Ref. 91637
EAN 4043619916375
Specification
• Supports 40-pin and 44-pin IDE standard
Supports SD-Card, MS (Memory Stick), MMC
(Multi Media Card) and xD-Card
For installation into a 3½“ front bay or the backside of the PC
Powered by 4-pin Floppy connector or 44-pin IDE connector
Supports jumper for master and slave setting
Special feature
Bootable
System requirement
Package content
IDE Card Reader
Power cable
Slotbracket
User manual
Package
• Retail box
•
•
•
•
•
•
•
•
•
•
• PC with a free a 3½” bay or PCI Slot
IDE port on the motherboard
Windows, Mac and Linux
•
IDE 3½“ Card Reader 4in1
The Card Reader can be installed either
into a 3½” front bay or with the enclosed
slot bracket into a PCI slot on the backside
of your PC and will be connected from its
IDE port to the motherboard. The device
enables you to read and write SD-Card,
MS, MMC and xD-Card. Furthermore the
Card Reader is bootable.
Description
DATA SHEET
W W W.DELOCK.COM
© 2008 by Delock. Alle hier aufgeführten Namen und Zeichen sind Eigentum des jeweiligen Herstellers. Druckfehler,
Änderungen, Lieferzeiten & Irrtümer vorbehalten.
/