canada / Conçu au Canada / Diseñado en Canadá
Made in China / Fabriqué en Chine / Hecho en China
2 YEAR
warranty
Garantie
de 2 ANS
2 años de
garantía
Operating temperature: -5 °C to 50 °C (-40 °F to 140 °F)
Operating humidity: 10% to 90%
Water resistance level: IPX4
Main power: One CR2032 battery
Dimensions: 66.5 (W) x 77 (H) x 19 (T) mm
  • Page 1 1
  • Page 2 2

Marathon ST083022 User manual

Marathon
Brand
Marathon
Model
ST083022
Category
Watches
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents