Planet ICA-4130S Quick start guide

ICA-4130S
Planet
Brand
Planet
Model
ICA-4130S
Category
Network switches
Type
Quick start guide

This manual is also suitable for

Planet ICA-4130S is an ultra-mini dome IP camera that offers high-quality video surveillance with a range of features for enhanced security and remote monitoring. With its 1/2.5" Progressive Scan CMOS image sensor, this camera delivers crisp and detailed images, even in low-light conditions. The infrared LED illumination provides night vision up to 10 meters, ensuring 24/7 surveillance. Additionally, the built-in microphone allows for audio recording, providing a more comprehensive monitoring experience.

Planet ICA-4130S is an ultra-mini dome IP camera that offers high-quality video surveillance with a range of features for enhanced security and remote monitoring. With its 1/2.5" Progressive Scan CMOS image sensor, this camera delivers crisp and detailed images, even in low-light conditions. The infrared LED illumination provides night vision up to 10 meters, ensuring 24/7 surveillance. Additionally, the built-in microphone allows for audio recording, providing a more comprehensive monitoring experience.

VERIFY THE CONTENTS INSIDE THE BOX
The package should contain the items plus Ultra-mini Dome IP Camera.
If any item is missing or damaged, please contact the seller immediately.
x 2
x 2
Quick Installation Guide CD-ROM Wall-mount Kit
Step 1 : Hardware Overview
Reset Button
MicroSD/SDHC
Card Slot
Ethernet Port (PoE)
Audio in
ICA-4130S
Reset Button
MicroSD/SDHC
Card Slot
Ethernet Port (PoE)
Audio in
Image Sensor IR LED
ICA-4230S
Step 2 : Case Disassembly
Press and hold the spring latch
by the case edge
Slide the latch down to open
the case
Step 3 : Connecting Network and PoE
PoE Ethernet Switch ICA-4130S / ICA-4230S
Laptop
(192.168.0.X)
PoE
Note: The cameras support IEEE802.3af and are only powered from PoE.
Step 4 : Running installer utility to locate the IP camera
Insert the CD-ROM supplied in the product package and the CD
will automatically run the installation. If not, please click the Smart
Discovery Lite utility hyperlink to install.
After the camera utility is launched, all cameras found in your local area
network will be displayed.
Interface Description
Audio in User can enable the function of the built-in
microphone via audio setting in the Web UI.
Ethernet Port
(PoE)
The LAN socket is an RJ-45 connector for
connection to 10Base-T Ethernet or 100Base-TX
Fast Ethernet cabling. Not only can this Ethernet
port detect or negotiate the transmission speed
of the network automatically but also input power
for camera operation. Please use Category 5 cable
to connect the Network Camera to a 802.3af PoE
network switch.
Image sensor 1/2.5" Progressive Scan CMOS.
IR LED IR distance is up to 10 meters.
Micro-SD/SDHC
card slot
User can insert a micro SD card into this slot for
event recording.
Reset button
This button is used to restore all the factory
default settings. Sometimes restarting the camera
will make the system return to a normal state.
If the system still got problems after restart,
user can restore the factory default settings and
congure it again. To restore the device, please
follow the steps below:
1. Press "Reset" button for 5 seconds to reset the
device to the factory default.
2. Login the camera using the default IP
(http://192.168.0.20), with “admin” for both
username and password.
Note
Restoring the factory default setting
will lose all the previous settings
including IP address forever. User
needs to back up conguration
le in advance before restoring for
convenience.
Step 5 : Bring up the web page for further conguration
Select the IP Camera you want to congure and input its IP address
into the browser search bar.
The IP Camera will be connected via web browser automatically; the IP
Camera will prompt for logon user name and password. Please enter
admin as the default user name and password.
When the device is logged on for the rst time, the browser will prompt
to install controls; please click "click here to download and install
controls manually".
Follow the prompts to install the controls. When the installation is
nished, a window as shown in the table below will appear. Please click
“Finish” and refresh the browser, and then you will see the video.
Note: If IE9 or higher version browser is used, it is suggested that the
PLANET camera web link should be added as a trusted site.
Appendix A : Default Setting
Default DHCP Client On
Default IP Address 192.168.0.20 – if DHCP does not exist in
the network
Default Login User Name admin
Default Login Password admin
Search Tools Smart Discovery Lite
Further Conguration
For detailed conguration, please check user’s manual on the bundled CD.
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the following
email address: [email protected]
  • Page 1 1
  • Page 2 2

Planet ICA-4130S Quick start guide

ICA-4130S
Planet
Brand
Planet
Model
ICA-4130S
Category
Network switches
Type
Quick start guide
This manual is also suitable for

Planet ICA-4130S is an ultra-mini dome IP camera that offers high-quality video surveillance with a range of features for enhanced security and remote monitoring. With its 1/2.5" Progressive Scan CMOS image sensor, this camera delivers crisp and detailed images, even in low-light conditions. The infrared LED illumination provides night vision up to 10 meters, ensuring 24/7 surveillance. Additionally, the built-in microphone allows for audio recording, providing a more comprehensive monitoring experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents