ASRock Rack C236 WSI4-85L Installation guide

C236 WSI4-85L
ASRock Rack
Brand
ASRock Rack
Model
C236 WSI4-85L
Type
Installation guide

This manual is also suitable for

ASRock Rack C236 WSI4-85L is an advanced server motherboard designed for high-performance computing and storage applications. Featuring the Intel C236 chipset and supporting the LGA1151 socket, it delivers exceptional processing power and flexibility. With four DDR4 DIMM slots, it can handle up to 128GB of ECC or non-ECC memory, ensuring smooth multitasking and data handling. It provides multiple expansion options with two PCI-Express 3.0 x16 slots, two PCI-Express 3.0 x8 slots, and one M.2 slot, allowing you to add graphics cards, network adapters, and storage devices as needed.

ASRock Rack C236 WSI4-85L is an advanced server motherboard designed for high-performance computing and storage applications. Featuring the Intel C236 chipset and supporting the LGA1151 socket, it delivers exceptional processing power and flexibility. With four DDR4 DIMM slots, it can handle up to 128GB of ECC or non-ECC memory, ensuring smooth multitasking and data handling. It provides multiple expansion options with two PCI-Express 3.0 x16 slots, two PCI-Express 3.0 x8 slots, and one M.2 slot, allowing you to add graphics cards, network adapters, and storage devices as needed.

1
Guide to SATA Hard Disks
Installation and RAID Conguration
1. Guide to SATA Hard Disks Installation ..............................2
1.1 Serial ATA (SATA) Hard Disks Installation ................2
2. GuidetoRAIDCongurations ...........................................3
2.1 Introduction of RAID .................................................3
2.2 RAIDCongurationPrecautions ..............................6
2.3 InstallingWindows®OSWithRAIDFunctions .........7
2.4 ConguringaRAIDarrayUsingIntelRAIDBIOS ....8
2
1. Guide to SATA Hard Disks Installation
1.1 Serial ATA (SATA) Hard Disks Installation
IntelchipsetsupportsSerialATA(SATA)harddiskswithRAID
functions,includingRAID0,RAID1,RAID5,RAID10andIntel
RapidStorage.PleasereadtheRAIDcongurationsinthis
guidecarefullyaccordingtotheIntelsouthbridgechipsetthat
yourmotherboardadopts.YoumayinstallSATAharddiskson
thismotherboardforinternalstoragedevices.Thissectionwill
guideyouhowtocreateRAIDonSATAports.
3
2. GuidetoRAIDCongurations
2.1 Introduction of RAID
ThismotherboardadoptsIntelsouthbridgechipsetthatinte-
gratesRAIDcontrollersupportingRAID0/RAID1/IntelRapid
Storage/RAID10/RAID5functionwithfourindependentSe-
rialATA(SATA)channels.Thissectionwillintroducethebasic
knowledgeofRAID,andtheguidetocongureRAID0/RAID
1/IntelRapidStorage/RAID10/RAID5settings.
RAID
Theterm“RAID”standsfor“RedundantArrayofIndependent
Disks”,whichisamethodcombiningtwoormoreharddisk
drivesintoonelogicalunit.Foroptimalperformance,please
installidenticaldrivesofthesamemodelandcapacitywhen
creatingaRAIDset.
RAID 0 (Data Striping)
RAID0iscalleddatastripingthatoptimizestwo
identicalharddiskdrivestoreadandwritedata
inparallel,interleavedstacks.Itwillimprovedata
accessandstoragesinceitwilldoublethedata
transferrateofasinglediskalonewhilethetwo
harddisksperformthesameworkasasingle
drivebutatasustaineddatatransferrate.
WARNING!!
AlthoughRAID0functioncanimprovetheaccessperformance,
it does not provide any fault tolerance. Hot-Plug any HDDs of
theRAID0Diskwillcausedatadamageordataloss.
RAID 1 (Data Mirroring)
RAID1iscalleddatamirroringthatcopiesand
maintainsanidenticalimageofdatafromone
drivetoaseconddrive.Itprovidesdataprotection
andincreasesfaulttolerancetotheentiresystem
sincethediskarraymanagementsoftwarewill
directallapplicationstothesurvivingdriveasit
4
Intel Rapid Storage
TheIntelRapidStoragetechnologysupportedallowsyouto
createaRAID0andRAID1setusingonlytwoidenticalhard
diskdrives.TheIntelRapidStoragetechnologycreatestwo
partitionsoneachharddiskdrivetocreateavirtualRAID0
andRAID1sets.Thistechnologyalsoallowsyoutochange
theharddiskdrivepartitionsizewithoutlosinganydata.
RAID 10
RAID10isastripedcongurationwithRAID1segments
whosesegmentsareRAID1arrays.Thiscongurationhasthe
samefaulttoleranceasRAID1,andhasthesameoverhead
forfault-toleranceasmirroringalone.RAID10achieveshigh
input/outputratesbystripingRAID1segments.Insome
instances,aRAID10congurationcansustainmultiplesimul-
taneousdrivefailure.Aminimumoffourharddiskdrivesis
requiredforthissetup.
5
RAID 5
RAID5stripesbothdataandparityinformationacrossthreeor
moreharddiskdrives.AmongtheadvantagesofRAID5con-
gurationincludebetterHDDperformance,faulttolerance,and
higherstoragecapacity.TheRAID5congurationisbestsui-
tedfortransactionprocessing,relationaldatabaseapplications,
enterpriseresourceplanning,andotherbusinesssystems.Use
aminimumofthreeidenticalharddiskdrivesforthissetup.
6
2.2 RAID Congurations Precautions
1. PleaseusetwonewdrivesifyouarecreatingaRAID
0(striping)arrayforperformance.Itisrecommended
tousetwoSATAdrivesofthesamesize.Ifyouuse
twodrivesofdifferentsizes,thesmallercapacityhard
diskwillbethebasestoragesizeforeachdrive.For
example,ifoneharddiskhasan80GBstoragecapa-
cityandtheotherharddiskhas60GB,themaximum
storagecapacityforthe80GB-drivebecomes60GB,
andthetotalstoragecapacityforthisRAID0setis
120GB.
2. Youmayusetwonewdrives,oruseanexistingdrive
andanewdrivetocreateaRAID1(mirroring)array
fordataprotection(thenewdrivemustbeofthe
samesizeorlargerthantheexistingdrive).Ifyou
usetwodrivesofdifferentsizes,thesmallercapacity
harddiskwillbethebasestoragesize.Forexample,
ifoneharddiskhasan80GBstoragecapacityand
theotherharddiskhas60GB,themaximumstorage
capacityfortheRAID1setis60GB.
3. Pleaseverifythestatusofyourharddisksbeforeyou
setupyournewRAIDarray.
WARNING!!
  PleasebackupyourdatarstbeforeyoucreateRAIDfunctions.
  IntheprocessyoucreateRAID,thesystemwillaskifyouwant
  to“ClearDiskData”ornot.Itisrecommendedtoselect“Yes”,
  andthenyourfuturedatabuildingwilloperateunderaclean
  environment.
7
2.3 Installing Windows® OS With RAID Functions
IfyouwanttoinstallWindows®OSonyourSATAHDDswith
RAIDfunctions,pleasefollowtheproceduresbelow.
STEP 1: Set up UEFI.
A.EnterUEFISETUPUTILITYAdvancedscreen
StorageConguration.
 B.Set“SATAModeSelection”to[RAID].
STEP 2: Set RAID conguration.
Pleaserefertop.8-11ofthisdocumentforinstructionsonhow
tosetRAIDconguration.
STEP 3: Install Windows® OS on your system.
8
2.4 Configuring a RAID array Using Intel RAID
BIOS
Reboot your computer. Wait until you see the RAID software
promptingyoutopress<Ctrl+I>.
 Press<Ctrl+I>.Then,theIntelRAIDUtility-Create RAID
Volumewindowappears.
 IntheCreateVolumeMenu,underNameitem,pleasekey-ina
uniquenamewith1-16lettersforyourRAIDvolumethenpress
<Enter>.
9
Use the up or down arrow keys to select your desired RAID
Level.YoumayselectRAID0(Stripe),RAID1(Mirror),RAID
5orRAID10foryourRAIDlevel.Press<Enter>,andthenyou
can select Strip Size.
If you selected RAID 0 (Stripe), use the up or down keys to
selectthestripesizeforyourRAID0arraythenpress<Enter>.
Theavailablevaluesrange from 8KBto128 KB.Thedefault
selection is 128 KB. The strip value should be chosen based
ontheplanneddriveusage.
•8/16KB-lowdiskusage
•64KB-typicaldiskusage
•128KB-performancediskusage
 Afteryousetdiskblocksize,press<Enter>tosetdisk
Capacity.
10
 AftersettingupCapacity,pleasepress<Enter>.
Press<Enter>undertheCreate Volumeitem.Theutility
promptsaconrmationmessageasbelow.
11
 Press<Y>tocompletethesetupofRAID.
Afterthecompletion,youwillseethedetailedinformationabout
theRAIDthatyousetup.
 PleasenotethatyouareonlyallowedtocreateoneRAID
partitionatatimeunderBIOS RAID environment. Ifyouwant
to create an extra RAID partition, please use the RAID utility
underWindowsenvironmenttocongureRAIDfunctionsafter
youinstallOS.
 Ifyouwant todeleteaRAIDvolume,pleaseselecttheoption
Delete RAID Volume,press<Enter>,andthenfollowthe
instructionsonthescreen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

ASRock Rack C236 WSI4-85L Installation guide

C236 WSI4-85L
ASRock Rack
Brand
ASRock Rack
Model
C236 WSI4-85L
Type
Installation guide
This manual is also suitable for

ASRock Rack C236 WSI4-85L is an advanced server motherboard designed for high-performance computing and storage applications. Featuring the Intel C236 chipset and supporting the LGA1151 socket, it delivers exceptional processing power and flexibility. With four DDR4 DIMM slots, it can handle up to 128GB of ECC or non-ECC memory, ensuring smooth multitasking and data handling. It provides multiple expansion options with two PCI-Express 3.0 x16 slots, two PCI-Express 3.0 x8 slots, and one M.2 slot, allowing you to add graphics cards, network adapters, and storage devices as needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents