Lorex Technology SC21FD3088 User manual

Category
Video switches
Type
User manual

This manual is also suitable for

Lorex Technology SC21FD3088UQH-8PK is a versatile security camera system that offers multiple connection options to meet your specific monitoring needs. With three connection scenarios, you can customize your surveillance setup based on the number of cameras and monitoring systems you require.

Scenario #1: Direct connection of all cameras to the Observation System without using the SHS Switchers. This scenario is suitable if you want to monitor all cameras on a single system.

Scenario #2: Connecting 4 cameras to the Observation System and 4 cameras to the switcher. This allows you to have two separate monitoring systems, giving you flexibility in viewing different areas or assigning specific cameras to different displays.

Lorex Technology SC21FD3088UQH-8PK is a versatile security camera system that offers multiple connection options to meet your specific monitoring needs. With three connection scenarios, you can customize your surveillance setup based on the number of cameras and monitoring systems you require.

Scenario #1: Direct connection of all cameras to the Observation System without using the SHS Switchers. This scenario is suitable if you want to monitor all cameras on a single system.

Scenario #2: Connecting 4 cameras to the Observation System and 4 cameras to the switcher. This allows you to have two separate monitoring systems, giving you flexibility in viewing different areas or assigning specific cameras to different displays.

MODEL SC21FD3088UQH-8PK
SC21FD3088 / SHS-4QM Combo Pack
8 x SHS-4QM Cameras with Adaptor Cables
Connection: There are 3 connection methods for using the equipment provided with
your Combo pack:
Scenario #1: Connect the cameras to the System, not using the SHS Switchers
STEP 1:
Connect the Cameras to the Observation System :
• Connect the Adaptor Cables to the Cameras
• Connect the Cameras to the CH1~8 DIN Inputs on the back of the System.
NOTE:
You do not need the switcher in
this scenario.
1 x SC21 Observation
System
MODEL SC21CD5444UQH-4PK
SC21CD5444 / SHS-4QM Combo Pack
4 x SHS-4QM Cameras with Adaptor Cables
Scenario #2: Connect 4 cameras to the System, and 4 cameras to the switcher. This
allows you to have 2 separate monitoring systems.
STEP 1:
Connect the Cameras to the Observation System :
• Connect the Adaptor Cables to the Cameras
• Connect the Cameras to the CH1~4 DIN Inputs
on the back of the System.
1 x SC21 Observation
System
STEP 2:
• Connect 4 of the Cameras to the Switcher. Connect the adaptor to the switcher and plug into a wall outlet
• Connect the switcher to a TV using the AV Cable. Switch to the Video Input to view the switcher.
MODEL SC21CD5444UQH-4PK
SC21CD5444 / SHS-4QM Combo Pack
Scenario #3: Connect the 4 Cameras to the Switcher, and connect the switcher to the
System. Repeat for the second switcher. Purchase additional Cameras for the other
open Ports on the System.
1 x SC21 Observation
System
STEP 1:
• Connect the Cameras to the Switcher. Connect the adaptor to the switcher and plug into a wall outlet
STEP 2:
• Connect the switcher to the System on one of the BNC ports.
NOTE: You will need to purchase a separate BNC Adaptor to put the Switcher on the System
STEP 3:
•Set the Switcher to SEQUENCE Mode, so all 4 cameras will be displayed on One channel of the System.
Turn your system into a 32-camera Switching DVR (4 cameras per
channel) by purchasing 3 additional SG7221B-4PK at
http://dealscctv.lorextechnology.com/product.aspx?id=1884
  • Page 1 1
  • Page 2 2
  • Page 3 3

Lorex Technology SC21FD3088 User manual

Category
Video switches
Type
User manual
This manual is also suitable for

Lorex Technology SC21FD3088UQH-8PK is a versatile security camera system that offers multiple connection options to meet your specific monitoring needs. With three connection scenarios, you can customize your surveillance setup based on the number of cameras and monitoring systems you require.

Scenario #1: Direct connection of all cameras to the Observation System without using the SHS Switchers. This scenario is suitable if you want to monitor all cameras on a single system.

Scenario #2: Connecting 4 cameras to the Observation System and 4 cameras to the switcher. This allows you to have two separate monitoring systems, giving you flexibility in viewing different areas or assigning specific cameras to different displays.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI